Dylix Distributor in Canada – Electro-Meters

Dylix STD Series – Submersible Pressure Transmitters

Tyler — Tue, 16 Feb 2021 16:23:43 +0000

Designed for low cost of ownership Dylix’s STD Series Submersible Pressure Transmitter is designed for low cost of ownership for small bore level /depth measurement applications in shallow or deep wells. Key features of the STD are its long term stability, internal protection from lightning via dual gas discharge tubes, internal EMI/RFI filtering, double sealed cable exit and a maintenance free vent filter.

Manufactured for extended life cycle Every STD Series is built using advanced manufacturing techniques to ensure the integrity of the waterproof seal. Double sealing techniques are used and 100 % of all STD Series are submerged at our factory for at least 24 hours. Automated welding procedures and extreme environmental burn in, along with the internal protection against the harsh well conditions give Dylix’ customers the confidence of product reliability over time.

Low power/alternate materials available. From 0-5ft H2O through 0-1500ft H2O, the ST Series is available in either a 4-20 mA or 0-5 Vdc output signal. For remote or battery powered systems, a low power option is available from a 5 Vdc, 1.5 mA supply. To futher enhance battery life, warm-up time is less than 3 mS. Other options include alternate materials of construction or Tefzel© cable.

The post Dylix STD Series – Submersible Pressure Transmitters appeared first on Electro-Meters.

Dylix ST Series – Submersible Pressure Transmitters

Tyler — Tue, 16 Feb 2021 16:20:27 +0000

Designed for low cost of ownership. Dylix’s ST Series Submersible Pressure Transmitter is designed for level/depth measurement applications in shallow or deep wells. Key features of the ST is its long term stability, internal protection from lightning via dual gas discharge tubes, internal EMI/RFI filtering, double sealed cable exit and a maintenance free vent filter.

Manufactured for extended life cycle. Every ST Series is built using advanced manufacturing techniques to ensure the integrity of the waterproof seal. Double sealing techniques are used and 100 % of all ST Series are submerged at our factory for at least 24 hours. Automated welding procedures and extreme environmental burn in, along with the internal protection against the harsh well conditions give Dylix’s customers the confidence of product reliability over time.

The post Dylix ST Series – Submersible Pressure Transmitters appeared first on Electro-Meters.

Dylix BR Series – Ultra-High Pressure Transmitters

Tyler — Tue, 16 Feb 2021 16:12:30 +0000

Designed for measurement of high pressure Dylix’s BR Series is designed for the OEM or end user where ruggedness, high performance, and reliability are required at a competitive price. Key feature of sensing element is its small size, which greatly reduces the amount of force exerted by high pressure. This feature makes the BR ideal for high cyclical / high pressure applications.

Manufactured for extended life cycle The BR Series is built using advanced manufacturing techniques, with automated weld procedures, extreme environmental burn-in and thorough residual stress relieving techniques. The BR is modular and configurable to meet Dylix’s customers exact requirements.

Ruggedized NEMA 4X packaging Every Dylix BR Series is rated to NEMA 4X standards regardless of pressure range or format. Pressure ranges are available from 0-60k psi through 0-100k psi.

The post Dylix BR Series – Ultra-High Pressure Transmitters appeared first on Electro-Meters.

Dylix GXS Series – Submersible Waste water & Harsh Environment Transmitter

Tyler — Tue, 16 Feb 2021 15:53:59 +0000

Designed for clog free operation in sludge / slurry applications Dylix’s GXS submersible pressure transmitter is designed for the OEM and end-users where continuous submersion in sludge/slurry applications is required. The GXS’s key feature is its clog free design of the sensing diaphragm, which improves reliability and lowers maintenance.

Manufactured for reliability in harsh well environments The GXS is manufactured to perform over time in harsh well environments. An internal network of MOV’s and dual gas discharge tubes protect against lightning, while dual sealing techniques ensures the integrity of the waterproof seal. 100% of Dylix’s GXS transmitters are submerged at our factory for at least 24 hours.

“Backed-up” sensing diaphragm The GXS sensing diaphragm is “backed-up” with a solid piece of steal and can withstand the most abrasive / cyclical applications.

The post Dylix GXS Series – Submersible Waste water & Harsh Environment Transmitter appeared first on Electro-Meters.

Dylix GXR Series – General Process Hardened Transmitters

Tyler — Tue, 16 Feb 2021 15:47:06 +0000

Designed for hazardous locations Senex’s GXR Series Pressure Transmitter is designed for use in hazardous locations. The GXR’s entirely welded 316LSST construction is hermetically sealed, and Factory Mutual and Canadian Standards Association Explosion Proof certification are pending.

Manufactured for reliable service in aggressive environments The GXR is manufactured for reliability in aggressive environments where other transmitters fail. Senex’s automated weld procedures, extreme environmental burn in, and the mounting of our electronics to withstand the most severe shock and vibration applications are all geared toward safety and reliability. Additional EMI/RFI filtering with surge protection add to the performance of the GXR.

Alternate materials for service in corrosive environments For corrosive environments where 316L or 15-5 SST are not best suited, the GXR is available in Hasteloy C276, C22 or Inconel 718.

The post Dylix GXR Series – General Process Hardened Transmitters appeared first on Electro-Meters.

Dylix GX Series – Harsh Environment Industrial Pressure Transmitters

Tyler — Tue, 16 Feb 2021 15:40:34 +0000

Designed for performance/cost at single piece quantities. The GX Series Pressure Transducer is designed to provide our customers with an economical solution to their industrial pressure measurement needs. Key feature of the sensing element is its isolation from induced stresses such as mounting torque, thermal excursions, and vibration and shock. The GX is configurable (from single piece orders to large volumes) to meet Dylix’s customers needs without sacrificing delivery or large increases in price.

Manufactured for extended life cycle. Dylix’s engineers developed this product to last in high cyclical environments with or without the presence of water hammering or spiking. Advanced manufacturing techniques, extreme environmental burn-in and thorough residual stress relieving procedures ensure the GX Series maintains its performance over time.

Ruggedized NEMA 4X packaging Every Dylix GX Series is rated to NEMA 4X standards regardless of the output (mVdc, Vdc, or mAdc) or pressure format (gage, absolute, or vacuum). Pressure ranges are available from 0-3 psig through 0-15,000 psig.

The post Dylix GX Series – Harsh Environment Industrial Pressure Transmitters appeared first on Electro-Meters.

Dylix FS Series – Sanitary Pressure Transmitters

Tyler — Tue, 16 Feb 2021 15:35:43 +0000

Designed for the sanitary markets Dylix’s FS Series is designed for the OEM and end user where ruggedness, high performance, and reliability are required at a competitive price. Key feature of the sensing element is its isolation from induced stresses, which maintains negligible zero and span offsets due to the clamping force effects. This product is modular and is configurable to meet our customers exact needs.

Manufactured for reliability in CIP and wash-down areas The FS is built using advanced manufacturing techniques, with automated welding procedures, extreme environmental burn-in and thorough residual stress relieving techniques. The FS Series NEMA 4X packaging ensures reliable service in the wash-down environments of the sanitary industry regardless of signal output or pressure format.

“Backed-up” sensing diaphragm Every FS Series sensing diaphragm is “backed-up” with a solid piece of steel which greatly improves the resistance to sharp objects and overpressure.

The post Dylix FS Series – Sanitary Pressure Transmitters appeared first on Electro-Meters.

Dylix FL Series – General Industrial Flush Mount Transmitters

Tyler — Tue, 16 Feb 2021 15:32:56 +0000

Non-Filled Flush Mount. 0-100 psi through 0-7,500 psi Designed for the highest system integrity. Dylix’s FL Series Pressure Transmitter is designed for the OEM and end user where ruggedness, high performance, and reliability are required at a competitive price. Key feature of the FL is its non oil –filled sensing element. The sensing diaphragm is machined from a solid piece of steel, and can withstand the most abrasive/cyclical applications.

Manufactured for extended life cycle Dylix’s engineers developed this product to last in high cyclical environments with or without the presence of waterhammering or spiking. Advanced manufacturing techniques, extreme environmental burn-in and thorough residual stress relieving procedures ensure the FL Series maintains its performance over time.

Designed to meet IS standards The FL Series is designed to meet or exceed the standards for IS.

The post Dylix FL Series – General Industrial Flush Mount Transmitters appeared first on Electro-Meters.

Dylix FH Series – Homogenizer Pressure Transmitter

Tyler — Tue, 16 Feb 2021 15:29:19 +0000

“Non-Filled” Flush Diaphragm Sensor for Homogenization Designed for the highest system integrity Dylix’s FH Series Pressure Transmitter is designed for the OEM and end user where ruggedness, high performance, and reliability are required at a competitive price. Key feature of the FH is its non oil –filled sensing element. The sensing diaphragm is machined from a solid piece of steel, and can withstand the most abrasive / cyclical applications.

The post Dylix FH Series – Homogenizer Pressure Transmitter appeared first on Electro-Meters.

Dylix FD Series – Tank Level Transmitters

Tyler — Tue, 16 Feb 2021 15:24:58 +0000

Designed for sanitary markets. Dylix’s FD Series is 3A approved and designed for CIP/SIP systems. Key feature of the sensing element is advanced temperature compensation methods, which not only improves performance over a wide temperature band, but greatly reduces CIP/SIP recovery times.

Manufactured for CIP/SIP & Wash-down areas The FD Series is manufactured for reliability and stability in high humidity environments, and where direct sprays for wash-down purposes are present.

316L SST standard material of construction The FD’s construction of all 316L SST makes it an ideal choice for applications involving aggressive fluids.

The post Dylix FD Series – Tank Level Transmitters appeared first on Electro-Meters.