• YOKOGAWA

UP150 {1/16 DIN} Green Programmable Temperature Controllers

Green Series Temperature Controllers(1/16 DIN) (Affordable compact Ramp Soak controllers)

Features

  • 4 digit LED display
  • 2 °C ±1 digit for TC — 1°C ±1 digit for RTD — ±.03% 1 digit for mV/V input
  • Capability of one program pattern consisting of 16 segments
  • Standard two event outputs
  • Universal inputs
  • 1 loop, RUN/RESET, HOLD/Cancel HOLD
  • Ramp-Soak function
  • Alarm types: 22 types
  • ON/OFF. time-proportional and continuous PID
  • 2 (alarm or timer outputs) and Retransmission
  • IP65 splash-proof and dust-proof designed front panel
  • Optional retransmission output of measured value (PV)
IIII [+] Read More
  • Communications
    • RS485 communication (optional)
    • Modbus Communication (optional)
    • PC-Link & Ladder protocols are supported

Applications

  • Standard ON/OFF control applications
  • Heating and cooling control applications such as ceramic ovens
  • small furnaces and water heating and cooling

Description

The UP150 Programmable Temperature Controller (1/16 DIN size) is a compact, easy to program controller with ramp-soak capabilities. This single-loop controller has a one program pattern consisting of 16 segments and 2 event outputs, allowing it to control heating and cooling simultaneously.
IIII [+] Read More

The UP150 has four types of control modes: PID, ON / OFF, Ramp / Soak and Manual, as well as, up to 22 Alarm types adding versatility to your control needs. This powerful and affordable controller is available with Auto Tune and the “SUPER” overshoot suppression function to provide accurate control of your application. Optional external contact input, retransmission output and communication functions are available for greater communication flexibility.

  • Literature
  • Specifications
  • Accessories
Literature and Technical Information
pdf icon

Panel Instrumentation

++ UP150 | General specification sheet (188 kB)
++ UP150 | Manual 001 (717 kB)
++ UP150 | Manual 002 (725 kB)
++ UP150 | Brochure 001 (1.1 MB)
++ UP150 | Brochure 002 (803 kB)
++ UP150| Communication Settings (344 kB)
Software
++ Literature – LL1200- General Specifications (78 kB)
Model: Yokogawa UP150 Programming Controllers (ramp-soak)
PV/SP Data display: 4 digits / 4 digits
PV inputs: 1 universal input (TCs, RTDs, mV, V)
Control
Setpoint Program Pattern: 1
Segment of Program Pattern 16
Control Type: ON/OFF, PID
Control scan period: 500ms
Control Algorithms: ON/OFF, Time-proportional PID, Continuous PID
Control Loops and Mode: 1 loop, RUN/RESET, HOLD/Cancel HOLD
SUPER, Auto tuning SUPER, AT
Control Outputs Select from Relay, Voltage Pulse or 4 to 20mA
PV Retransmission Output: 1 point (4 to 20mA)
Outputs
Digital Outputs 2 (PV event and Time event)
Control Output: Select from Relay, Voltage Pulse or 4 to 20mA
Outputs types
Relay Contact Output: 3 A at 240 V AC or 3 A at 30 V DC
Voltage Pulse Output: On voltage:12 to 18 V DC Off voltage:0.1 V DC or less
Current Output: Output signal: 4 to 20 mA Maximum load resistance: 600 Ω
Inputs
Digital Inputs: 2 (RUN/RESET, HOLD/Cancel HOLD)
Contact Inputs: 2 points for Program operation
Loop power supply
Number: 1 point
Communication (optional)
Type: Two-wire, MODBUS, PC-link, Ladder
Environment
Front Protection: IP65
Power Supply: 24VAC/DC or 90 to 264V AC (±10%), 50/60Hz
Power Consumption: 8VA
General Approvals UL, CE, CSA
Operating Temperature: 0 to 50°C ( 40°C or less in close mounting side-by-side)
Relative Humidity: 20 to 90% RH (no condensation)
Storage Temperature: -25 to 70°C
Dimensions: 48(W)×48(H)×100(D) (mm)
Mounting: Direct panel mounting; mounting bracket, one each for upper and lower mounting
Weight: 0.2 kg
ACCESSORIES

PC-based Setup Parameters & Custom Computation Building Tools

For UT100 Series Controllers
LL100 Light loader computing
The LL100 Parameter Setting Tool is a software package that enables you to set the functional configuration parameters (setup parameters) and operation parameters of a digital indicating controller and a program controller, as well as the program patterns of a program controller, on a PC. The tool lets you the followings:
  • Setting parameters
  • Uploading, downloading and comparing the parameters in the controllers
  • Saving and reading the parameters stored on the storage media
  • Printing out parameters
  • Multi-monitoring
LL200 connection image

Parameter Setting Display

Simple configuration and parameter help text. In addition to parameter setting, the following functions can be used on this display:
  • Uploading, downloading and comparing the parameters in the controller
  • Saving and reading the parameters stored on the storage media
  • Printing out parameters
Proper management of the setting file minimizes the downtime during maintenance and inspection.

Tuning Display

Trend display of measured values (PV), setting values (SP), and control output values (OUT). Manual tuning is much more efficient when trends of the process can be easily viewed. Auto-tuning and output value setting during manual operation are also possible.

Program Pattern Display

Used to create program patterns. The graphical pattern display allows event settings to be checked at a glance.

Multi-monitoring Function for Centralized Monitoring (up to 16 loops)

  • Easy-to-see trend display- Displays the trends of measured values (PV), setting values (SP), and control output values (OUT).
  • Easy-to-understand panel view- Alarms can be checked at a glance.
  • Automatic recognition for quick connection- Can view up to 16 loops.
  • User-friendly tuning display- PID and operational settings can be changed.
  • Saving in CSV format- Saved data can be readily used in Excel, etc.