• Texmate

BL-B51D40,24x96mm Bargraph Meters

51 segment bargraph with a 4-digit LED digital display for monitoring, measurement and control applications

Features

  • The bargraph can display, full scale, any desired portion of the digital reading.
  • Bargraph center zero function.
  • Four programmable setpoints.
  • Setpoint 1 has delay-on-make and delay-on-break plus a special “pump on pump off” mode that creates a Hysteresis Band between SP1 and SP2.
  • Relay activation can selected to occur above or below (Lo) each setpoint.
  • Digital display blanking.
  • Decimal point setting.
  • Four-level brightness control of the bargraph digital display.

Description

The BL-B51D40 is a 51 segment bargraph with a 4-digit LED digital display for monitoring, measurement and control applications mounted in a 24x96mm case. As a member of the leopard family, the BL-B51D40 can easily be configured simply choosing from over 40 different Plug-in I-Series Input Signal Conditioners.

IIII [+] Read More
  • External transmitters or signal conditioners can be eliminated by direct connection of the sensor output to more than 38 Plug-in Input Signal Conditioners that include:
    AC/DC Current Pressure Resistance
    AC/DC Voltage Process Temperature*
    Load Cell Prototype 4 to 20 mA
  • 24 V DC excitation is available to power external transmitters and 5 or 10 V DC excitation is available for resistance bridge type sensors such as Load Cells and Pressure Transducers.
  • A red, 51 segment high brightness bargraph.
  • Red 4-digit LED display with a range of 1999 to 9999 (12000 counts)
  • Front panel LED annunciators provide indication of setpoint status.
  • Two 10 Amp Form C and two 5 Amp Form A relays available for the BL-B51D40.
  • Auto-sensing AC/DC power supply. For voltages between 85-265 V AC/95-370 V DC (PS1).
  • Provision for external DIM switch to reduce the brightest display setting by 50%.
  • Automatic intelligent averaging smooths noisy signals, while providing a fast display response to real level changes.
  • Literature
  • slider
  • Specifications

Literature and Technical Information

pdf icon

Digital Edgewise Bargraph Meters

BL-B51D40

++ BL-B51-D40 Specifications| Brochure (154 kB)
  • Megger BM5200 Insulation Testers
    Megger BM5200 Insulation Testers
  • Megger MIT400 Series CAT IV Insulation Resistance and Continuity Testers
    Megger MIT400 Series CAT IV Insulation Resistance and Continuity Testers
  • Yokogawa WT310C Power Analyzer
    Yokogawa WT310C Power Analyzer
  • Rigol DS2202A DIgital Oscilloscope
    Rigol DS2202A DIgital Oscilloscope
Model: Texmate BL-B51D40
Display
Display: 4 digit 0.31" Red LED display (std).
Scaling: Customized to any scaling desired, from linear to specialized Cos Ø, square root distributions, with color applications for visual emphasis and to any desired engineering unit.
Specific Accuracies
Accuracy: ±0.05% of reading + 2 counts)
General specifications
Temp. Coeff: 100 ppm/°C (Typical)
Warm up time: 2 minutes
Conversion Rate: 3 to 16 conversions per second
Polarity: Assumed positive. Displays –ve sign
Positive Overrange: Bargraph and top segments of digital display flash.
Negative Overrange First segment of bargraph and bottom segments of digital display flash.
Relay Output: Two 5A Form A relays.
Power Supply: .AC/DC Auto sensing wide range supply 85-265V AC / 95-370V DC@3W
Environment
Operating Temp.: 0 to 60°C
Storage Temp: –20°C to 70°C
Relative Humidity: 95% (non condensing)
Case Dimensions
Case: 1/16 DIN, Bezel: 96x24mm (3.78” x 0.95”)
Case Depth: Depth behind bezel 122.2 mm (4.83"), Plus 12.7mm (0.5”) for Right-angled conn.
Weight: 6.5 oz., 8.5 oz when packed