Yokogawa 96001 Clamp-on Probe for Oscilloscopes & Recorders

     Product Information:

  • Fit to waveform measurement using oscilloscopes and oscillographic recorder
  • 20Hz to 20kHz wide frequency characteristics
  • 33mm in diameter of measurable conductor)
  • Compact and light with high-performance
  • Can be connected to a digital multimeter
  • Need not be connected to a power source
Product Specifications:
Measuring Range 0 to 400 A ACrms (600 A peak)
Output Voltage 0 to 4 V ACrms (10mV/A)
Accuracy(at 23 deg.C ±5 deg.C,sine wave input) (amplitude) ±1.5% of rdg ±0.4mV (20Hz to 40Hz)
±1.0% of rdg ±0.2mV (40Hz to 1kHz)
±(0.8 + 0.2 x f kHz)% of rdg ±(0.2 + 0.04 x f kHz)mV (1 to 20kHz)
(phase) Within ±3.0 deg.C (40Hz to 1kHz)
Temperature Coefficient 0.05% fs/deg.C in a range of 0 deg.C to 18 deg.C and 28 deg.C to 50 deg.C
Maximum allowable current(rms)
See the figure to the right
Output Impedance Approximately 30Ω
Load Impedance 100kΩ min.//100 pF max.
Effect of external magnetic field 2mV(0.2A)or less at 400A/m
Voltage of circuit under measurement 600V ACrms maximum
Diameter of applicable conductor Maximum diameter of 33 mm
Operating temperature and humidity limits 0 deg.C to 50 deg.C, 80% RH max.(non-condensing)
Storage temperature limits -20 deg.C to 60 deg.C (non-condensing)
Withstanding Voltage 3.7kV AC for one minute(core and case, and core and output terminals)
Safety Conforms to IEC 1010.
External Dimensions Approximately 70(W) x 130(H) x 30(D)mm
Weight Approximately 220g
Output cord length Approximately 2.5 meters(with banana plug)
Accessories One portable case and one instruction manual
mail web