- Three-button programming from the front panel
- Three front panel selectable ranges.
- Four-level brightness control of digital display, and setpoint LEDs.
- Three programmable setpoints.
- Relay activation can be selected to occur above (HI) or below (LO) each setpoint.
- Hysteresis setting for all three setpoints. Delay on make and delay on break for SP1 and SP2.
- Peak and Valley. View and Reset.
IIII [+] Read More
- External transmitters or signal conditioners can be eliminated by direct connection of the sensor output to more than 38 Plug-in Input Signal Conditioners that include:
| AC/DC Current
|| 4 to 20 mA
|*See model BL-40PSFH for higher accuracy digitally linearized
thermocouple and RTD
- Optional isolated 16 bit analog output. User or factory scalable to 4 to 20 mA, 0 to 20 mA or 0 to 10 V across any desired digital span from ± one count to the full scale range of – 1999 to 9999 (12000 counts).
- Auto-sensing AC/DC power supply. For voltages between 85-265 V AC / 95-370 V DC (PS1) or 15-48 V AC / 10-72 V DC (PS2).
- 24 V DC excitation is available to power external transmitters and 5 or 10 V DC excitation is available for resistance bridge type sensors such as Load Cells and Pressure Transducers.
- Standard red or optional green or super bright red 4-digit LED with display range –1999 to 9999 (12000 counts).
- Three annunciator LEDs provide front panel alarm status indication for up to three setpoints.
- One 10 Amp Form C and one 5 Amp Form A relay, or up to three 5 Amp Form A relays are available.
- When analog output is installed, one 10 Amp Form C or two 5 Amp Form A relays can be supported.
- Automatic intelligent averaging smooths noisy signals, while providing a fast display response to real level changes.
- More than 38 different
Plug-in I-Series Modular Input Signal Conditioners are approved for Texmate’s Leopard Family of meters.
Texmate’s BL-40PSF series are economically priced, smart programmable relay meter with programmable scale factor and isolated 4 to 20 mA retransmission or control loop output capability for measurement and control applications.
Ideal for OEM applications, more than 38 different Modular Input Signal Conditioners available for flexibility.
n.b. Special meter inputs can be factory scaled.
|Model: Texmate BL-40PSF Series
||4 Digit 0.56” LEDs
||Red, Green or Super Bright Red
|| -1999 to 9999 counts.
||3 red LEDs on front panel; one per setpoint.
||Top segments of digital display flash
||Bottom segments of digital display flash
||±(0.05% of reading + 2 counts)
||100 ppm/°C (Typical)
|Warm up time:
|| 5 conversions per second (Typical)
||A Three 5 Amp Form A relays or one 10 Amp Form C, and one 5 Amp Form A relay.
|Analog Output :
||Isolated 16 bit user scalable mA or V
|OIC (mA out):
||4-20 mA @ 0 to 500Ω max loop resistance
|OIV (volts out):
||0-10 V DC @ 500 Ω or higher resistance
||AC/DC Auto sensing wide range supply
||85-265 VAC / 95-370 VDC @ 2.5W max 3.2W
||15-48 VAC / 10-72 VDC @ 2.5W max 3.2W
||110V or 220V, ±5% at 50Hz; 117V or 230V, ±5% at 60 and 400Hz
||–20 °C to 70 °C
||0 to 60 °C
||1/16 DIN Bezel 96x24mm
Depth behind bezel 122.2mm (4.83") Plus 12.7mm (0.5”) for Right-angled connectors
||7 oz., 9 oz when packed.