Introducing Rigol’s RSA5000 Series Real-Time Spectrum Analyzer!
Four new models with frequency ranging from 3.2 GHz to 6.5 GHz. Check out the new RSA500 here and contact EM for a demo, pricing, or to get your very own!
Electro-Meters is proud to announce we now represent Fuji Electric!!
Since 1923, Fuji Electric has been a global leader in manufacturing power electronics products.
Electro-Meters is proud to represent Fuji Electric’s line of Gas Analyzers, Flow Meters, Pressure Transmitters and Recorders.
More information on Fuji products here.
Rigol Technologies, Inc introduces its new DS2000E Series Oscilloscope, a 200MHz, 2 channel scope that continues RIGOL‘s tradition of combining unmatched capabilities at unprecedented price points to transform the test and measurement industry !
The DS2000E is available at either 100MHz or 200MHz bandwidths. All models provide 2 analog channels with 50 Ω input impedance standard. With real-time sample rate of 1GS/Sec (on both channels), memory depth of up to 28Mpts standard, and waveform capture rate up to 50,000 wfms/sec, the DS2000E provides the raw instrument performance required to meet today’s more advanced debug challenges. When coupled with the large 8 inch WVGA intensity graded display, complete network connectivity, hardware waveform record/playback, serial trigger and decode, and other advanced analysis capabilities, engineers and technicians will see RIGOL has again transformed the price performance assumptions in the Basic Oscilloscope Market.
“The new DS2000E platform extends our legacy of revolutionizing price performance in the test and measurement market,” says Mike Rizzo, General Manager of RIGOL North America. “Customers needing advanced analysis and instrument performance on extremely tight budgets can now get these advanced capabilities without compromising performance or breaking their budget.”
There are lower priced 200MHz Oscilloscopes on the market but budget conscious customers looking for solutions should be careful to choose products that have sufficient sampling capability and signal interpolation algorithms to insure captured signals are properly represented on their instrument. The 200MHz DS2000E provides full 5X oversampling at 200MHz on both channels and is supported with RIGOL’s established UltraVision architecture providing unmatched signal fidelity in this instrument class.
From now until 3/31/2018 RIGOL will provide a free options upgrade with the purchase of any new DS2000E. This bundle includes all Serial Decode (RS232, I2C, SPI, CAN) and Advanced Triggering options. This further extends the transformative price/performance capabilities of the DS2000E and makes it the obvious choice for designers and technicians needing advanced embedded debug capabilities with limited budgets.
More information on the new DS2000E series here.
Electro-Meters is proud to announce we now represent Tabor Electronics!
Today the company’s extensive product portfolio includes signal amplifiers, pulse, function and arbitrary waveform generators, waveform creation software and more, in various platforms, interfaces and frequency ranges. Technologically advanced, featuring the highest levels of performance, reliability, and most of all, price-competitiveness, they are sought-after in a diverse array of applications.
Over the past decade Tabor has extended its global reach. With its headquarters located in Tel Hanan, Israel, Tabor maintains a worldwide distribution network and has become the partner of choice for over 50 major distributors and integrators throughout the globe.
This dynamic company, not content to rest on past accomplishments, is focusing considerable attention and resources to meet the future test and measurement challenges, while continuing to enhance our existing products. A reputation for dedication and dependability has allowed Tabor to become an innovative company often associated with much larger organizations – another reason Tabor is your first choice for a lasting relationship.
For more information about Tabor, please visit their website.
Yokogawa DL350 ScopeCorder offers new features
The DL350 delivers
– The light weight, battery
operation and compact size makes the
DL350 the all-round instrument-of-choice
in the vehicle and in the field.
– The built-in memory
provides long term recording and
transient capture. An SD card provides
long term storage. Advanced triggering
ensures that the data is captured during
the most critical of tests. The DL850 delivers
– Use it like a recorder or an
oscilloscope. The touch screen and
choice of operating modes mean that the
DL350 is as useful for simple maintenance
tasks as it is for advanced measurement
and analysis needs.
A stringent measurement condition
requires a high performance and
flexible solution. This is the design
philosophy of the DL350 ScopeCorder.
With the ability to use the same
18 types of plug-in module as other
ScopeCorders, the battery portable
DL350 is easier to carry and easier to
use in confined spaces.
Offering channel counts up to
8 analog and 16 digital, sample rates
up to 100 MS/s, Isolation up to 1 KV
and resolution up to 16-bit, the range
of modules enables the DL350 to be
configured for a multitude of long and
short term measurement
Rechargeable battery operation can
be used for testing in remote areas or
as a UPS when combined with mains power.
More information on the DL350 ScopeCorder …here.
More information on SMARTDAC+ …here.
AEMC Introduces the NEW Infrared Camera Model 1950
AEMC’s Thermal Imagine IR Camera Model 1950 is equipped with infrared thermography detection technology used in electrical maintenance, metallurgy, steel-making, petroleum, automation, natural gas exploration, transportation and others. See more info here
Welcome Preen Technologies Power Solutions!
Specialized in Power Electronics, Preen AC Power Corp. has been developing products based on the its core technology of Power Conversion. Our product line includes AC Power Source, DC Power Supplies, Power Supplies for Defense Industry, Renewable Energy Simulators, Line Conditioners and UPS.
Welcome APM Technologies Power Solutions to the EM lineup!
APM Technologies (Dongguan) Co., Ltd. is a high-tech enterprise specialized in the research & development (R&D), production and distribution of marine smart system (MSS), PV solar inverter, programmable power supply, automated testing system and automated manufacturing equipment. Our company has complete systems in product planning, research & development, laboratory experiment, testing, and quality control. In addition, we have passed the ISO 9001 standard certifications.
Electro-Meters now represents ITECH Power Testing Solutions
ITECH provides solutions for many of your Power Testing needs including AC and DC power supplies and Loads as well as Power Meters, Battery Testers and Charge/Discharge battery testers.
Canada Revenue Approval for AcuRev 1312! See more info on AcuRev1312 here.
New! Rigol DG1022Z Waveform Generator
RIGOL Technologies, Inc. announces an expansion of their Waveform Generator Portfolio. The new DG1022Z gives budget constrained customers an uncompromised solution with advanced features typically reserved for much higher price points. Now Makers, Educators, and IoT designers working with both electrical and RF applications can build long complex arbitrary waves, generate 8th order harmonics, create advanced modulations and inject random noise. All this at an economical low price!
With 25MHz max sine wave and square wave frequency, 2 full function independent channels, exceptionally long Arb memory length, and 160+ built in waveforms, the RIGOL DG1022Z brings the award winning capabilities of the DG1000Z family down to the value market. Customers with limited budgets will no longer need to work around their equipment’s compromised functionality because the DG1022Z delivers:
- 25MHz Sine/25MHz Square wave frequency
- 2 Full function independent channels
- 8 Order harmonic generator
- AM, FM, PM, ASK, FSK, PSK, and PWM Modulation
- 2Mpts Standard Memory (16M Optional)
- SiFi Sampling Technology for improved Signal Fidelity
- Built in 7 Digit Counter
- +160 Standard Waveforms
Ask us about the new DG1022Z, Rigol’s 25 Mhz addition to the DG1000Z family of Waveform Generators!
Texmate TC PID Controllers
The Texmate TC Series of PID Controllers can be used in a wide variety of precision process control applications including Temperature, Humidity, Pressure, Air-Conditioning, Gas Detection, DC Current, DC Voltage and more. With a wide variety of control, input, output and size options, their versatility is unmatched. Most models offer manual tuning or fuzzy logic auto-tuning of PID parameters and high accuracy at a very reasonable cost.
Megger DLRO 100 Digital Low Resistance Ohmmeter – NEW!
The new Megger DLRO100 series offers a unique range of 100 A digital low resistance testers. Never before has CATIV 600 V safety, operational IP54 ingress protection for dust and water, and lightweight, fast charge, Li-ion battery technology been available on a continuous 100 A low resistance tester.
Providing low resistance measurements across a multitude of applications, including areas without access to line power, the DLRO100 is extremely flexible. Applications include switchgear, circuit breaker contact resistance, bus bar and cable joints, wire and cable resistance, lightning conductor bonding, welded joints, ground connections and joints.
Yokogawa AQ6375B Visible Wavelength Optical Spectrum Analyzer offers new features
The AQ6375B is one of the latest additions to the AQ6370 Series of Optical Spectrum Analyzers. With the ability to provide high speed, accurate analysis of the short wavelength range between 350nm and 1200nm, this OSA is well suited for a broad range of applications. Designed to out-perform in optical measurements taken in visible and NIR (near infrared) regions.
The AQ6375B improves on the AQ6375 model with the added benefits of gas purging input/output ports to reduce water vapor influence and a built-in cut filter to block out high order diffracted light from sources sucha as a 1064nm seed laser.
Yokogawa AQ6373B Visible Wavelength Optical Spectrum Analyzer offers new features
The AQ6373B is one of the latest additions to the AQ6370 Series of Optical Spectrum Analyzers. With the ability to provide high speed, accurate analysis of the short wavelength range between 350nm and 1200nm, this OSA is well suited for a broad range of applications. The AQ6373B can accelerate the development and manufacturing of short wavelength lasers, passive devices and LEDs as well as equipment that uses these devices for the biomedical, material processing, consumer product and telecommunications markets. With built in color analysis capabilities and remote command compatibility with the AQ6315, the AQ6373B provides an upgrade of capabilities, speed and performance for current AQ6315 users.
New Features include a new monochromator with a sharp passband filter edge, a double-speed measuring mode, a multipeak/bottom search function, and a data-logging option. The sharper passband filter edge of the new monochromater helps to more clearly separate spectra signals in close proximity.
Yokogawa Releases WT3000E Precision Power Analyzer
Yokogawa announces its latest Precision Power Analyzer, the Model WT3000E, offering the world’s highest power measurement accuracy of 0.01% of reading + 0.03% of range. This new addition to Yokogawa’s highly recognized digital power analyzer product line offers innovative measurement functions which benefit the engineer with electrical power measurements. It is the ideal measurement solution for testing Product Efficiency, and the design of Inverters, Motor Drives, Lighting Systems, Uninterruptible Power Supplies, Transformer Testing, Aircraft Power Systems, and other power conversion devices.
The WT3000E Precision Power Analyzer is the enhanced model of the existing WT3000. Its power measurement accuracy has been improved and is now considered as the top level in the world. Power electronics technology is being challenged for better energy conservation and improvement in the level of product efficiency. In order to evaluate the energy loss of the latest product designs more precisely, higher accuracy is required for the power measurement instruments. With its cutting-edge performance, the WT3000E satisfies such market needs.
The WT3000E offers two types of Input Elements. The Low Current element provides selectable input ranges of 5, 10, 20, 50, 100, 200 and 500 mA and 1 and 2 Amps. The High Current element provides selectable ranges of 0.5, 1, 2, 5, 10, 20 and 30 Amps. Both offer eight selectable voltage ranges from 15 to 1000 Volts. From one to four input elements can be installed with any combination of Low and High current versions. Measurements of Crest Factors of up to 300 are possible. This is very important in dealing with power electronic circuits. The measurement frequency range is from DC and 0.1Hz to 1MHz.
Many of today’s power conversion circuits use energy saving switching techniques. These can cause highly distorted voltage or current waveforms with high harmonic content. To measure these waveforms accurately, the WT3000E uses high resolution sixteen bit Analog to Digital converters. This will benefit the design and test engineer in product performance evaluation and for power quality conformance testing. The Normal power parameters and Harmonic data are measured simultaneously providing for faster and more accurate power analysis.
Two new measurement functions are provided as standard with the WT3000E. The Delta Calculation function allows users to calculate the individual phase voltages, Line-to-Neutral, from the Line-to-Line voltages measured in a three-phase three-wire system. This function can be very beneficial to the engineer in applications such as motor testing and others where there are no neutral lines. The Cycle by Cycle measurement function enables users to list the measurement parameters of Voltage, Current and Active Power for each cycle in a time series. This is a unique method to capture the fluctuating transient power with high precision.
For Electric Motor testing applications, the WT3000E offers a unique and powerful Motor Evaluation function. In one unit, you can measure all the electrical power parameters along with Rotation Speed, Torque, Mechanical Power, Synchronous Speed, Slip, Motor Efficiency and Total System Efficiency.
For IEC Standards Compliance testing, the WT3000E provides Harmonic measurement in accordance with the latest IEC61000-3-2 and IEC61000-4-7 standards. Voltage Fluctuation and Flicker Measurements can be made in accordance with the latest IEC61000-3-3 and IEC61000-4-15 standards. The Yokogawa Harmonic and Flicker software, 761922, used with the WT3000E provides a complete compliance measurement test system per the IEC standards.
With its large high resolution 8.4 inch TFT LCD display, it is simple to set up and display up to nine different pages of measurement items in formats such as Numeric, Waveforms, Harmonic spectrum Bar Graphs and Trends. In addition a Vector display is available for Voltage and Current phase Analysis.
All the latest communication interface ports such as Ethernet, USB and GPIB, as well as RS232 are available in the WT3000E. Plus, support for USB removable storage media is also available.
Request more info here
Electro-Meters can now supply your Hubodometer needs with Danaher Veeder-Root’s line of quality instruments. Request more info here
Electro-Meters is international!
Now online ordering for Electro-Meters US customers is easier and more convenient than ever!
- Pay securely online with Paypal
- Shipping available to most Canadian and US locations
Order online at webstore.electro-meters.com
. Canadian customers, please continue to order here
New Visible Light Spectrum Analyzer has Higher Performance & New Functions
Yokogawa has introduced a new version of its successful AQ6373 optical spectrum analyzer, incorporating a new monochromator with a steeper passband filter slope, plus a number of new features including a double-speed measuring mode, a multipeak/bottom search function, and a data-logging function.
The new AQ6373B is designed for measurements in the short wavelength region, from 350 nm to 1200 nm, and is based on the same proven platform of the AQ6373, featuring a fast start-up time – about two minutes – and fast measurements, with only 0.5 sec for a measurement covering a 100 nm span. The steeper passband filter slope of the new monochromator is helpful for clearly separating spectral signals in close proximity to one another.
Like the AQ6373, the AQ6373B offers a high resolution of up to 0.01 nm in the 400-470 nm range, a high close-in dynamic range of up to 60 dB, and a high sensitivity down to -80 dBm in the 500-1000 nm range. It also includes a free-space (non-contact) optical input, enabling the instrument to accept optical fibers with core diameters from 9 µm to 800 µm, and a color analysis function for determining the exact color of the input light, as experienced by the average human eye sensitivity (according to the CIE 1931 XYZ standard). Wavelength calibration on the AQ6373B can now be performed using the emission line of a common low-cost xenon lamp to ensure highly accurate results.
The AQ6373B is ideally suited to testing optical devices and systems over the visible spectrum (from 380 to 700 nm) and the first window of optical communications (around 850 nm).
In the visible spectrum, the AQ6373B can be used to test and characterize LEDs used in the lighting, automotive, consumer electronic and signage industries and LASERs used in the optical storage sector (DVD and Blu-Ray disc readers and writers), in medical applications such as ophthalmology, surgery, dental and skin treatment and thermotherapy, in computing devices such as optical mice and barcode readers, and in devices for entertainment including laser shows and games, laser projectors and laser pointers.
In the first window of optical communications, the AQ6373B can be used to test and characterize the laser transmitters emitting around 850 nm (typically VCSELs), which are the most common transmitters installed in the multimode short-distance communications networks over glass or plastic fibers deployed in intra-building communication systems over FTTH networks.
The AQ6373B can also be very useful for the R&D activity associated with new technologies for optical communications based on wireless transmission, including Visible Light Communication (VLC), Light Fidelity (Li-Fi) or Free Space Optical (FSO) communication.
Request more info here
Electro-Meters can now supply your Hubodometer needs with Danaher Veeder-Root’s line of quality instruments. Request more info here
New Electro-Meters Rigol Site !
Rigol Scopes, Waveform Generators, Spectrum Analyzers and More!
See our new sister site and order online here.