General Electric / ITI Distributor in Canada – Electro-Meters https://www.electro-meters.com/manufacturers/general-electric-iti/ Technology for all your measurement needs Tue, 11 Nov 2025 15:37:30 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 https://www.electro-meters.com/wp-content/uploads/images/electro-meters/cropped-EMlogo_square-32x32.png General Electric / ITI Distributor in Canada – Electro-Meters https://www.electro-meters.com/manufacturers/general-electric-iti/ 32 32 GE / ITI PCL Series – AC Current Transducer https://www.electro-meters.com/product/ge-iti-pcl-series-ac-current-transducer/ Tue, 27 Jun 2023 14:27:49 +0000 https://www.electro-meters.com/?post_type=product&p=22256 Notice: This product has been discontinued.
Recommended alternate: Veris Hawkeye H921 Current Transducer
  • Input: Up to 75 AAC
  • Output: 4-20 mADC
  • Frequency: 50-60 Hz
  • Insulation Level: 600 V, 10 kV BIL full wave

The post GE / ITI PCL Series – AC Current Transducer appeared first on Electro-Meters.

]]> The PCL transducers excel in converting a sinusoidal AC input current into a corresponding DC output current with great precision. The integrated circuit amplifiers integrated into these transducers ensure a consistent output current, regardless of changes in the load impedance. This versatility enables the PCL to be seamlessly employed in various applications such as remote instrumentation, motor control, and energy management systems. Moreover, the output signal (ranging from 4 to 20mA DC) can be transmitted over extensive distances without compromising its accuracy.

The post GE / ITI PCL Series – AC Current Transducer appeared first on Electro-Meters.

]]> GE / ITI PCM Series – AC Current Transducer https://www.electro-meters.com/product/ge-iti-pcm-series-ac-current-transducer/ Mon, 26 Jun 2023 18:29:45 +0000 https://www.electro-meters.com/?post_type=product&p=22247 Notice: This product has been discontinued.
Recommended alternate: Veris Hawkeye H221 Current Transducer
  • Input: Up to 300 AAC
  • Output: 4-20 mADC
  • Frequency: 50-400 Hz
  • Insulation Level: 600 V, 10 kV BIL full wave

The post GE / ITI PCM Series – AC Current Transducer appeared first on Electro-Meters.

]]> The PCM transducer accurately converts a sinusoidal ac input to a proportional dc current. The high performance integrated circuit amplifiers achieve a contestant current output, insensitive to a variable impedance load. This allows the PCM to be easily applied to remote instrumentation, motor control, and energy management installations.

The post GE / ITI PCM Series – AC Current Transducer appeared first on Electro-Meters.

]]> GE / ITI PT6 Series – Indoor Medium Voltage Transformers https://www.electro-meters.com/product/ge-iti-pt6-series-indoor-medium-voltage-transformers/ Thu, 05 May 2022 19:26:53 +0000 https://www.electro-meters.com/?post_type=product&p=20850
  • Frequency: 60 Hz
  • Maximum System Voltage: 25.5 kV, BIL 125 kV
  • Thermal Rating: 1500 VA at 30C/1000 VA at 55C
  • Accuracy Class: 0.3 WXMY,1.2 Z at 100 % rated voltage with 120 V based ANSI burden.
    0.3 WXMY, 1.2 MY at 58 % rated voltage with 69.3 V based ANSI burden.

    • The post GE / ITI PT6 Series – Indoor Medium Voltage Transformers appeared first on Electro-Meters.

    ]]>     GE/ITI offers a wide variety of medium voltage transformers. These VTs are typically installed in medium voltage switchgear.

    Features

    • BIL up to 200kV
    • Vacuum cast using polyurethane resin
    • Designed to meet C57.13
    • UL Recognized & CSA Approved
    • Some models IC Approved

    The post GE / ITI PT6 Series – Indoor Medium Voltage Transformers appeared first on Electro-Meters.

    ]]>         GE / ITI PTG5 & PTW5 Series – Indoor Medium Voltage Transformers https://www.electro-meters.com/product/ge-iti-ptg5-ptw5-series-indoor-medium-voltage-transformers/ Thu, 05 May 2022 19:22:11 +0000 https://www.electro-meters.com/?post_type=product&p=20848
  • Frequency: 60 Hz
  • Maximum System Voltage: 15.5 kV, BIL 110 kV
  • Thermal Rating: 1500 VA at 30C/1000 VA at 55C
  • Accuracy Class: 0.3 WXMY,1.2 Z at 100 % rated voltage with 120 V based ANSI burden.
    0.3 WXMY, 1.2 MY at 58 % rated voltage with 69.3 V based ANSI burden.

    • The post GE / ITI PTG5 & PTW5 Series – Indoor Medium Voltage Transformers appeared first on Electro-Meters.

    ]]>     GE/ITI offers a wide variety of medium voltage transformers. These VTs are typically installed in medium voltage switchgear.

    Features

    • BIL up to 200kV
    • Vacuum cast using polyurethane resin
    • Designed to meet C57.13
    • UL Recognized & CSA Approved
    • Some models IC Approved
    • PTG for GE mounting style; PTW for Westinghouse mounting style

    The post GE / ITI PTG5 & PTW5 Series – Indoor Medium Voltage Transformers appeared first on Electro-Meters.

    ]]>         GE / ITI PTG4 & PTW4 Series – Indoor Medium Voltage Transformers https://www.electro-meters.com/product/ge-iti-ptg4-ptw4-series-indoor-medium-voltage-transformers/ Thu, 05 May 2022 19:08:19 +0000 https://www.electro-meters.com/?post_type=product&p=20846
  • Frequency: 60 Hz
  • Maximum System Voltage: 9.52 kV, BIL 75 kV
  • Thermal Rating: 1500 VA at 30C/1000 VA at 55C
  • Accuracy Class: 0.3 WXMY,1.2 Z at 100 % rated voltage with 120 V based ANSI burden.
    0.3 WXMY, 1.2 MY at 58 % rated voltage with 69.3 V based ANSI burden.

    • The post GE / ITI PTG4 & PTW4 Series – Indoor Medium Voltage Transformers appeared first on Electro-Meters.

    ]]>     GE/ITI offers a wide variety of medium voltage transformers. These VTs are typically installed in medium voltage switchgear.

    Features

    • BIL up to 200kV
    • Vacuum cast using polyurethane resin
    • Designed to meet C57.13
    • UL Recognized & CSA Approved
    • Some models IC Approved
    • PTG for GE mounting style; PTW for Westinghouse mounting style

    The post GE / ITI PTG4 & PTW4 Series – Indoor Medium Voltage Transformers appeared first on Electro-Meters.

    ]]>         GE / ITI PTG3 & PTW3 Series – Indoor Medium Voltage Transformers https://www.electro-meters.com/product/ge-iti-ptg3-ptw3-series-indoor-medium-voltage-transformers/ Wed, 04 May 2022 17:38:52 +0000 https://www.electro-meters.com/?post_type=product&p=20828
  • Frequency: 60 Hz
  • Maximum System Voltage: 5.6 kV, BIL 60 kV
  • Thermal Rating: 750 VA at 30C/500 VA at 55C
  • Accuracy Class: 0.3 WXMY,1.2 Z at 100 % rated voltage with 120 V based ANSI burden.
    0.6 WX, 1.2 MY at 58 % rated voltage with 69.3 V based ANSI burden.

    • The post GE / ITI PTG3 & PTW3 Series – Indoor Medium Voltage Transformers appeared first on Electro-Meters.

    ]]>     GE/ITI offers a wide variety of medium voltage transformers. These VTs are typically installed in medium voltage switchgear.

    Features

    • BIL up to 200kV
    • Vacuum cast using polyurethane resin
    • Designed to meet C57.13
    • UL Recognized & CSA Approved
    • Some models IC Approved
    • PTG for GE mounting style; PTW for Westinghouse mounting style

    The post GE / ITI PTG3 & PTW3 Series – Indoor Medium Voltage Transformers appeared first on Electro-Meters.

    ]]>         GE / ITI Model 401, 402, 403, 404, 405 – Low Voltage Control Power Transformers https://www.electro-meters.com/product/ge-iti-model-401-402-403-404-405-low-voltage-control-power-transformers/ Thu, 19 Aug 2021 19:54:15 +0000 https://www.electro-meters.com/?post_type=product&p=18245
  • Thermal Rating: 1-5 kVA/40°C
  • Frequency: 60 Hz
  • Secondary Voltage: 240 Volts with center tap
  • Insulation Level: 0.6 kV, Class H (180°C)

    • The post GE / ITI Model 401, 402, 403, 404, 405 – Low Voltage Control Power Transformers appeared first on Electro-Meters.

    ]]>     ITI’s wide range of control power transformers are designed to provide control power in voltage switchgear.

    Features

    • UL recognized – file E161807
    • Terminals are 10-32 plain brass, pan head screws
    • Mounting bolts (4) are 1/4-20, zinc plated
    • Test certificates and certified test reports available

    Application

    • Control power transformer for line to line primary connection with dual secondary operation-240/120 volts-see connection diagram.

    The post GE / ITI Model 401, 402, 403, 404, 405 – Low Voltage Control Power Transformers appeared first on Electro-Meters.

    ]]>         GE / ITI 3VT471 Series – 3-Phase Voltage Transformers https://www.electro-meters.com/product/ge-iti-3vt471-series-3-phase-voltage-transformers/ Thu, 19 Aug 2021 19:04:13 +0000 https://www.electro-meters.com/?post_type=product&p=18241
  • Frequency: 60 Hz
  • Standard Secondary Voltage: 120 V
  • Insulation Level: 600 V, BIL 10 kV
  • Thermal Rating: 40 VA at 30C/27 VA at 55C
  • Accuracy Class: ±1% @ 5 VA

    • The post GE / ITI 3VT471 Series – 3-Phase Voltage Transformers appeared first on Electro-Meters.

    ]]>     GE/ITI offers a wide variety of 600 volt class indoor voltage transformers for metering. These VTs feature high accuracy and burden capacity for metering applications.

    Features

    • UL recognized – file number E93779
    • CSA approved – file number LR89403
    • Meet requirements of IEEE C57.13
    • IEC-44-1 Rated
    • Available with Primary and Secondary fuses
    • High accuracy and burden capability
    • Convenient mounting and wiring
    • Test certificates and certified test reports available

    The post GE / ITI 3VT471 Series – 3-Phase Voltage Transformers appeared first on Electro-Meters.

    ]]>         GE / ITI RT Series – Rack Mount Test Switches https://www.electro-meters.com/product/ge-iti-rt-series-rack-mount-test-switches/ Mon, 12 Apr 2021 16:20:30 +0000 https://www.electro-meters.com/?post_type=product&p=9916 RT switch assemblies for rack and switchboard mounting permit convenient isolation of switchboard relays, meters and instruments. RT racks allow quick and easy multi-circuit testing by conventional test methods.

    The post GE / ITI RT Series – Rack Mount Test Switches appeared first on Electro-Meters.

    ]]>     Features

    • UL and cUL recognized – UL File E101598
    • RT Switches accommodate three FT switches mounted on a 19” wide steel mounting panel (Brushed aluminum available)
    • Provides up to 30 terminals with three FT combinations
    • Color and finish can be customized
    • Optional rack heights for label applications
    • Each panel is supplied with the hardware to mount the RT assembly to the 19” rack enclosure
    • The RT assembly will support an FT style test plug
    • Full-length clear cover is standard. Full length black cover, individual clear covers, and individual black covers are available

    Application

    • RT Switch assemblies for rack and switchboard mounting permit convenient isolation of switchboard relays, meters and instruments. RT racks allow quick and easy multi-circuit testing by conventional test methods and for faster installation into switchgear.

    The post GE / ITI RT Series – Rack Mount Test Switches appeared first on Electro-Meters.

    ]]>         GE / ITI FT Series – Test Switches https://www.electro-meters.com/product/ge-iti-ft-series-test-switches/ Mon, 12 Apr 2021 16:01:17 +0000 https://www.electro-meters.com/?post_type=product&p=9914 The FT Switches and FT Test Plugs have all the features necessary for applications involving the measurement of individual currents and voltages to facilitate testing of substation instrumentation and protection devices from the front of the panel. The make before-break current short circuit feature allows test personnel the convenience of isolating equipment from current transformer circuits.

    The post GE / ITI FT Series – Test Switches appeared first on Electro-Meters.

    ]]>     Features

    • UL and cUL recognized – UL File E101598
    • Built with a maximum of ten individual poles, of potential, current, and current shorting switch units
    • Switches can be assembled in a variety of different arrangements to match customer requirements
    •  FT Test plugs are used in conjunction with the FT Switches to enable easy measurement, calibration, verification or maintenance of relays, meters and instruments

    Application

    • The FT Test Switches and Test Plugs provide a safe, simple, immediate and reliable method to isolate equipment and measure system current and voltage during field testing and commissioning.

    The post GE / ITI FT Series – Test Switches appeared first on Electro-Meters.

    ]]>