Model 8220 [Cat. 2130.90] Compteur de qualité d’énergie

Model 8220 [Catalog No. 2130.90] Power Quality Meter
  • Mesure jusqu’à 660Vrms ou VDC
  • Mesure jusqu’à 6500AAC ou 1400ADC (en fonction de la sonde)
  • Affiche les volts et ampères minimum, maximum et moyen, le facteur de crête, le pic et le facteur K
  • Calcule et affiche les watts, les VAR et les VA, le facteur de puissance et le facteur de puissance de déplacement pour les systèmes monophasé et équilibré trois –
  • Affiche le THD pour la tension et le courant
  • Affiche les valeurs harmoniques individuelles pour les volts et les ampères jusqu’au 50ème harmonique
  • Capture et affiche le nombre de tours et le nombre de tours en cours d’appel
  • Affiche la température en ° F ou ° C
  • Affiche la résistance jusqu’à 2000Ω / effectue la continuité & amp; tests de diodes
  • Sauvegarde jusqu’à neuf jeux complets de lectures pour toutes les mesures en volts, ampères, puissances, harmoniques et autres
  • Configurable à partir du logiciel DataView® ou du panneau avant
  • Inclut le logiciel DataView® gratuit pour le téléchargement et le stockage de données, l’affichage en temps réel des formes d’onde, l’analyse et la génération de rapports
  • Motor start-up analysis
  • Determine phase rotation and motor RPM
  • Detect hot spots in wiring and equipment
  • Verification of power distribution circuits
  • Measurement and recording of power system quality(kW, VA, VAR)
  • Energy metering (kVAh, VARh, kWh)
  • In plant troubleshooting of power distribution panels and individual machinery
Product Description:
The Model 8220 is a single-phase AC + DC power meter with an electroluminescent backlit digital display and is rated to 600V Cat III.It is a measurement tool for electrical parameters and distribution network disturbances, enabling the user to obtain instant measurements of the main characteristics of a single-phase network (voltage, current, power, voltage and current harmonics, etc.) and to monitor machinery in operation (temperature, inrush current and duration of operation, distance of windings and rotational speed). The Model 8220’s accuracy is better than 1% (excluding current sensors). It has a great flexibility due to AEMC’s range of current sensors, measuring from a few hundred milliamps to several thousand amps. The Model 8220 is designed for technicians, control and maintenance engineers, as well as electrical contractors and educators.
Models Available:

Model 8220 with MN93 [Catalog No. 2130.91] Power Quality Meter Model 8220 w/MN93 (240A)

Model 8220 with SR193 [Catalog No. 2130.92] Power Quality Meter Model 8229 w/SR193 (1200A)

Model 8220 with AmpFlex® 193-24 [Catalog No. 2130.93] Power Quality Meter Model 8220 w/AmpFlex® 193-24 (6500A)

Model 8220 with AmpFlex® 193-36 [Catalog No. 2130.94] Power Quality Meter Model 8220 w/AmpFlex® 193-36 (6500A)

Model 8220 with MR193 [Catalog No. 2130.95] Power Quality Meter Model 8220 w/MR193 (1000AAC/1400ADC)

Model 8220 with MN193 [Catalog No. 2130.96] Power Quality Meter Model 8220 w/MN193 (6A/120A)

  • Waveforms – Display Volts, Amps, THD and Crest Factor by phase or for all phases. You can display all the voltage inputs on one screen, phase-to-phase or phase-to-neutral. Real-time phasor diagrams can be displayed for volts and amps.
  • Harmonics – Display Harmonics out to the 50th for Volts, Amps and VA. Individual Harmonics are displayed as a percentage and in real value. Harmonic direction and sequencing can also be displayed.
  • Transients – Set, capture and display transients. You select the threshold and the number of transients to capture. PowerPad then captures four waveforms for each transient; the triggering waveform as well as one pre- and two post-triggered waveforms.
  • Alarms – Configure, capture and display alarm events. Each captured alarm event will show the variable and the value as well as the time and duration.
  • Record – Set up and record trend data at selectable rates from one sample/second to one sample every 15 minutes on as many as 22 different variables for all phases.
Model 8220
Sampling Frequency 256 samples per cycle
Voltage (TRMS) Phase-to-Phase: 660VPhase-to-Neutral: 600V
Current (TRMS) MN Clamp: 5mA to 120A or 2 to 240AMR Clamp: 10 to 1000AAC, 10 to 1400ADC SR Clamp: 0 to 1200A AmpFlex®: 0 to 6500A
RMS Voltages 15 to 600V 0.1V ±0.5% ± 2cts
DC Voltage Component 15 to 600V 0.1V ±1% ± 2cts
Phase Peak Voltages 15 to 600V 1V ±(1% + 5cts)
Frequency (Hz) 40 to 70Hz 0.01Hz ±0.01Hz
Current Probes (Arms)
MN Clamp 0 to 240A 0.1A ±(0.5% + 2cts)
SR Clamp 0 to 1200A 0.1A;1A ≥ 1000A ±(0.5% + 2cts)
AmpFlex® Probe 10 to 6500A 0.1A;1A ≥ 1000A ±(0.5% + 1A)
Active Power (kW) 0 to 9999kW 4 digits(10,000ct) ±1% ± 1ct @ PF ≥0.8
Reactive Power (kVAR) 0 to 9999kVAR 4 digits(10,000ct) ±1% ± 1ct @ PF ≤0.8
Apparent Power (kVA) 0 to 9999kVA 4 digits(10,000ct) ±1% ± 1ct
Power Factor(PF & DPF) -1.000 to 1.000 0.001 ±(1.5% + 0.01)
Harmonics(1st to 50th) 0 to 999% 0.1% ±1% + 5cts
K-factor (Akf) 1 to 99.99 0.01 ±5% ± 1ct
Phase Rotation
Diode Test
Resistance 2000Ω NA NA
Temperature °F or °C NA NA
Display Three-line backlit digital display with custom icons
Communication Port Optically isolated USB
Power Source NiMH AA rechargeable battery packAC Supply: 120/230VAC (50/60Hz)
Power SourceBattery Life ≥Eight hrs with display on≥40 hrs with display off (recording mode)
Operating Temperature 32° to 122°F (0° to 50°C)
Storage Temperature -4° to 122°F (-20° to +50°C)
Dimensions 8.3 x 4.3 x 2.4″ (211 x 108 x 60mm)
Weight 1.9 lbs (0.88kg)
Rating EN 61010, 600V Cat. III, Pollution Degree 2
pdf_pic Downloads: Specifications
index mail web