NEO Messtechnik Distributor in Canada – Electro-Meters https://www.electro-meters.com/manufacturers/neo-messtechnik/ Technology for all your measurement needs Mon, 09 Jun 2025 14:57:54 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 https://www.electro-meters.com/wp-content/uploads/images/electro-meters/cropped-EMlogo_square-32x32.png NEO Messtechnik Distributor in Canada – Electro-Meters https://www.electro-meters.com/manufacturers/neo-messtechnik/ 32 32 NEO Messtechnik PV Master – Solar Photovoltaic Inspection https://www.electro-meters.com/product/neo-messtechnik-pv-master-solar-photovoltaic-inspection/ Fri, 05 Aug 2022 15:13:29 +0000 https://www.electro-meters.com/?post_type=product&p=21191 The NEO PV Master products ensure quick and reliable inspection and evaluation of solar plants including a fully-automatic AI based system diagnostic. Up to 24 input channels with a rating of up to 1600V DC together with the smart IV-curve diagnostic function allows simultaneous evaluation of multiple PV strings and complete PV arrays.

The post NEO Messtechnik PV Master – Solar Photovoltaic Inspection appeared first on Electro-Meters.

]]> The number of solar power plants has been steadily increasing over the past years. Photovoltaic systems are known for: Long Lifetime, Low aging effects, Low maintenance, Low operating costs, Easy Installation and Robustness.

Nevertheless, different kind of faults in PV systems can occur which lead to:

  • Performance losses of >10 % within 3 years are very common
  • Most faults are not detectable by visual inspection
  • Mismatch losses of PV strings are 10 to 100 times higher than defect panels

The PV Master is able to automatically detect faults such as:

  • Mismatch Losses
  • Hotspots
  • PID (Potential induced degradation)
  • Bypass diode defect
  • Cell Crack
  • Soiling & Glass breakage
  • Delamination & Discoloration

Hardware

  • Up to 24 channels for simultaneous measurement of up to 20 strings
  • 10.1 inch full-HD Smart Touch display
  • Up to 4 hours of operation
  • Up to 1600V / 40A designed for high-power applications (high voltage, high current)
  • IEC 62446
  • Interfaces: USB 3.0, TCP/IP, LAN, Wifi, Bluetooth, RS232, Modbus, 104, DIO, and CAN

The post NEO Messtechnik PV Master – Solar Photovoltaic Inspection appeared first on Electro-Meters.

]]> NEO Messtechnik PQM SCADA – Power Quality Management Software https://www.electro-meters.com/product/neo-messtechnik-pqm-scada-power-quality-management-software/ Tue, 02 Nov 2021 15:25:31 +0000 https://www.electro-meters.com/?post_type=product&p=19562 PQM-SCADA is the enterprise management software for Power Quality Analyzers and Disturbance Recorders. It is an easy-to-use software solution that allows the user to visualize live-data, historical data or reports. The multi-screen capability gives the user the ability to design their own visualization screens including the use of multiple monitors.

User-management with different access and security levels is integrated, including the option for your customers to view limited data.

The post NEO Messtechnik PQM SCADA – Power Quality Management Software appeared first on Electro-Meters.

]]> Overview

This PQM-SCADA enterprise is an easy-to-use software solution which allows the user to visualize live-data, historical
data or reports. The multi-screen capability gives the user the ability to design their own visualization screens including
the use of multiple monitors. User-management with different access and security levels is integrated, including the option for your customers to view limited data.

Features

  • Real Time & Historical Data
  • Multiple Visualizations
  • Automatic Report Generation (EN50160)
  • Notifications, Alarm, Email, SMS
  • Remote Meter Configuration
  • User Management tool

The post NEO Messtechnik PQM SCADA – Power Quality Management Software appeared first on Electro-Meters.

]]> NEO Messtechnik PQM 200 – Power Quality Monitor https://www.electro-meters.com/product/neo-messtechnik-pqm-200-power-quality-monitor/ Mon, 01 Nov 2021 19:10:49 +0000 https://www.electro-meters.com/?post_type=product&p=19560 The PQM-200 is a computer-based Power Quality Monitor with up to 48 input channels. It combines functionalities of a Power Quality Monitor, Disturbance Recorder, Power Fault Recorder, Transient Recorder, Phasor Measurement Unit (PMU) and high precision energy meter. The input modules are fully-isolated (isolation voltage 6kV) and provide a synchronized sampling rate of 144 kS/s per channel and 24-bit resolution. An Automatic Anti-Aliasing filter together with extremely low-noise ensures signal quality and signal processing.

The post NEO Messtechnik PQM 200 – Power Quality Monitor appeared first on Electro-Meters.

]]> Features
  • Accuracy: 0.05%
  • Sampling Rate: 124kS/s
  • Resolution: 24bit
  • Safety Category: CAT IV 600V
  • Modular System up to 40 ch
  • Desktop or Rack Mount

The post NEO Messtechnik PQM 200 – Power Quality Monitor appeared first on Electro-Meters.

]]> NEO Messtechnik PQM 100 – Power Quality Monitor https://www.electro-meters.com/product/neo-messtechnik-pqm-100-power-quality-monitor/ Mon, 01 Nov 2021 19:06:22 +0000 https://www.electro-meters.com/?post_type=product&p=19551 PQM-100 is based on a modular architecture, allowing combinations of one CPU module and up to 6 selected input modules into one device. The input modules are providing input signal isolation, filtering and A/D conversion. The CPU module is equipped with FPGA real-time controller for the calculation of all parameters and to provide all interfaces and data storage.

The post NEO Messtechnik PQM 100 – Power Quality Monitor appeared first on Electro-Meters.

]]> Modular Architecture as its best. The PQM-100 allows the combination of one CPU module and up to 6 selected input modules into one device. The input modules provide input signal isolation, filtering and A/D conversion. The CPU module is equipped with a FPGA real-time controller for the calculation of all parameters and to provide all interfaces and data storage.

Features

  • Accuracy: 0.1%
  • Sampling Rate: 16kS/s or 32kS/s
  • Resolution: 24bit
  • Safety Category: CAT IV 300V
  • Modular System up to 64 ch

The post NEO Messtechnik PQM 100 – Power Quality Monitor appeared first on Electro-Meters.

]]> NEO Messtechnik PQA 8000 – Mobile Power Quality Analyzer https://www.electro-meters.com/product/neo-messtechnik-pqa-8000-mobile-power-quality-analyzer/ Wed, 27 Oct 2021 17:44:21 +0000 https://www.electro-meters.com/?post_type=product&p=19506 The NEO PQA8000 reflects our understanding of power grid applications of today – the most complete and reliable mobile Analyzer you will find on the market. Multi-Touch, 4 hours mobile operation and complying with Power Quality Standards and Grid Codes your measurement application requires. Class A Power Quality Analyzer for measurements and analyses way beyond EN50160.

The only instruments in the world measuring Supraharmonic currents and voltages up to 500 kHz.
[html_block id="23640"]

The post NEO Messtechnik PQA 8000 – Mobile Power Quality Analyzer appeared first on Electro-Meters.

]]> Hardware
  • 11 inch full-HD Smart Touch display
  • Up to 4 hours of operation.
  • Sensor Supply for current clamps and sensors (uni- and bipolar)
  • GPS for highly-precise time synchronization
  • Large SSD, up to 1 TB data storage
  • Interfaces: USB 3.0, TCP/IP, LAN, Wifi, Bluetooth, RS232, Modbus, 104, DIO, and CAN.

Features

  • Supraharmonics up to 500 kHz
  • High Accuracy: 0.05%
  • High Sampling Rate: 124kS/s or 1MS/s
  • High Resolution: 18bit / 24bit
  • High Safety: CAT IV 600V
  • Power Quality: Class A
  • High Dynamic: 0.5mA to 150kA
  • High Performance: PC with Multi-Touch and battery pack
  • High Connectivity: additional input signals, Interfaces, AC&DC power, etc.
  • Visualizations: Recorder, Waveform, FFT, Vector, Table, etc.
  • System Dynamics: Resonances, Phase Angle Jumps, etc.
  • Transient Recording: Waveform & Disturbance Trigger
  • Disturbance: 1/2 Period storing & triggering
  • Phasor Measurement Unit(PMU) and RoCoF
  • Standards and Certifications: IEC61010-1 (2011) / IEC61010-2-030 / IEC 61000-4-3 / IEC 61000-4-4 / LVD Directive 2014 / EMC Directive 2014/ Rohs Directive 2015/ EN 61000-3-2 / EN 61000-3-3 / EN 61326-1 / EN 55011 +A1, Class A

The post NEO Messtechnik PQA 8000 – Mobile Power Quality Analyzer appeared first on Electro-Meters.

]]> NEO Messtechnik PQA 7000 – Mobile Power Quality Analyzer https://www.electro-meters.com/product/neo-messtechnik-pqa-7000-mobile-power-quality-analyzer/ Wed, 20 Oct 2021 18:04:01 +0000 https://www.electro-meters.com/?post_type=product&p=19514 The NEO PQA7000 is the complete package mobile power quality analyzer. Featuring Multi-Touch, 6 hours mobile operation and complying with Power Quality Standards and Grid Codes your measurement application requires. Class A Power Quality Analyzer for measurements and analyses way beyond EN50160.

The post NEO Messtechnik PQA 7000 – Mobile Power Quality Analyzer appeared first on Electro-Meters.

]]> Hardware
  • 7 inch multi-touch display – or completely without display
  • Up to 6 hours of operation
  • Sensor Supply for current clamps and sensors (uni- and bipolar)
  • GPS for highly-precise time synchronization
  • Up to 256GB data storage
  • Interfaces: USB 3.0, TCP/IP, LAN, Wifi, Bluetooth, RS232, Modbus, 104, DIO, and CAN.

Features

  • High Accuracy: 0.05%
  • High Sampling Rate: 48kS/s
  • High Resolution: 24bit
  • Voltage Range: 1600V / 800V
  • High Safety: CAT IV 600V
  • Power Quality: Class A
  • Bandwidth: 20 kHz
  • High Dynamic: 0.5mA to 150kA
  • High Performance: PC with Multi-Touch and battery pack
  • High Connectivity: additional input signals, Interfaces, AC&DC power, etc.
  • Visualizations: Recorder, Waveform, FFT, Vector, Table, etc.
  • System Dynamics: Resonances, Phase Angle Jumps, etc.
  • Transient Recording: Waveform & Disturbance Trigger
  • Disturbance: 1/2 Period storing & triggering
  • Phasor Measurement Unit(PMU) and RoCoF
  • Standard and Certifications: IEC61010-1 (2011) / IEC61010-2-030 / IEC 61000-4-3 / IEC 61000-4-4 / LVD Directive 2014 / EMC Directive 2014/ Rohs Directive 2015/ EN 61000-3-2 / EN 61000-3-3 / EN 61326-1 / EN 55011 +A1, Class A

The post NEO Messtechnik PQA 7000 – Mobile Power Quality Analyzer appeared first on Electro-Meters.

]]>