Showing 11–20 of 106 results

Show sidebar
Show 10 20 30 All

Yokogawa AQ6370D – Telecom Optical Spectrum Analyzers

Notice: This product has been discontinued.
Replaced by: AQ6370E
  • Wavelength range: 600 to 1700nm
  • Built-in calibration source
  • High wavelength accuracy: ±0.01nm
  • High wavelength resolution: 0.02nm
  • Wide dynamic range: 78dB typ.
  • Wide level range: +20 to -90dBm
  • Fast measurement: 0.2 sec. (100nm span)
  • Applicable to single-mode and multi-mode fibers

Yokogawa AQ6370E – Telecom Optical Spectrum Analyzers

  • Wavelength Range: 600 nm to 1700 nm
  • Wavelength Accuracy: ±0.008 nm (typical)
  • Wavelength Resolution: 0.02 nm
  • Close-in Dynamic Range: 78 dB (typical)
  • Level Range: +20 to -90 dBm
  • Up to 2x faster measurement with SMSR mode
  • Sharper spectrum measurement with HCDR mode
  • Large touchscreen LCD for easy operation and data visualization

Yokogawa WT5000 – Precision Power Analyzers

, ,
  • Sample Rate: 10 MS/s
  • Power Bandwidth: 1 MHz
  • Resolution: 18 bit
  • Elements: 1-7
  • Accuracy: 0.03%
  • 10.1″ touchscreen

Yokogawa 2553A – Precision DC Calibrator

,
  • Intuitive operation: Dials and switches are provided for each digit and function, and traditional 7-segment LEDs provide clear visibility
  • High resolution: 5.5 digits ±120000 count output resolution
  • DC Voltage: ±10 mV to ±30 V
  • DC Current: ±1 mA to ±100 mA
  • Voltage accuracy: +/- 75 ppm
  • Current accuracy: +/- 120 ppm
  • Temperature calibration: 10 types of thermocouples including K, T, E, and J types
  • User-defined thermocouple and RTD (PT1000) calibration: Generates various types of thermocouple and RTD by extrapolating the relation between voltage and temperature

Yokogawa LS3300 – AC Power Calibrator

,
  • High Accuracy:
    • AC Voltage: ±350 ppm
    • AC Current: ±450 ppm
    • AC Power: ±450 ppm
  • Phase Accuracy: ±0.03Ëš at 50/60 Hz
  • High Stability:
    • AC voltage: ±50 ppm/h
    • AC current: ±50 ppm/h
    • AC power: ±100 ppm/h
  • Wide Generation Range:
    • AC voltage: 10 mV to 1250 V
    • AC current: 0.3 mA to 62.5 A
    • Frequency: 40 to 1200 Hz

Yokogawa 2558A – Precision AC Standard

,
  • Intuitive operation: Dials and switches are provided for each digit and function, and traditional 7-segment LEDs provide clear visibility
  • 6 voltage ranges (100 m/1/10/100/300/1000 V)
  • 4 current ranges (100 m/1/10/50 A)
  • Sweep (Voltage/Current/Frequency)
  • Output Divider: Linearity tests can be simply performed by dividing the output into steps. For example, a setting of 4 will generate steps of 25, 50, 75 and 100% of the set output value.
  • % Deviation readout
  • Common current output terminals: The same output terminals are used for all current ranges. Test times are therefore reduced by avoiding the need to change the wiring for meters which have different ranges.
  • Wide frequency range-: 40 to 1000 Hz (Frequency accuracy : ±50 ppm)

Yokogawa 2560A – Precision DC Calibrator

,
  • Intuitive operation: Dials and switches are provided for each digit and function, and traditional 7-segment LEDs provide clear visibility
  • High resolution: 5.5 digits ±120000 count output resolution
  • Accuracy:
    • DC voltage: ±50 ppm
    • DC current: ±70 ppm
  • Resolution:
    • 5.5 digits, ±120000 count display
    • 6.5 digits, ±1200000 count display – high res.
  • Direct readout of the deviation
  • Digital display of output
  • Output Divider
  • Sweep: With a flick of a switch, the output can be swept within the source range with sweep times of 8, 16, 32 or 64 seconds.
  • High stability
    • DC voltage: ±10 ppm/h
    • DC current: ±20 ppm/h

Yokogawa 30032A – Clamp-on Tester

,
  • Leakage current measurement range from 3mA to 60A
  • Diameter of measurable conductor: 40 mm max.
  • Easier and clear display

Yokogawa AQ1100 – Multi-function Optical Loss Test Sets

  • 5.7 inch color LCD for easy viewing
  • Multi-core fiber measurement with a pair set
  • Optional PING Test function and Visible light Source
  • Optical Power Meter Selections
    • Standard: +10 to -70dBm
    • High power: +27 to -50dBm
    • PON : 1490/1550nm Parallel measurement
  • Light Sources (3 models)
    • SM1310/1550nm
    • SM1310/1550/1625nmMM850/1300nm and SM1310

Yokogawa AQ2170/2170H – Portable Optical Power Meters

  • AQ2170 – +10 dBm max. power (Standard)
  • AQ2170H – +26 dBm max. power (High Power)
  • Up to 7 working wavelengths
  • Compact and lightweight
  • Versatile data storage and transfer large memory capacity stores up to 999 measurement results
  • Auto switching of measurement wavelength