Eagle Signal Controls
Test and Measurement Instrumentation
- Eagle Signal Controls
Digital Preset Counters
- Time Totalizers/ Elapsed Time Meters
- Reset Timer
- Programmable Timers
- Single Function Timers
- Count Totalizers
- Position Indicators
- Preset Counters
- Rate Meters
//www.danaherspecialtyproducts.com/Eagle_Signal/Products_and_Solutions/.com
- Counters
A preset/predetermining counter accumulates pulses that produces an output signal when its programmed pulse count is met. They are essentially totalizers that can control an external circuit when its counted total matches a preset limit. While one or two presets are typical, up to 16 presets are possible.
Electromechanical/electrical totalizers and predetermining counters can be installed at locations that are remote from the origin of the count signal. The input signal is a voltage source, impulsed through switch or relay contacts, a proximity switch, or photoelectric sensor.
- Preset Counters
- Tach (Rate) and Position Counters
MAX Series, 16 Preset Counter
The MAX Count 6 Advanced & MAX Count 6S Advanced is a powerful sixteen preset (Sequential) counter with a presettable Batch Counter and a Background Totalizer.
SX Series Preset Counter
The SX300 Counter is designed for a single direction count input from a solid state sensor or switch. The DC input versions will count up to 2500 counts per second. The AC input version will count up to 2500 counts per minute.
DZ100 Series, Electro-mechanical Preset Counters
The DZ100 series is a solid state counter which uses CMOS integrated circuits for the counting function. Counter output action occurs when the count total (as indicated by front mounted thumb-wheel switches) is reached.
Max Tach Advanced Controllers
MAX Tach Advanced is a Powerful RATE and DRAW Indicator with programmable alarms. MAX Tach Advanced features guided programming using English prompts and annunciators for easy setup and operation.
Max Position Advanced Controllers
MAX Position Advanced is a programmable position indicator and preset counter with a Reference input and set point, four position presets and eight complimentary outputs.