DL850V (Vehicle edition) ScopeCorders – Noise-resistant, Ultra-fast Memory

Multichannel Scope and Recorder -Measures Fast signals with High Accuracy and Time Resolution – up to 17 plug-in modules available


  • Lineup includes 4 channel, 500MHz or 1GHz bandwidth models
  • 4CH Analog +16 /32bit Logic
  • High speed waveform acquisition and history memory
  • Intuitive Operation and High Performance
  • Wide range of trigger functions
  • Real time filter and High resolution mode — for precision waveform observation
  • Search & Zoom — Extract the desired waveforms for detailed analysis
  • Automated measurement of waveform parameters — Automatically display numeric values
  • Computation functions — quickly analyze information ‘hiding’ in waveforms
||||| Features for embedded systems development and evaluation
  • Computing and observing actuator drive waveforms in real time
  • Evaluation of switching power supply circuit characteristics
  • Evaluating A/D conversion circuits with Virtual D/A computation
  • Evaluation of SD card busses/SDIO
  • Check PCI bus performance with 32-bit logic input
  • Real-Time Serial Bus Analysis
  • Parallel bus observation
  • Analysis of serial interface memory communications


  • DL850V Vehicle Edition
  • Memory expansion up to 2GPts(W)
  • User-defined and Real time math functions


  • Deep memory acquisition of data and expanded acquisition of waveform phenomena
  • When ever you need hybrid instrument to recorder phenomena with the function of an oscilloscope
  • Analysis for R&D


Obtain high speeds and unparalleled accuracy with the Yokogawa DL850 modular input series. These real-time waveform recorders combine the benefits of a high-speed oscilloscope and a traditional data acquisition recorder "ScopeCorder". Choose from 15 input modules to configure the DL850 to a specific application. Measure voltage, current, strain, acceleration, and other phenomena simultaneously by simply removing and replacing the appropriate modules. Accurately capture waveforms with enhanced triggers for advanced data capturing with acquisition rates of up to 6.25 Gb/s and up to 128 logic channels.
With high speed sampling, high isolation withstand voltage, and multichannel measurements, the DL850 Series offers powerful support in the development, evaluation, and quality control of energy efficient devices. Allowing the user to make capture waveform anomalies with confidence.

||||| DL850V Vehicle Edition ScopeCorder Description

DL850V Vehicle Edition ScopeCorder

The DL850V ScopeCorder Vehicle Edition can include a CAN Monitor Module (model 720240) enabling the monitoring of CAN protocol communication data as analog values, from which triggers can be activated. Correlations can be identified between communication data on the CAN bus: voltage, temperature, sensor signals, other analog data and ECU control logic signals- this lets the user to evaluate the overall CAN system.

New — CAN Bus monitor for vehicle development and design

  • The CAN Monitor Module (model 720240) enables the monitoring of CAN protocol communication data as analog values, from which triggers can be activated. Correlations can be identified between communication data on the CAN bus; voltage, temperature, sensor signals, and other analog data; and ECU control logic signals-this lets you evaluate the overall CAN system.

CAN Data Acquisition and Trend Display

CAN bus monitor module (model 720240)

  • You can also use DBC database files (.dbc) to specify the data to be monitored. Database (definition) files can be loaded and edited by our free Symbol Editor program for conversion to an .sbl file that can be read by the DL850V. Instead of digital code (hex or numeric), you can monitor CAN signals using Messages, Signal names, and physical units.
  • Model 720240 CAN Bus Monitor module Main specifications
  • Input ports: 2 (60 signals x 2 ports)
  • Input ports: 2 (60 signals x 2 ports)
  • Supported protocols: Physical layer: ISO-11898 (High Speed Communication)
    CAN in Automation: CAN2.0B (Standard & extended message format)
  • Bit rates: 10 k, 20 k, 33.3 k, 50 k, 62.5 k, 66.7 k, 83.3 k, 125 k, 250 k, 500 k, 800 k, 1 Mbps
  • You can check physical value trends of CAN bus data and the corresponding actually measured waveforms on the same screen at once. For example, ignition switch ON/OFF signal and the ignition command’s corresponding CAN signal can be displayed together with the actually-measured signal from the related voltage sensor or other devices in order to verify any correlation between these signals.
  • Literature
  • Specifications
  • Features/Functions
  • Functions
  • Modules
  • Acc.

Model: Yokogawa DL850 ScopeCorder

Models DL850 DL850V
Memory (main unit) 250MPts(W) memory 250MPts(W) memory
Max. Record
Standard 250 Mpts (1 CH)
10 Mpts/CH (16 CH)
250 Mpts (1 CH)
10 Mpts/CH (16 CH)
/M1 option 1 Gpts (1CH)
50 Mpts/CH (16 CH)
1 Gpts (1CH)
50 Mpts/CH (16 CH)
/M2 option 2 Gpts (1CH)
100 Mpts/CH (16 CH)
2 Gpts (1CH)
100 Mpts/CH (16 CH)
  * Dependent on modules and no. of channels
Channels 16CH/Slot, 128CH/Unit 32CH/Slot, 160CH/Unit
(Maximum simultaneous display waveform is 64 waveforms x 4 screen selectable) Maximum simultaneous display waveform is 64 waveforms x 4 screen selectable)
Number of plug-in module slots 8 total
Max 4 for 720210 modules
Max 2 for 720210 modules
Time axis accuracy ±0.005%
Display: 10.4-inch TFT color LCD monitor, 1024×768(XGA)
Display res. of waveform display: 1selectable either 801×656 (normal waveform display) or
1001×656 (wide waveform display)
Display format: Max 3 simultaneous displays available
In addition to main, 2 more waveforms available among
zoom 1, zoom 2, XY1, XY2, FFT1, FFT2 (/G2 option)
Acquisition mode: Normal Normal waveform acquisition
Envelope Maximum sample rate regardless of record time, holds peak value
Averaging Average count 2 to 65536 (2n steps)
Box (av.) Increase A/D resolution up to 4 bits (max 16 bits)
Dual capture
Main waveform
(low speed)
Maximum sample rate 100kS/s (roll mode region)
Maximum record length 100M point
Capture waveform
(high speed)
Maximum sample rate 100MS/s)
Maximum record length 500k point
Performs data acquisition on the same waveform at 2 different sample rates
Real Time HD Recording
Maximum sample rate Maximum1MS/s (1CH used), 100kS/s (16CH used) depends on channel used
(/HD0,/HD1 option) Capacity Depends on HDD vacant capacity
Action Data can be stored in the hard disc at the same time of acquisition in accordance with trigger mode
Roll mode: It is effective when the trigger mode is set to auto/auto level/single/ON start, and time axis is greater than 100ms/div.
History memory: Maximum 5000 pages
Built-in Printer (/B5 Option)
Print type: Thermal line/dot matrix
Paper width: 112 mm
Effective print width: 104 mm (832 dots)
Feeding direction res.: 8dot/mm
PC Card Interface
Slots 2 (front panel (1), rear panel (1))
Supported card GPIB card (National Instruments NI PCMCIA-GPIB card),
Flash ATA memory card (PC card TYPE II), CF card + adapter
card, and various hard disk type PC cards
SD card slot: Memory cards conforms to SD, SDHC, maximum capacity 16GB
USB memory: Mass storage device which conforms to USB Mass
Storage Class Ver.1.1
External HDD Hard disc conforms to eSATA Built-in (/HD0 option)
Built-in HDD 2.5 inch, 160GB, FAT32 (/HD1 option)
Power supply: 100 to 120VAC/220 to 240VAC (automatic switching) — 50/60Hz
Power consumption: Max 200 VA
Operating Temperature: 5C° to 40C°
Dimensions: Approx.355mm(W)×259mm(H)×180mm(D), excluding handle
Weight: Approx. 6.5kg 6.5kg( for main unit only, include /B5/M2/HD1/P4 options)

With 15 unique plug-in module types, the DL850 can handle nearly any measurement task

The DL850 is backwards-compatible with all modules of its predecessor, the DL750. In addition, four new modules have been added to the lineup. Combine modules at will to measure anything from minute voltages to high-speed, high withstand voltages.

  • High-speed Voltage – NEW
  • High-precision voltage
  • Temperature
  • Acceleration
  • Logic Input – NEW
  • High Voltage
  • Multichannel Voltage – NEW
  • Strain
  • Frequency
  • CAN Monitoring (with the DL850V) – NEW


Measure Fast Signals with High Time Resolution and Accuracy

Never miss the waveforms you want to capture.

  • High speed (100 MS/s), High resolution (12-bit), 1kV isolated measurements. — Yokogawa’s isoPRO technology offers industry leading isolation performance at the highest speeds. The isoPRO core technology is designed with energy savings applications in mind. It gives you the performance needed to develop high efficiency inverters, which employ high voltages, large currents, and high operating speeds.
    Using 720210High-speed 100 MS/s 12-Bit Isolation Module
  • Using high speed optical fiber-based transmissions, the module achieves high speed ADC clock and data isolation.

Advanced – Measurement Points – Up to 128 CH of voltage input and 128 bits of logic input

  • 16-CH Voltage Input Module (scanner type) can measure at 10 kS/s sample rate even when using all 16 channels. With this module populating all 8 input module slots, the DL850 performs 128-CH voltage measurements.
  • The Logic Input Module supports everything from TTL levels, to high voltage contact closures at up to 10 MS/s. With eight logic modules, the DL850 can monitor and capture 128 bits of logic.

Large (up to 2 GPoint with /M2 option) memory offers long duration measurement and two instantaneous zoom locations

— Comes standard with 250 MPoints of memory, expandable with 1or 2 GPoint options. Large capacity memory does not simply provide longer durations of measurement.

  • High speed update The DL850 Series DSO Models not only updates the display at high speed, but also include a function to recal up to 2000 screens worth of past waveforms.
  • High-speed screen updating alone does not allow users to take full advantage of the digital oscilloscope. Rather, the ability to redisplay and analyzing individual waveforms unleash the digital oscilloscope’s full potential.

Long Duration, Continuous Saving of Waveforms

  • Measured data can be streamed directly to a built-in 160 GB hard disk (/HD1 option) or through the external HDD interface (/HD0 option). With long duration evaluation testing, measurements can be performed at 100 kS/s on 16 channels simultaneously for 10 hours
  • Data being continuously recorded on the DL850/DL850V’s built-in HDD or external HDD can be transferred to a PC without stopping measurement. You can display and analyze the transferred waveform data using Xviewer, an accessory program for the PC.

Search & Zoom – History Function

— When you spot an abnormal phenomenon during repetitive high speed measurements, often the anomaly has disappeared from the screen by the time you press Stop. Always active, the "History" function automatically divides the long memory into up to 5,000 "history waveforms" that can be re-displayed at any time.

  • Searching history waveforms – When you want to extract specific c abnormal phenomena, you can perform condition-based searches inside the history waveforms. You can create a rectangular zone on screen and extract only waveforms that pass through or do not pass through the zone. You can also extract data based on parameters such as amplitude or RMS.

Dual-window Zoom function simultaneously zooms in on two areas

  • Two individual zoom factors and positions can be set with independent time scales and displayed simultaneously. Also, using the auto scroll function, you can automatically scroll waveforms captured in long memory and change the position of the zoom areas. Choose any display position with forward, backward, fast forward, pause, and other controls. Dual-window zoom function

Catch transients in durability with high-speed sampling – Dual Capture

  • To visualize long term trends in durability testing and other situations, data is typically acquired at low speed sample rates. On the other hand, suddenly-occurring transitional phenomena should be captured at high-speed sample rates.
    The "Dual Capture" feature resolves these conflicting requirements by recording at two different sampling rates.
  • Zoom Waveform – You can record up to 5,000 phenomena of high speed trigger measurements (up to 100 MS/s) at a record length of 5-500 kPoints while taking trend measurements at up to 100 kS/s.
  • Event Waveform -Displays the timing at which high speed "sub" waveforms are acquired
  • Low Speed Main Waveform – Max: 100 kS/s Trend waveform displayed in a low-speed Roll mode
  • Capture Waveform – Max 100 MS/s Capture transients with high speed trigger measurement

Processes Noise Rejection and Executes Power Computations in Real Time – Real time Math

  • The DL850 is armed with a dedicated DSP (digital signal processor) for computations that enables between-channel math during waveform capture. These between-channel computations are powerful because they can be set up separately from filter computations. In addition to FIR, IIR, Gauss, and moving average filters, you can use arithmetic with coefficients, integrals and differentials, and higher-order equations.

User Defined Computation (/G2 option)

  • The DL comes standard with arithmetic, time shift, FFT, and other computations that enable you to display waveforms with offsets and skew corrections. And with user defined computations (/G2 option), you can create equations using a combination of differentials and integrals, digital filters, and a wealth of other functions.

Automatically extract waveform amplitude, frequency, and other parameters – Waveform parameter and statistical computation

  • Extract and display up to 24 of the 26 available waveform parameters (amplitude, frequency, etc.) simultaneously. Menus can be shown as lists of easy-to-read icons.

Detect Abnormal Waveforms, Notify Users, and Determine Pass/Fail – Go/NO-GO Determination

  • The DL can determine whether waveforms or computed values of waveform parameters meet (GO) or do not meet (NO-GO) conditions that are specified in advance. Upon judgment of the measured results, a pre-set action is performed and users are notified that an abnormal waveform was observed, along with the pass/fail determination. This is a very useful function for such things as studying signals from manufacturing lines of electronic devices and tracing abnormal phenomena

Synchronize multiple units performing simultaneous measurements

Synchronized measurement across multiple DL850 units is made possible by inputting an IRIG time code signal.* The DL850/DL850V’s internal clock is also synchronized (locked) to the IRIG signal. Therefore, timing comparisons are highly precise even when continuously recording over long periods of time.

  • You can make periodic observations remotely by connecting commercially available GPS receivers that have IRIG output and using the Time Trigger function

Check the relationship between hysteresis and phase

XY display function

  • You can confirm the relationship between two signals using the X-Y display. This can be applied to measurements such as the phase angle of two sine waves. You can select four combinations on the X and Y axes, and therefore display multiple X-Y waveforms simultaneously and find relationships between them. Simultaneous observation of X-Y waveforms and normal T-Y waveforms (waveform display using voltage and time axes) is also possible.
  • (1) Ensures security Simply remove the drive after measurement to protect data. Or, keep restricted data only at the measurement site.
  • (2) Increases capacity If the external hard drive becomes full, you can simply switch to a new one (requires a restart).
  • (3) Hi-speed data transfer A data can be transferred at high speed between a PC and a hard drive
  • Computing dynamic BH characteristics of a magnetic substance On the DL850 you can measure voltage and current, then analyze hysteresis of magnetic flux density B and magnetic field strength H. Energy loss generated by magnetostriction can be evaluated by measuring dynamic BH characteristics


  • With the push of "SNAP SHOT" key, you can save a "snapshot" of the measured waveform (the waveform displayed on screen). The waveform remains saved even if you restart measurement, therefore you can easily compare the snapshot with any newly measured waveforms. Snapshots can also be saved and loaded as files.

Web server

  • The Web Server function displays the screen of any networked DL850/DL850V on a PC via Ethernet. From this screen, you can remotely start or stop measurement, update the DL’s display, and take snapshots (capture images) of the screens.

Saving screen images and displaying thumbnails

  • Screen images can be saved to a specified storage medium in PNG, JPEG, or BMP format. These screen images can be imported into reports or other PC-created documents.
  1. 720210- High-speed 100 MS/s 12-Bit Isolation Module
  2. 701250 – High-Speed 10 MS/s, 12-Bit Isolation Module
  3. 701251 – High-Speed 1 MS/s, 16-Bit Isolation Module
  4. 701255 – High-Speed 10 MS/s, 12-Bit Non-Isolation Module
  5. 701260 – High-Voltage 100 kS/s, 16-Bit Isolation Module
  6. 701220 – High-Speed 200 kS/s, 16-Bit Isolation Module
Temp. Volts
  1. 701261 – Universal (Voltage/ Temp.) Module
  2. 701262 – Universal (Voltage/ Temp.) Module with AAF
  3. 701265 – Temperature, High Precision Voltage Isolation Module
  1. 701270 – Strain Module (NDIS)
  2. 701271 – Strain Module (DSUB, Shunt-Cal)
  1. 701275 – Acceleration/Voltage Module (with AAF)
  1. 701280 – Frequency Module
  1. 720230 – Logic input Module
  1. 720240 – High Speed 100 kS/s, 16-bit CAN Module
  Model Sample Rate Res.   Ch Max. V Acc
Volts High speed · High voltage · Isolated
•720210 100 MS/s 12-Bit 20 MHz 2 1000 V*2
200 V*3
16CH voltage measurement (Scan-type)
•720220 200kS/s 16-Bit 5 kHz 2 42V*3 ±0.3%
High noise immunity
• 701250 10 MS/s 12-Bit 3 MHz 2 600 V*2
250 V*3
High sensitivity range (1mV/div), low noise(±100 μV typ.), and high noise immunity
• 701251 1 MS/s 16-Bit 300 kHz 2 600 V*2
140 V*3
Non-isolation version of model 701250
• 701255 10 MS/s 12-Bit 3 MHz 2 600 V*4
250 V*3
with RMS, and high noise immunity
• 701260 100 kS/s 16-Bit 40 kHz 2 1000 V*2
850 V*3
Thermocouple (K, E, J, T, L, U, N, R, S, B, W, iron-doped gold/chromel)
• 701261 100 kS/s (V),
500 S/s (Temp)
16-Bit (V),
0.1: (Temp)
40 kHz (V),
100 Hz (Temp)
2 42 V ±0.25% (V)
Thermocouple (K, E, J, T, L, U, N, R, S, B, W, iron-doped gold/chromel), with AAF
• 701262 100 kS/s (V),
500 S/s (Temp)
>16-Bit (V),
0.1: (Temp)
40 kHz (V),
100 Hz (Temp)
2 42 V ±0.25% (V)
Thermocouple (K, E, J, T, L, U, N, R, S, B, W, iron-doped gold/chromel), high sensitivity range (0.1mV/div), and low noise (±4 μV typ.)
• 701265 500 S/s (V),
500 S/s (Temp)
16-Bit (V),
0.1: (Temp)
100 Hz 2 42 V ±0.08 (V)
Strain Supports strain NDIS, 2, 5, 10 V built-in bridge power supply
• 701270 100 kS/s 16-Bit 20 kHz 2 10 V ±0.5% (Strain)
Supports strain DSUB, 2, 5, 10 V built-in bridge power supply, and shunt CAL
• 701271 100 kS/s 16-Bit 20 kHz 2 10 V ±0.5% (Strain)
built-in anti-aliasing filter, Supports built-in amp type acceleration sensors
(4 mA/22 V)
• 701275 100 kS/s 16-Bit 40 kHz 2 42 V ±0.25% (V)
±0.5% (Acc.)
Hz Measurement frequency of 0.01 Hz to 200 kHz, Measured parameters (frequency, rpm, period, duty, power supply frequency, distance, speed)
• 701280 25 kS/s 16-Bit res. 50 ns 2 420 V*2
42 V*3
±0.1% (Hz)
Logic 8-bit/port) x 2, compatible with four-type of logic probe (sold separately)
•720230 10 kS/s 8-bit
x 2 ports
CAN CAN Data of max. 16-bit allowable
•720240 100 kS/s 2 10V
*1: Probes are not included with any modules.
*2: In combination with 10:1 probe model 700929
*3: Direct input
*4: In combination with 10:1 probe model 701940
  • Passive Probes
  • Isolated Probes
  • Differential Probes
  • Current Probes
  • 100:1 Probes
  • Bridge Head Probes
  • Logic Probes
  • Software
  • Miscellaneous- Leads
Passive Probes
arrow 701940 — 10 MΩ (10:1), 10 MHz, 1.5 m — Passive probe Passive Probe
Isolated Probes
arrow 701947 — 100:1 DC to 200MHz (-3dB) /100MΩ/1,000V — Isolated probe 100:1 Probe
Differential Probes
arrow 700924 — DC up to 100 MHz (-3 dB) bandwidth/4MΩ/max. — Differential Probe Differential probe capable of wide-band, high-voltage floating measurements
arrow 701926 —DC to 50MHz bandwidth / 50MΩ / max. ±5000 Vrms—Differential Probe High Voltage Differential Probe for the DL series
Current Probes
arrow 701930 — DC to 10 MHz bandwidth, 150 Arms — Current probe Bandwidth: DC to 10 MHz (-3dB)
arrow 701931 —DC to 2 MHz bandwidth, 500 Arms — Current probe Bandwidth: DC to 2 MHz (-3dB)
arrow 701933 — DC to 50 MHz BW, 30 Arms — Current probe Bandwidth: DC to 2/10/50/100 MHz; current measurement: Max 30/150/500 A
1 MΩ BNC inputs without the need for an external amplifier
100:1 Probes
arrow 701947 — 100:1 DC to 200MHz (-3dB) /100MΩ/1,000V — Isolated probe 100:1 Probe
Bridge Head Probes
arrow 701955 —(NDIS, 120 Ω)—Bridge Head Probe Bridge resistance: 120Ω
arrow 701956 —(NDIS, 350Ω)—Bridge Head Probe Bridge resistance: 350Ω
arrow 701957 —(Dsub, 120 Ω)—Bridge Head Pro bee D-sub cable (5 m) included. Supports Shunt-Cal.
arrow 701958 —(Dsub, 120 Ω)—Bridge Head Probe D-sub cable (5 m) included. Supports Shunt-Cal.
Logic Probes
  702911 — Logic Probe 8-Bit, 1 m, non-Isolated, TTL level/Contact Input, Includes one each of the B9879PX and B9879KX connection leads.
  702912 — Logic Probe 8-Bit, 3 m, non-Isolated, TTL level/Contact Input, Includes one each of the B9879PX and B9879KX connection leads.
  700986 — 100kΩ, ±42 V (DC +AC peak) 1.5m, Non-isolated— Logic Probe 8-bit, non-isolated, response speed: 1µs, two measurement leads (B9879PX and B9879KX) included
  700987 — 100kΩ, ±42 V (DC +AC peak) 1.5m, isolated— Logic Probe 8-Bit, each channel isolated
arrow 701992 —Xviewer— For DL series Software
arrow 701992-62E —Xviewer— For DL advanced series Software
arrow 701934 PROBE POWER SUPPLY A power supply for current probes, FET probes, and differential probes. Supplies power for up to four probes, including large current probes.
  1:1 Safety BNC Adapter Lead(in combination with following) 1000 Vrms-CAT II (BNC-BNC)

701959— Safety Mini-Clip (Hook type) 1000 Vrms-CAT II, red and black set

701954— Large Alligator-Clip (Dolphin type) 1000 Vrms-CAT II, red and black set

758929— Alligator Clip Adaptor Set (Rated Voltage 1000 V) 1000 Vrms-CAT II, red and black set

758922— Alligator Clip Adaptor Set (Rated Voltage 300 V)300 Vrms-CAT II, red and black set

758321— (Fork Terminal Adapter Set) 1000 Vrms-CAT II, red and black set

  701902 —Safety BNC-BNC Cable (1 m) 1000 Vrms-CAT II (BNC-BNC)
  701903 —Safety BNC-BNC Cable (2 m) 1000 Vrms-CAT II (BNC-BNC)
  758924 — Safety BNC-banana Adapter 500 Vrms-CAT II
  758917 — Measurement Lead Set Measurement leads (2 per set) Alligator-Clip is required separately.
  720911 — External I/O Cable For external I/O connection
  B9988AE —Printer Roll Paper
  701963 — Soft Carrying Case for DL850 & DL850V