Sifam Tinsley Distributor in Canada – Electro-Meters https://www.electro-meters.com/manufacturers/sifam-tinsley/ Technology for all your measurement needs Fri, 29 Apr 2022 14:19:48 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 https://www.electro-meters.com/wp-content/uploads/images/electro-meters/cropped-EMlogo_square-32x32.png Sifam Tinsley Distributor in Canada – Electro-Meters https://www.electro-meters.com/manufacturers/sifam-tinsley/ 32 32 Sifam Tinsley Theta 50 – DC Signal Conditioner https://www.electro-meters.com/product/sifam-tinsley-theta-50-dc-signal-conditioner/ Wed, 26 May 2021 14:42:04 +0000 https://www.electro-meters.com/?post_type=product&p=11409
  • I/P 20mA or 10V & O/P 20mA or 10Vdc
  • Isolation between Input, Output & Power Supply:
    • 2.3 kV between I/P & O/P
    • 3.0 kV between Power Supply & I/P or O/P
  • Accuracy:-0.2%
  • Output Burden:- 600Ohms @ 20mAdc
  • Output Burden:- 2kOhms @ 10Vdc
  • On-site selectable DIN rail & wall mounting
  • Universal Power Supply – 85…230Vac/dc
  • LED indicating the power on state

    • The post Sifam Tinsley Theta 50 – DC Signal Conditioner appeared first on Electro-Meters.

    ]]>     Theta 50 is used to electrically isolate input, outputs & power supply.   Looking for a high-quality electrical measuring instruments complies with the international standard, fulfills all requirements & regulations concerning electromagnetic compatibility (EMC) & safety (IEC 61326-1 & IEC 61010-1-2010)

    Applications

    • General applications – to electrically isolate a single input, output & power supply, providing 2 isolated outputs
    • Manufacturing and OEM Applications

    The post Sifam Tinsley Theta 50 – DC Signal Conditioner appeared first on Electro-Meters.

    ]]>         Sifam Tinsley Theta 30P – Electrical Transducers https://www.electro-meters.com/product/sifam-tinsley-theta-30p-electrical-transducers/ Wed, 26 May 2021 14:15:27 +0000 https://www.electro-meters.com/?post_type=product&p=11407
  • Available in Single or Dual output type
  • On-site selectable output type (DC current / DC voltage)
  • Accuracy class 0.2 (IEC/ EN 60 688)
  • Seven Segment LCD Display
  • RS-485(Modbus) Communication

    • The post Sifam Tinsley Theta 30P – Electrical Transducers appeared first on Electro-Meters.

    ]]>     Theta 30P is a compact, multi-function panel mount power quality monitor, which measures, calculates and displays major electrical parameters of three phase power system. The Theta 30P programmable transducer series measure and convert active, reactive and apparent power of a single-phase or three-phase AC system with balanced or unbalanced loads. The output signal is proportional to the measured value of the active or reactive power and is either load-independent DC Voltage or DC Current output signal. The Theta 30P transducer is field programmable and/or data can be retrieved via optional 7 segment LCD display with backlit keypad or connecting a PC with RS232 interface and PRKAB601 adapter connected to the Theta 30P’s front panel programming connector, or simply networked via the RS485 port.

    Applications

    • Generation and Industrial applications – measuring power quantities and providing a proportional (real-time) analog signal
    • Power/Energy & Load monitoring
    • OEM Applications

    The post Sifam Tinsley Theta 30P – Electrical Transducers appeared first on Electro-Meters.

    ]]>         Sifam Tinsley Theta 20A & 20V – Electrical Transducers https://www.electro-meters.com/product/sifam-tinsley-theta-20a-20v-electrical-transducers/ Wed, 26 May 2021 14:01:28 +0000 https://www.electro-meters.com/?post_type=product&p=11405
  • Available in Single or Dual output type
  • On-site selectable output type (DC current / DC voltage)
  • Accuracy class 0.2 (IEC/ EN 60 688)
  • Seven Segment LCD Display
  • RS-485(Modbus) Communication

    • The post Sifam Tinsley Theta 20A & 20V – Electrical Transducers appeared first on Electro-Meters.

    ]]>     Theta 20A/20V is used to measure and convert AC Voltage or Current input into a load independent DC current or voltage output signal. The DC process signals can be used for direct input into monitoring systems such as recorders, data acquisition systems, panel monitoring instruments etc. The Theta 20A/20V transducers process True RMS signals, providing accurate readings for signals that contain harmonic distortion. The input signal is converted into a load independent signal and the output signal generated is proportional to the mean root square value of the input current value.

    Applications

    • Generation and Industrial applications – measuring power quantities and providing a proportional (real-time) analog signal
    • Manufacturing and OEM Application

    The post Sifam Tinsley Theta 20A & 20V – Electrical Transducers appeared first on Electro-Meters.

    ]]>         Sifam Tinsley Alpha 30 – Multifunction Power Meter https://www.electro-meters.com/product/sifam-tinsley-alpha-30-multifunction-power-meter/ Wed, 26 May 2021 13:04:54 +0000 https://www.electro-meters.com/?post_type=product&p=11403
  • Measures important electrical parameters in 3 phase 4 Wire and 3 phase 3 Wire Networks
  • MODBUS (RS-485) Communication (optional)
  • Pulse/Limit Switch output (optional)
  • 3 Line 4 Digits ultra bright LED Display (up to 9999)
  • On-site Programmable CT/PT Ratios
  • User selectable CT Secondary 1A/5A
  • Measurement & Display of RPM, Run hours, On hours, No. of interruption

    • The post Sifam Tinsley Alpha 30 – Multifunction Power Meter appeared first on Electro-Meters.

    ]]>     The Alpha 30 is versatile cost-effective solution for single and 3 phase networks. The Alpha 30 not only replaces multiple meters, it’s 96x96mm square cutout and a low back profile make it easy to integrate into your panel, especially if you are short on space. Once installed the Alpha 30 can be configured on-site or remotely via MODBUS (RS485) for maximum flexibility. The Alpha 30 is specifically designed to monitor and control power distribution systems by measuring more than 61 electrical parameters, storing max. and min. current and voltage values every 40 seconds, importing and exporting energy measurements of Active energy (kWh), Reactive energy (kVArh), Apparent energy (kVAh) and Ampere Hour (kAh) values and the ability to trip 2 relays if the measured values exceed the programmed High & Low Limits.

    Applications

    • Monitoring and controlling power distribution systems
    • Monitoring Power and Energy systems
    • Limit protection

    The post Sifam Tinsley Alpha 30 – Multifunction Power Meter appeared first on Electro-Meters.

    ]]>         Sifam Tinsley Alpha 20 – Multifunction Power Meter https://www.electro-meters.com/product/sifam-tinsley-alpha-20-multifunction-power-meter/ Tue, 25 May 2021 19:48:39 +0000 https://www.electro-meters.com/?post_type=product&p=11400
  • Measures important electrical parameters in 3 phase 4 Wire and 3 phase 3 Wire Networks
  • True RMS measurement – measures distorted waveform up to 15th harmonic
  • Limit Switch control (optional)
  • 3 Line 4 Digits ultra bright LED Display (up to 9999)
  • On site Programmable CT/PT Ratios
  • User selectable CT Secondary 1A/5A
  • User selectable PT Secondary from 100 VLL to 500 VLL
  • Storage of MIN / MAX values

    • The post Sifam Tinsley Alpha 20 – Multifunction Power Meter appeared first on Electro-Meters.

    ]]>     Alpha 20 is a three-phase multi-function power and energy meter for monitoring power and energy management systems. This cost-effective meter provides extra value by replacing multiple panel meters, ideal for panels where space is at a premium. The Alpha 20 is on-site programmable, the primary CT and PT ratios as well as the secondary can be adjusted via front panel key or remotely. The Delta Power is available with an optional limit switch (relay) and will trip if the programmed parameters are exceeded. Max. and Min values for System Voltage, System Current, Run Hour, ON Hour & number of interrupts can be stored and are updated every 60 second for review of alarm situations.

    Applications

    • Generator Applications
    • Monitoring Power and Energy systems
    • Limit protection

    The post Sifam Tinsley Alpha 20 – Multifunction Power Meter appeared first on Electro-Meters.

    ]]>         Sifam Tinsley Sigma Series DGL – Analog Panel Meters https://www.electro-meters.com/product/sifam-tinsley-sigma-series-dgl-analog-panel-meters/ Tue, 25 May 2021 19:29:04 +0000 https://www.electro-meters.com/?post_type=product&p=11395
  • 240° Moving Coil Rectifier
  • AC Meter
  • Available in 48×48, 72×72, 96×96 and 144x144mm
  • Scale interchangeability
  • Near linear scale
  • Glass filled polycarbonate housing (UL 94 V-0)
  • Knife edge pointer
  • Easily replaceable glass and bezel

    • The post Sifam Tinsley Sigma Series DGL – Analog Panel Meters appeared first on Electro-Meters.

    ]]>     The Sigma Series DGL series measures DC current or voltage, suitable for all DC systems. Scales are linear and customized to customer’s needs and specifications. For special high accuracy meters to better than 1 %, scales are hand marked and critically calibrated to achieve the desired accuracy. High currents are measured with separate shunts and suitably scaled indicators. Suppressed, center and offset zero models are available. Meter movement is spring-loaded and suspended between sapphire jewels with hardened steel pivots. The movement is critically shielded and dampened with silicon oil for smooth deflection without pointer vibration.

    Scales are easily interchangeable for maximum scaling flexibility. The scale display area allows for the use of large, easy to read numerals and divisions. The Sigma Series DGL comply with DIN EN60051 (IEC51) requirements , with a standard accuracy of ±1.5% of full scale or better. The Sigma Series DGL is available as 48, 72, 96 and 144 mm sizes and is manufactured from self-extinguishing, polycarbonate.

    Applications

    • Military, Marine, Railroad and off road applications
    • Ideal for adverse (dusty) environments or severe applications, meets UL-1437 or IEC 144 or IP54
    • Rugged, High Shock Movement ideal for rough environments

    The post Sifam Tinsley Sigma Series DGL – Analog Panel Meters appeared first on Electro-Meters.

    ]]>         Sifam Tinsley Sigma Series DSL – Analog Panel Meters https://www.electro-meters.com/product/sifam-tinsley-sigma-series-dsl-analog-panel-meters/ Tue, 25 May 2021 18:37:19 +0000 https://www.electro-meters.com/?post_type=product&p=11393
  • 240° Moving Coil
  • DC Meter
  • Available in 48×48, 72×72, 96×96 and 144x144mm
  • Scale interchangeability
  • Near linear scale
  • Glass filled polycarbonate housing (UL 94 V-0)
  • Knife edge pointer
  • Easily replaceable glass and bezel

    • The post Sifam Tinsley Sigma Series DSL – Analog Panel Meters appeared first on Electro-Meters.

    ]]>     The Sigma Series DSL measures DC current or voltage, suitable for all DC systems. Scales are linear and customized to customer’s needs and specifications. For special high accuracy meters to better than 1 %, scales are hand marked and critically calibrated to achieve the desired accuracy. High currents are measured with separate shunts and suitably scaled indicators. Suppressed, center and offset zero models are available. Meter movement is spring-loaded and suspended between sapphire jewels with hardened steel pivots. The movement is critically shielded and dampened with silicon oil for smooth deflection without pointer vibration.

    Scales are easily interchangeable for maximum scaling flexibility. The scale display area allows for the use of large, easy to read numerals and divisions. The Sigma Series DSL comply with DIN EN60051 (IEC51) requirements , with a standard accuracy of ±1.5% of full scale or better. The Sigma Series DSL is available as 48, 72, 96 and 144 mm sizes and is manufactured from self-extinguishing, polycarbonate.

    Applications

    • Military, Marine, Railroad and off road applications
    • Ideal for adverse (dusty) environments or severe applications, meets UL-1437 or IEC 144 or IP54
    • Rugged, High Shock Movement ideal for rough environments

    The post Sifam Tinsley Sigma Series DSL – Analog Panel Meters appeared first on Electro-Meters.

    ]]>         Sifam Tinsley Sigma Series DS – Analog Panel Meters https://www.electro-meters.com/product/sifam-tinsley-sigma-series-ds-analog-panel-meters/ Tue, 25 May 2021 18:20:26 +0000 https://www.electro-meters.com/?post_type=product&p=11391
  • 90° Moving Coil
  • DC Meter
  • Available in 48×48, 72×72, 96×96 and 144x144mm
  • Scale interchangeability
  • Near linear scale
  • Glass filled polycarbonate housing (UL 94 V-0)
  • Knife edge pointer
  • Easily replaceable glass and bezel

    • The post Sifam Tinsley Sigma Series DS – Analog Panel Meters appeared first on Electro-Meters.

    ]]>     The Sigma Series DS series measures DC current or voltage, suitable for all DC systems. Scales are linear and customized to customer needs and specifications. For special high accuracy meters to better than 1 %, scales are hand marked and critically calibrated to achieve the desired accuracy. High currents are measured with separate shunts and suitably scaled indicators. Suppressed, center and offset zero models are available. Meter movement is spring-loaded and suspended between sapphire jewels with hardened steel pivots. The movement is critically shielded and dampened with silicon oil for smooth deflection without pointer vibration.

    Scales are easily interchangeable for maximum scaling flexibility. The scale display area allows for the use of large, easy to read numerals and divisions. The Sigma Series DS comply with DIN EN60051 (IEC51) requirements, with a standard accuracy of ±1.5% of full scale or better. The Sigma Series DS is available as 48, 72, 96 and 144 mm sizes and is manufactured from self-extinguishing polycarbonate.

    Applications

    • Military, Marine, Railroad and off road applications
    • Ideal for adverse (dusty) environments or severe applications, meets UL-1437 or IEC 144 or IP54
    • Rugged, High Shock Movement ideal for rough environments

    The post Sifam Tinsley Sigma Series DS – Analog Panel Meters appeared first on Electro-Meters.

    ]]>         Sifam Tinsley Sigma Series DE – Analog Panel Meters https://www.electro-meters.com/product/sifam-tinsley-sigma-series-de-analog-panel-meters/ Tue, 25 May 2021 18:15:48 +0000 https://www.electro-meters.com/?post_type=product&p=11389
  • 90° Moving Iron
  • AC Meter
  • Available in 48×48, 72×72, 96×96 and 144x144mm
  • Scale interchangeability
  • Near linear scale
  • Glass filled polycarbonate housing (UL 94 V-0)
  • Knife edge pointer
  • Easily replaceable glass and bezel

    • The post Sifam Tinsley Sigma Series DE – Analog Panel Meters appeared first on Electro-Meters.

    ]]>     The Sigma Series DE is designed for applications that require reliable true RMS readings independent of waveform or harmonics. Sifam Tinsely’s patent iron vane movements come with sapphire jewels and hardened steel pivots, providing reliable readings, even in less than favorable environments that are susceptible to vibration or shock. Sifam Tinsley movements also offer outstanding meter performance, providing exceptional accuracy, tracking and repeatability.

    Scales are easily interchangeable for maximum scaling flexibility. The scale display area allows for the use of large, easy to read numerals and divisions. The Sigma Series DE comply with DIN EN60051 (IEC51) requirements, with a standard accuracy of ±1.5% of full scale or better. The Sigma Series DE is available as 48, 72, 96 and 144 mm sizes and is manufactured from self-extinguishing polycarbonate.

    Applications

    • Military, Marine, Railroad and off road applications
    • Ideal for adverse (dusty) environments or severe applications, meets UL-1437 or IEC 144 or IP54
    • Rugged, High Shock Movement ideal for rough environments

    The post Sifam Tinsley Sigma Series DE – Analog Panel Meters appeared first on Electro-Meters.

    ]]>