Model K110 [Cat. 2111.73] DC/AC MicroProbe (10mV/mA-450mA max)

Model K110 [Cat. 2111.73] DC/AC MicroProbe (10mV/mA-450mA max)
  • Measures extremely low level DC from 100µA
  • Outputs signal proportional to total current (DC + AC)
  • Low noise
  • Ultra-compact size and non-contact clamp-on convenience
  • Simple plug-in operation
  • Designed for use with DMMs and oscilloscopes
  • Accurate display of waveforms
  • No range or mode (AC/DC) switching required
  • Extended battery life
  • Red LED indicated momentary or continuous overload
  • Green LED indicates power and battery condition
  • industrial process controls (4 to 20mA current loops)
  • Electronic circuit design, testing and repair
  • Automobile wiring and engine control systems
  • Avionics systems maintenance and repair
  • Shipboard maintenance and repair
  • Fault and signal location in complex networks
  • Ground and leakage current measurement
  • Pre-deployment testing of power-conscious equipment
Product Description:
space he DC/AC Microprobe Model K110 measures as low as 100µA AC or DC. The unit has proportional mV output for direct readings on DMMs. The high accuracy K110 is ideal for calibration of current loop process instruments (e.g., 4 to 20mA or 0 to 20mA).
Current Range 0 to 300mArms/0 to ±450mADC
Measurement Range 0 to ±450mA
Output Signal(s) 10mV/mA
Accuracy(450mA Range) AC ±0.8% of Reading ± 200μA
DC ±0.5% of Reading ± 150μA
Overload Red LED indicates momentary or continuous overload
Frequency Range DC to 1.5kHz (@ -3dB sine)
Impedance 200Ω
Working Voltage 300V, EN 61010-1, Cat. II
Battery 9V Alkaline, NEDA 1604, 6LR61 or IEC 6 LF22(Approx. 20 hours life)
Output Termination 4mm Safety Banana Jacks
Operating Temperature -14° to 131°F (-10° to 55°C)
Storage Temperature -40° to 176°F (-40° to 80°C)
Operating RelativeHumidity <95% @ ≤ 35°C, 75% @ 55°C
Zero Adjustment ±25mA approx. by 10 turn knob at base of case
Maximum Conductor Size 3/16″, 0.180″ (4.5mm)
Dimensions Probe: 4.4 x 0.6 x 1.0″ (111 x 15 x 25mm);Electronic Module: 4.9 x 2.5 x 1.1″ (124 x 64 x 28mm)
Weight 9 oz (250g)
Electrical EN 61010-2-32
Double Insulation Yes
CE Mark Yes
pdf_pic Downloads: Specifications