Siglent Distributor in Canada – Electro-Meters https://www.electro-meters.com/manufacturers/siglent/ Technology for all your measurement needs Tue, 30 Sep 2025 16:27:38 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 https://www.electro-meters.com/wp-content/uploads/images/electro-meters/cropped-EMlogo_square-32x32.png Siglent Distributor in Canada – Electro-Meters https://www.electro-meters.com/manufacturers/siglent/ 32 32 Siglent SDG3000X – Arbitrary Waveform Generator https://www.electro-meters.com/product/siglent-sdg3000x-arbitrary-waveform-generator/ Mon, 29 Sep 2025 18:29:47 +0000 https://www.electro-meters.com/?post_type=product&p=29509
  • Maximum output amplitude 20 Vpp
  • Rich analog and digital modulation functions: AM, DSB-SC, FM, PM, FSK, ASK, PSK and PWM
  • Sweep and Burst functions
  • Harmonic function
  • Waveform Combining function
  • 196 built-in arbitrary waveforms
  • Built-in WebServer supports instrument control via web browser
  • 7-inch display touch screen

    • The post Siglent SDG3000X – Arbitrary Waveform Generator appeared first on Electro-Meters.

    ]]>     The SDG3000X series is a dual-channel function and arbitrary waveform generator offering up to 200 MHz bandwidth. It features a high-performance sampling system with a 1.2 GSa/s sampling rate and 16-bit vertical resolution. While based on traditional DDS technology, it incorporates innovative TrueArb and EasyPulse technologies to address the typical limitations of DDS in generating arbitrary waveforms and square/pulse signals. These enhancements enable the SDG3000X to deliver high-fidelity, low-jitter signal outputs. Additionally, it supports PRBS pattern generation, sequencing, dual-pulse, and vector signal outputs, making it suitable for a wide range of applications.

    Features:

    • Dual channels, maximum output frequency of 200 MHz, and up to 20 Vpp output amplitude
    • 1.2 GSa/s sampling rate with 16-bit vertical resolution
    • TrueArb technology for point-by-point arbitrary waveform output with low jitter (10 mSa/s ~ 600 MSa/s)
    • Sequence wave playback supported, with up to 40 Mpts waveform memory per channel
    • EasyPulse technology enables low-jitter square/pulse wave output with fine control over width and edges
    • Dual pulse output function for evaluating dynamic characteristics of power devices
    • Supports PRBS (Pseudo-Random Binary Sequence) up to 120 Mbps
    • Extensive modulation capabilities: AM, DSB-SC, FM, PM, FSK, ASK, PSK, PWM
    • Sweep and Burst functionality
    • Harmonic and waveform combining functions
    • High-precision frequency counter
    • 196 built-in arbitrary waveforms
    • Standard interfaces: USB Host, USB Device (USBTMC), LAN (VXI-11); optional GPIB
    • Built-in WebServer allows control via web browser
    • 7-inch touchscreen display

    The post Siglent SDG3000X – Arbitrary Waveform Generator appeared first on Electro-Meters.

    ]]>         Siglent SDM4065A Series – Digital Multimeter https://www.electro-meters.com/product/siglent-sdm4065a-series-digital-multimeter/ Fri, 26 Sep 2025 15:08:44 +0000 https://www.electro-meters.com/?post_type=product&p=29506
  • Real 6½ digits readings resolution (2,200,000 counts)
  • Up to 50k rdgs/s of measurement speed
  • 512 MB RAM, capable of saving up to 2M readings for caching
  • Equipped with EasyDMM-X host computer control and sampling software
  • 5-inch true color TFT-LCD display

    • The post Siglent SDM4065A Series – Digital Multimeter appeared first on Electro-Meters.

    ]]>     The SDM4065A is a 6½-digit digital multimeter featuring exceptional measurement accuracy and a touch-sensitive screen. It is designed to meet the demands of high-precision, multifunctional, and automated measurement applications.

    Features

    • 5-inch true color TFT-LCD display (800 × 480 resolution) with touchscreen and redesigned user interface
    • Real 6½-digit (2,200,000 count) measurement resolution
    • Measurement speed up to 50,000 readings/second, with sampling intervals ranging from 100 PLC to 0.001 PLC
    • 512 MB RAM supports caching up to 2 million readings with timestamp support
    • 256 MB NAND Flash for storing readings, images, and configuration files
    • Four trigger modes: Auto, Single, External, and Level Trigger
    • Four display modes: Numerical, Bar Meter, Trend Chart, and Histogram
    • DC measurements support auto-zero function
    • True-RMS measurement for AC Voltage and AC Current
    • Automatic switching between 10 A (high) and 3 A (low) current modes; supports up to 30 A with external shunt
    • Supports RTD, thermocouple, and user-defined sensors
    • Dual display and probe hold functionality
    • Supports standard SCPI remote control commands
    • Bundled with EasyDMM-X host control and data acquisition software
    • Communication interfaces: USB Device (optional USB-GPIB adapter), USB Host, and LAN
    • Supports BNC VMC output and trigger input
    • Remote access via VNC and built-in web server
    • Multilingual menu (Chinese/English) with built-in help system for easy information retrieval

    The post Siglent SDM4065A Series – Digital Multimeter appeared first on Electro-Meters.

    ]]>         Siglent SAP5000D High Bandwidth Differential Active Probe https://www.electro-meters.com/product/siglent-sap5000d-high-bandwidth-differential-active-probe/ Mon, 16 Sep 2024 16:10:07 +0000 https://www.electro-meters.com/?post_type=product&p=28682
  • Bandwidth: DC to over 5 GHz
  • Single-ended input resistance: 10 kΩ
  • Differential input resistance: 20 kΩ
  • Gain: ÷10
  • Differential input capacitance: 400 fF
  • Input dynamic range: ±2.5 V
  • Offset voltage setting range: ±12 V
  • SAPBus interface for power and communication

    • The post Siglent SAP5000D High Bandwidth Differential Active Probe appeared first on Electro-Meters.

    ]]>     The SAP5000D is a high-bandwidth differential active probe designed for measuring high-speed signals, offering features like high bandwidth, low noise, and high input impedance. Its high input resistance and low input capacitance minimize the load on the measurement system, ensuring accurate results.

    The SAP5000D utilizes the SAPBus interface and is compatible with oscilloscopes that support it, such as the SDS3000X HD, SDS5000X, SDS6000 Pro, and SDS7000A series. The SAP series active probes do not require external power, as the oscilloscope supplies both power and communication through the SAPBus interface. Once connected, the oscilloscope can automatically read probe information directly from its interface.

    The post Siglent SAP5000D High Bandwidth Differential Active Probe appeared first on Electro-Meters.

    ]]>         Siglent SAP4000P Power Rail Probe https://www.electro-meters.com/product/siglent-sap4000p-power-rail-probe/ Fri, 13 Sep 2024 18:21:17 +0000 https://www.electro-meters.com/?post_type=product&p=28677
  • Bandwidth 4 GHz
  • Low frequency resistance 20 kΩ
  • High frequency resistance 50 Ω
  • Offset voltage range ±24 V
  • Attenuation ratio 1.1:1
  • Dynamic range ±600 mV

    • The post Siglent SAP4000P Power Rail Probe appeared first on Electro-Meters.

    ]]>     SIGLENT offers customers a high-precision solution for power rail measurements. The SAP4000P power rail probe supports transient event analysis up to 4 GHz, with its low-noise performance effectively distinguishing between oscilloscope and probe noise, as well as the ripple and noise from the DC power supply being tested. Its ±24 V offset voltage range allows for easy adjustment of dynamic signals with a DC component, positioning them near the oscilloscope’s centerline. Additionally, the wide dynamic range of ±600 mV enables accurate observation of voltage droop when high current is drawn by the load or during transient events on higher voltage rails. The probe’s high 50 kΩ impedance at low frequencies minimizes load effects and interference with the power supply, while the low 50 Ω impedance at high frequencies ensures compatibility with coaxial cables, increasing the test bandwidth.

    The post Siglent SAP4000P Power Rail Probe appeared first on Electro-Meters.

    ]]>         Siglent SNA6000A Vector Network Analyzer https://www.electro-meters.com/product/siglent-sna6000a-vector-network-analyzer/ Tue, 10 Sep 2024 04:59:01 +0000 https://www.electro-meters.com/?post_type=product&p=28654
  • Frequency Range: 100 kHz – 13.5 GHz and 100 kHz – 26.5 GHz
  • Frequency Resolution: 1 Hz
  • Output Level Setting Range: -55 dBm to +10 dBm
  • Dynamic Range: 135 dB
  • Supported Ports: 2/4 ports for S-parameters, Balance Measurements, and Time Domain Analysis
  • Measurement Types: Scattering parameter measurement, differential parameter measurement, receiver measurement, time-domain parameter analysis, limit test, ripple test, impedance conversion, fixture simulation, adapter removal/insertion, spectrum analysis frequency offset, scalar mixer measurement, pulse measurement, Material Measurement
  • ECal Kits Compatibility: Compatible with ECal kits from several manufacturers
  • 12.1" touch screen

    • The post Siglent SNA6000A Vector Network Analyzer appeared first on Electro-Meters.

    ]]>     The SIGLENT SNA6000A series of Vector Network Analyzers offer a frequency range of 100 kHz to 13.5 GHz and 100 kHz to 26.5 GHz, supporting 2/4-port scattering parameter, differential-parameter, and time-domain parameter measurements. These VNAs are highly effective for analyzing the Q-factor, bandwidth, and insertion loss of filters. They come equipped with features such as impedance conversion, measurement plane movement, limit testing, ripple test, fixture simulation, and adapter removal/insertion adjustments. The SNA6000A series also provides five sweep modes: Linear-Frequency, Log-Frequency, Power-Sweep, CW-Time, and Segment-Sweep. Additionally, they support scattering-parameter corrections including SOLT, SOLR, TRL, Response, and Enhanced Response, offering increased flexibility for R&D and manufacturing applications.

    Compared to the earlier SNA5000A model, the SNA6000A offers a notable improvement in dynamic range, enhanced front-end configurability with adjustable jumpers, and a new X86 hardware architecture with a large 12.1-inch display. When used alongside the SIGLENT SSG6000A 40 GHz Generator and the Switch Matrix Port Extension, the company’s RF lineup delivers impressive performance and application support at a highly competitive value.

    The post Siglent SNA6000A Vector Network Analyzer appeared first on Electro-Meters.

    ]]>         Siglent SPD4000X – Programmable Linear DC Power Supply https://www.electro-meters.com/product/siglent-spd4000x-programmable-linear-dc-power-supply/ Mon, 08 Jul 2024 15:09:17 +0000 https://www.electro-meters.com/?post_type=product&p=28260
  • Four independent outputs
  • Rated output power: 240W, 285W, 400W
  • 5-digit voltage and current display with a minimum resolution of 1mV and 1mA
  • Clear graphical interface with waveform and timer display modes
  • Supports remote voltage compensation sense function

    • The post Siglent SPD4000X – Programmable Linear DC Power Supply appeared first on Electro-Meters.

    ]]>     The SPD4000X series programmable linear DC power supply features a 4.3-inch TFT-LCD display and a user-friendly interface, coupled with exceptional performance metrics. Engineers benefit from an informative user experience thanks to the real-time waveform display. The series includes three models offering up to four independent outputs with rated voltages of 32V, 12V, or 30V, and total output power capacities of 240W, 285W, or 400W. It boasts a minimum resolution of 1mV/1mA. To ensure device protection, the SPD4000X includes overvoltage and overcurrent protection. These features make the SPD4000X a high-precision, low-noise, and highly reliable power solution suitable for applications ranging from production to research. Additionally, it supports LAN/USB communication interfaces and remote web page control to cater to various application scenarios.

    Key Features

    • Rated Voltage & Output Power: 32V, 12V, 30V; 240W, 285W, 400W
    • Precision Power Supplies: Up to four high-precision power supplies with independently controllable outputs, supporting CH2 and CH3 series and parallel connections
    • User Interface: Clear graphical interface with waveform and timer display modes
    • Display: 5-digit voltage and current display with a minimum resolution of 1mV and 1mA
    • Response Time: Fast output response time of less than 50µs
    • Voltage Compensation: High current channel supports remote voltage compensation sense function with a maximum compensation voltage of 0.6V
    • Protection: Overvoltage and overcurrent protection for safe and accurate operation
    • Display Screen: 4.3-inch TFT-LCD display with 480×272 resolution
    • Communication: USB and LAN standard communication; optional USB-GPIB module
    • Channel Density: Excellent channel density with up to four channels in a 3U half-rack package
    • Data Storage: Internal data storage for setups and parameters
    • Web Server: Embedded web server for instrument communication without software installation
    • Remote Control & Automation: Fully supports SCPI programming command set and includes a LabView driver for remote control and system automation

    The post Siglent SPD4000X – Programmable Linear DC Power Supply appeared first on Electro-Meters.

    ]]>         Siglent SHN900A Portable Vector Network Analyzer https://www.electro-meters.com/product/siglent-shn900a-portable-vector-network-analyzer/ Tue, 28 May 2024 14:11:57 +0000 https://www.electro-meters.com/?post_type=product&p=23637
  • 2 port S-parameters, Time Domain, and Pulse Measurements
  • Standard VNA and cable test mode with optional SA mode
  • Frequency Range: 30 kHz~26.5 GHz
  • Range of IFBW: 10 Hz~3 MHz
  • Dynamic Range: 110 dB (typ.)
  • Handheld instrument with 4 hour battery life and standard bias-Tee
  • Standard GPS, Time and Location Information Saving
  • Enhanced TDR with eye diagram simulation option

    • The post Siglent SHN900A Portable Vector Network Analyzer appeared first on Electro-Meters.

    ]]>     The SHN900A series portable vector network analyzer, with a frequency range up to 26.5GHz, integrates vector network analysis, time domain analysis, spectrum analysis, and standard cable and antenna analysis. It is specifically designed for portable and flexible testing of RF components, cables, and systems in R&D, production, maintenance, communications, antenna base stations, and automotive electronics.

    The SHN900A features a portable, user-friendly design for complex RF measurements. It functions as a cable and antenna tester with built-in DC voltage bias, a full 2-port vector network analyzer with advanced TDR measurements, pulse measurements, pass-fail limit testing, and comprehensive S-parameters. The SHN900A is a highly integrated, multi-mode RF test system suitable for field and production line use, with a 4-hour battery life and a robust mechanical design to handle demanding environments.

    Key Features

    • Frequency Range: 30 kHz~26.5 GHz
    • Frequency resolution: 1 Hz
    • Level resolution: 0.01 dB
    • Range of IFBW: 10 Hz~3 MHz
    • Dynamic Range: 110 dB (typ.)
    • Standard CAT/DTF Measurement
    • Standard Bias-Tee for external measured objects
    • Standard GPS, Time and Location Information Saving
    • Typical working time 4 hours, 3.2 kg net weight, 8.4 lnch Multi-Touch Screen
    • Types of measurement: Scattering-parameter measurement, differential-parameter measurement, receiver measurement, time-domain parameter analysis, limit test, ripple test, impedance conversion, fixture simulation, adapter removal/insertion, enhanced time-domain parameter analysis (TDR), spectrum analysis, frequency offset, scalar mixer measurement, pulse measurement

    The post Siglent SHN900A Portable Vector Network Analyzer appeared first on Electro-Meters.

    ]]>         Siglent SDL1000X/X-E Programmable DC Electronic Load https://www.electro-meters.com/product/siglent-sdl1000x-x-e-programmable-dc-electronic-load/ Thu, 18 Apr 2024 18:12:36 +0000 https://www.electro-meters.com/?post_type=product&p=23475
  • Four static modes and Dynamic mode: CC/CV/CR/CP
  • Minimum readback resolution: 0.1 mV, 0.1 mA
  • Adjustable current rise time range: 0.001 A/us to 2.5 A/us

    • Buy Online

    The post Siglent SDL1000X/X-E Programmable DC Electronic Load appeared first on Electro-Meters.

    ]]>     The SDL1000X/SDL1000X-E series Programmable DC Electronic Loads feature a 3.5-inch TFT-LCD display, ensuring user-friendly operation and exceptional performance. Models such as the SDL1020X/SDL1020X-E support input ranges of 150 V/30 A 200 W, while the SDL1030X/SDL1030X-E accommodate input ranges of 150 V/30 A 300 W. Leading the series, the SDL1000X offers measurement resolutions of 0.1 mV/0.1 mA, whereas the base SDL1000X-E series provides a resolution of 1 mV/1 mA, with adjustable current rise times ranging from 0.001 A/μs to 2.5 A/μs.

    For remote communication and control, the SDL series is equipped with RS232, USB, and LAN interface types. Renowned for their stability across diverse applications, SDL1000X electronic loads are suitable for various testing requirements, including power, battery/handheld device design, industrial applications, LED lighting, automotive electronics, and aerospace.

    The post Siglent SDL1000X/X-E Programmable DC Electronic Load appeared first on Electro-Meters.

    ]]>         Siglent SPS5000X Wide Range Programmable Switching DC Power Supply https://www.electro-meters.com/product/siglent-sps5000x-wide-range-programmable-switching-dc-power-supply/ Thu, 18 Apr 2024 17:49:37 +0000 https://www.electro-meters.com/?post_type=product&p=23473
  • Rated Output Voltage: 40V, 50V, 80V, 160V
  • Rated Output Power: 180W, 360W, 720W, 1080W
  • Wide range of output voltage and current, providing high efficiency power supply
  • Selection between CV and CC priority modes for better protection of equipment under test
  • Load transient recovery time (Load change from 50~100%): <1ms
  • Adjustable slew rate of output voltage and current
  • Setting and readback resolution: 1 mV, 1 mA

    • Buy Online

    The post Siglent SPS5000X Wide Range Programmable Switching DC Power Supply appeared first on Electro-Meters.

    ]]>     The SIGLENT SPS5000X Programmable Switching DC Power Supplies offer a diverse range of output power options through both single-channel and multi-channel configurations, incorporating constant power capability. This series comprises sixteen models within the SPS5000X range, providing voltages up to 160 VDC and power levels up to 1080 W. These power supplies can be connected in series (up to 2 units) or in parallel (up to 3 units), enabling the attainment of voltage ranges from 0 to 320V and current ranges from 0 to 270A, with a maximum combined power output of 3240W.

    The post Siglent SPS5000X Wide Range Programmable Switching DC Power Supply appeared first on Electro-Meters.

    ]]>         Siglent SPD1000X Programmable DC Power Supply https://www.electro-meters.com/product/siglent-spd1000x-programmable-dc-power-supply/ Thu, 18 Apr 2024 17:07:41 +0000 https://www.electro-meters.com/?post_type=product&p=23471
  • Single channel high-precision programmable voltage output:

    • SPD1168X: 16 V / 8 A, total power up to 128 W
    • SPD1305X: 30 V / 5 A, total power up to 150 W
  • Stable, reliable, Low ripple and noise: ≤ 350 uVrms/3 mVpp; < 2 mArms
  • Fast transient response time: < 50 μs
  • 5-digit Voltage, 4-digit Current Display, Minimum Resolution: 1 mV / 1 mA
  • 2.8-inch true color TFT-LCD 240x320 display
  • 2 types of output modes: Two-wire output mode, 4-wire compensation output mode, Max. compensation 1 V

    • Buy Online

    The post Siglent SPD1000X Programmable DC Power Supply appeared first on Electro-Meters.

    ]]>     The Siglent SPD1000X Programmable Linear DC Power Supply boasts a 2.8-inch TFT-LCD display, remote computer control capability, and real-time wave display. Designed for simplicity and high performance, this single-output model packs a punch in a compact form factor. The SPD1168 power supply offers precise programmable output of up to 16 V/8 A, while the SPD1305X version delivers up to 30 V/5 A, featuring a 4-wire sense function for enhanced voltage accuracy, particularly over long leads or high-resistance connections. Both models come equipped with output short and overload protection functions, catering to production and development needs.

    The post Siglent SPD1000X Programmable DC Power Supply appeared first on Electro-Meters.

    ]]>