Single Element Fittings – Electro-Meters https://www.electro-meters.com/product-category/compression-seal-fittings/single-element-fittings/ Technology for all your measurement needs Fri, 29 Apr 2022 14:17:44 +0000 en-US hourly 1 https://wordpress.org/?v=7.0 https://www.electro-meters.com/wp-content/uploads/images/electro-meters/cropped-EMlogo_square-32x32.png Single Element Fittings – Electro-Meters https://www.electro-meters.com/product-category/compression-seal-fittings/single-element-fittings/ 32 32 Conax EG Series – Power Compression Seal Feedthrough https://www.electro-meters.com/product/eg-series-power-compression-seal-feedthrough/ Wed, 10 Feb 2021 15:23:05 +0000 https://www.electro-meters.com/product/import-placeholder-for-42750/
  • Seals 1 Electrode or Element
  • For Gas or Non-Conductive Liquid
  • Stainless Steel Reusable Fitting
  • "Soft Sealant"
  • Electrode Easily Assembled or Replaced in Field

    • The post Conax EG Series – Power Compression Seal Feedthrough appeared first on Electro-Meters.

    ]]>     These glands are used for bare electrical feedthroughs in such applications as vacuum furnaces, liquid level probes, transformers, environmental chamber power leads, etc. And are ideal for electrically and or thermally isolate electrodes, tubes or temperature sensors.

    • Wires Easily Assembled or Replaced In Field
    • Temperature Range From -300°F to +1600°F (-185°C to +870°C)
    • Pressure: Vacuum to 8,000 PSI (551 bar)
    • Voltage: To 2000 VDC
    • Amperage: To 400A
    • Available Without Electrode
    • Reusable

    The post Conax EG Series – Power Compression Seal Feedthrough appeared first on Electro-Meters.

    ]]>         Conax EGT Series – Power Compression Seal Feedthrough https://www.electro-meters.com/product/egt-series-power-compression-seal-feedthrough/ Wed, 10 Feb 2021 15:23:05 +0000 https://www.electro-meters.com/product/import-placeholder-for-42753/
  • Electrode Teflon Sealing Gland
  • Seals 1 Electrode or Element
  • For Gas or Non-Conductive Liquid
  • Stainless Steel Reusable Fitting

    • The post Conax EGT Series – Power Compression Seal Feedthrough appeared first on Electro-Meters.

    ]]>     These glands are used for bare electrical feedthroughs in such applications as vacuum furnaces, liquid level probes, transformers, environmental chamber power leads, etc. And are ideal for electrically and or thermally isolate electrodes, tubes or temperature sensors.

    • Temperature Range From -300°F to +450°F (-185°C to +232°C)
    • Pressure: Vacuum to 2,500 PSI (170 bar)
    • Voltage: To 8000 VDC
    • Amperage: To 525 A
    • Available Without Electrode
    • Reusable

    The post Conax EGT Series – Power Compression Seal Feedthrough appeared first on Electro-Meters.

    ]]>         Conax PG Series (PG, MIC, MPG) – Compression Seal Fitting https://www.electro-meters.com/product/pg-series-pg-mic-mpg-compression-seal-fitting/ Wed, 10 Feb 2021 15:23:05 +0000 https://www.electro-meters.com/product/import-placeholder-for-42755/ Conax Technologies Model PG Packing Glands provide pressure/vacuum sealing for tubes, probes, pipe, cable or any single element assembly (not electrically isolating), including thermocouples, RTDs, thermometers, thermistor probes, capillary tubes, tubewells, multi-pair cables and analyzer sample tubes. PG glands seal against gases and liquids and resist element movement under pressure.

    The post Conax PG Series (PG, MIC, MPG) – Compression Seal Fitting appeared first on Electro-Meters.

    ]]>     PG gland bodies with NPT threads or SAE threads are constructed from 303SST standard. Weld-neck style gland bodies are constructed from 316LSST standard. Caps and followers for all styles are constructed from 303SST standard. Many optional materials are also available, including 316LSST, Monel 405, Hastelloy C276, Inconel and more. For information on alternative materials, see page 9. Cap Style A offers a mounting thread only. Cap Style B provides threading on both ends for attachment to conduit or terminal heads.

    • Temperature Range: -400° F to +1600° F (-240° C to +870° C), depending on sealant used
    • Pressure Range: Vacuum to 10,000 PSIg (690 bar)

    The post Conax PG Series (PG, MIC, MPG) – Compression Seal Fitting appeared first on Electro-Meters.

    ]]>         Conax MK Series – Metal Ferrule Compression Seal Fittings https://www.electro-meters.com/product/mk-series-metal-ferrule-compression-seal-fittings/ Wed, 10 Feb 2021 15:23:05 +0000 https://www.electro-meters.com/product/import-placeholder-for-42758/
  • Metal to Metal Seal
  • Seals 1 Element
  • For Gas or Liquid
  • Stainless Steel Throughout

    • The post Conax MK Series – Metal Ferrule Compression Seal Fittings appeared first on Electro-Meters.

    ]]>     Conax Technologies Model MK Midlock Fittings (sealing glands) seal a single tube or probe. Featuring a metal-to-metal seal rather than our standard soft sealant technology, MK fittings are used where a joint must be opened and resealed in the same setting. Their unique design forms the seal well within the body housing to provide superior performance in high vibration applications.

    • Easy To Use Slide Assembled Fitting Over Tube or Probe and Simply Tighten at Desired Location
    • Single Ferrule Is Self-Aligning (No Lost Pieces)
    • May Be Opened and Resealed
    • Temperature Range From Cryogenic to +1600°F (+870°C)
    • Pressure: Vacuum to 10,000 PSI (690 bar)
    • Suitable For High Vibration Applications

    The post Conax MK Series – Metal Ferrule Compression Seal Fittings appeared first on Electro-Meters.

    ]]>         Conax HEGPK Series – Power Compressions Seal Feedthrough https://www.electro-meters.com/product/hegpk-series-power-compressions-seal-feedthrough/ Wed, 10 Feb 2021 15:23:05 +0000 https://www.electro-meters.com/product/import-placeholder-for-42760/
  • Seals one electrode, conductor or element
  • Temperature Range: Vacuum to 7,700 PSIg (531 bar)
  • Voltage 8000 VDC
  • Amperage to 200 amps
  • Supplied with or without conductor

    • The post Conax HEGPK Series – Power Compressions Seal Feedthrough appeared first on Electro-Meters.

    ]]>     Like the EGT Feedthrough, Conax Technologies HEGPK Feedthroughs electrically and/or thermally isolate single electrodes, tubes or temperature sensors for use in vacuum furnaces, liquid level probes, transformers, environmental chambers, power leads and more. These bare electrical feedthroughs also seal against gases and liquids and resist electrode (also known as conductor) movement under pressure. The HEGPK Feedthrough differs from the EGT Feedthrough in that the single piece insulator/sealant is manufactured from PEEK™, which is recognized as one of the highest performing engineered thermoplastic materials currently available.

    The HEGPK Feedthroughs provide several distinct advantages over Conax’s EGT Feedthroughs :

    • HEGPK Feedthroughs have higher pressure ratings at room temperature (typically in excess of 250%), as compared to Conax’s EGT Feedthrough.
    • HEGPK Feedthroughs also have improved sealing performance at elevated temperatures, as compared to EGT Feedthroughs .

    The post Conax HEGPK Series – Power Compressions Seal Feedthrough appeared first on Electro-Meters.

    ]]>         Conax HPEG Series – Power Compression Seal Feedthrough https://www.electro-meters.com/product/hpeg-series-power-compression-seal-feedthrough/ Wed, 10 Feb 2021 15:23:05 +0000 https://www.electro-meters.com/product/import-placeholder-for-42763/
  • Each unit has a stepped electrode. Larger diameter of electrode is on the body side.
  • Electrode is copper (CU), stainless steel (SS) and nickel (NI)
  • Voltage rating 2000VDC
  • Body material is 316SS, ASTM 479
  • SST nuts and washers for NI and SS, brass for CU
  • All prices include a pressure test at 68°F

    • The post Conax HPEG Series – Power Compression Seal Feedthrough appeared first on Electro-Meters.

    ]]>     More Information

    The post Conax HPEG Series – Power Compression Seal Feedthrough appeared first on Electro-Meters.

    ]]>         Conax PGS Series – Split Compression Seal Fitting https://www.electro-meters.com/product/pgs-series-split-compression-seal-fitting/ Wed, 10 Feb 2021 15:23:05 +0000 https://www.electro-meters.com/product/import-placeholder-for-42765/
  • Seals 1 Element
  • For Gas or Liquid
  • Stainless Steel Fitting
  • Simple Assembly - Insert Element, Torque Cap
  • Replaceable Sealant Permits Repeated Use Of Fitting

    • The post Conax PGS Series – Split Compression Seal Fitting appeared first on Electro-Meters.

    ]]>     Conax Technologies offers three models of split fittings (glands) designed to facilitate assembly and sealant replacement when the diameter of the probe tip is larger than the diameter of the element(s) at the location of the seal. Split fittings provide split sealants, followers and seats to facilitate easy sealant change without removing the element(s) from the system.

    • Field Adjustable
    • Tube Stress Concentration Minimized
    • Temperature Range From -400°F to +1600°F (-185°C to +870°C)
    • Pressure: Vacuum to 10,000 PSI (690 bar)

    The post Conax PGS Series – Split Compression Seal Fitting appeared first on Electro-Meters.

    ]]>