ITECH

Your Power Testing Solution

IIII [+] About ITECH DC Power Supplies

Multiple DC Power Supply models available including Battery simulation, triple-output and wide range functionality.

 
  • ITECH
  • IT6300 Series
  • IT6400 Series
  • IT6500 Series
  • IT6800 Series
  • IT6100 Series

DC Power Supplies

Triple output, adjustable

III IT6300A/B Triple-output DC Power Supply
ITECH IT6300

IT6300A/B DC Power Supply

    ITECH’S IT6300 Series is a triple output power supply. Presssing the left/right arrow button allows you to adjust the stepping ,which makes it a very convenient tool for your operation. IT6300B has remote measurement function, it can ensure your testing accurately. And built-in RS232,USB,GPIB interface, and each channel can set to serial/ parallel/ track mode, it can bring multi-purpose testing solution to you.

  • Can set to serial/ parallel/ track mode
  • The voltage and current for each channel can be displayed at the same time
  • Small size of 1/2 2U
  • VFD display
  • Function keys with LED light
  • Remote measurement function, compensation online pressure drop
  • High accuracy, high resolution and high stability
  • Limited voltage and over heat protection
  • Intelligent fan control
  • Built-in RS232/USB/GPIB communication interface
  • Low ripple and low noise
  • Can be monitored by computer software
  • Support standard SCPI communication protocol
  • Memory capacity of 36 groups, for save and recall
  • Can adjust the stepping by left/right arrow button
  • Output timer function(0.1~99999.9 seconds)
  • Isolated circuit, support plus and minus reverse
III IT6302 Triple-channel DC Power Supply

IT6302 DC Power Supply

    IT6302 series programmable 3 channel power supply is provided with 1 mV,1mA Series and parallel operating mode can be used to double improve voltage and current output capability. High resolution and high accuracy, ensure your accurate measurement. High-definition VFD display can display and set the voltage of 3 channels at one time without switching. It greatly simplifies the complex operation of traditional 3 channels power supplies.

  • Isolated circuit design – triple output, all are adjustable
  • Can set to serial/ parallel/ track mode
  • The voltage and current for each channel can be displayed at the same time
  • Small size of 1/2 2U
  • VFD display
  • High accuracy, high resolution and high stability
  • Built-in RS232/USB/GPIB communication interface
  • Low ripple and low noise
  • Can be monitored by computer software
  • Support standard SCPI communication protocol
  • Memory capacity of 50 groups, for save and recall
  • Isolated circuit, support plus and minus reverse
III IT6400 Dual-channel Power Supply Battery Simulator
ITECH IT6400 Power Supply

Dual-channel Power Supply, Battery Simulator

 

ITECH’S IT6400 has an ultrafast transient time less than 50μs. Its new designed speed shift mode achieves voltage/current fast rising and without overshoot. Meanwhile, the waveform display function lets the test be visible and simple. IT6412 is dual-channel power supply, channel 1 is for instrument power supply and channel 2 is for battery charging performance test. IT6411 is the single channel type of IT6412 and it can realize all the functions of channel 1.

  • Dual Channel,Bipolar,Dual Range output
  • Accurate Battery Simulation
  • Oscilloscope waveform display (DSO)
  • Dual-channel display on high performance colorful LCD screen
  • Ultrafast transient response time < 50μS
  • Ultrafast voltage rising speed, full load rising time up to 500 μS
  • Current readback resolution up to 100nA
  • Built-in high accuracy DVM
  • Variable output impedance 0-1Ω
  • Applicable to portable battery power supplies test
  • LED test no overcharged current
  • Relay out function achieves electrical isolation on terminals
  • List function achieves voltage/current output as programmed
  • Standard interface LAN/USB/GPIB

itech— Watch the IT6400 Video —

III IT6500 Wide-Range High-Power Power Supply
ITECH IT6500 Power Supply

Wide-Range High-Power Power Supply

 

IT6500C series has 2-quadrant current output ability and seamless switching between two quadrants, which enables it to be suitable for battery fast charging and discharging measurements without sacrificing accuracy. Combined with IT-E501 power dissipater unit, the current sinking capacity of IT6500C can rise up to 100% and the power sinking is up to 300%. Thus it can meet the requirements of higher power discharging test. Even more, it has built-in DIN40839 and ISO-16750-2 standard voltage curve for automobile power net test and I-V curve simulation function for solar panels tests. All the capabilities above make IT6500C to be an ideal solution for continuous source and sink testing needs in power storage applications such as automobile electronics, solar battery, DC motor, batteries etc. IT6500C series can be used as a power supply and an electronic load simultaneously. As a power supply, CV, CC, CP modes are available. As an electronic load, CC and CP mode are available. IT6500C supports up/down speed independently setting in different modes and adjustable up/down time, output impendence setting function. Coordinate with CC / CV priority selection mode, IT6500C is available for fast curves changing without overshoot. At the same time, IT6500C supports multiple power supplies paralleling together in master-slave mode. Even more it can ensure that each power supply equally shares the load current and they all remain in the desired mode. That is a great way to add power flexibility to your test system. What is particularly unusual is that after the expansion of power, IT6500C can still maintain the excellent dynamic characteristics of the single unit to meet the I-V characteristic curve testing demanding a variety of high-power high-speed applications. With user-friendly designed functions, high stability, high setting efficiency and good safety, IT6500C makes high-power test to be simple and stable. As a series of full-featured, high-performance, widely applicable DC power supplies, IT6500 series not only has the power supplies with multi-functional and fast response, featured as IT6500C series, but also it has the power supplies with higher performance and stable output featured as IT6500D series. Its applications include automobile, green energy, high speed testing, high-power testing etc. Users can choose the power supplies according to different testing requirements

  • High Power Single Unit up to 30 kW
  • Wide Range over 100 models
  • Continuous source & sink testing
  • 30kW up/down time < 3ms
  • Fast curve changing without overshoot
  • Maintain excellent performance after paralleling
  • Simple programming from front panel
  • Full protection

itech— Watch the IT6500 Video —

III IT6830A/B Programmable DC Power Supply
ITECH IT6830

IT6830A/B DC Power Supply

 

The IT6800 series of DC power supplies are programmable and with single channel output. With a resolution of 1mV/0.1mA, you can adjust the voltage/current stepping by pressing the left and right keys to moving the cursor and programs by the front panel. OVP/OTP protection. The IT6800 supports timer function and their built-in RS232 and USB communication interfaces offer you a convenience testing experience.

  • Convenient data entry via knob or numerical keypad
  • High accuracy and resolution 1mV/0.1mA
  • Remote sense
  • Lower ripple and noise
  • List and timer function
  • OVP/OTP protection
III IT6860A/B Dual-Range Power Supply
ITECH 6860 DC Power Supplies

IT6860A/B DC Power Supply

  • Convenient data entry via knob or numerical keypad
  • High accuracy and resolution 1mV/0.1mA
  • Remote sense
  • Lower ripple and noise
  • List and timer function
  • OVP/OTP protection

DC Power Supplies

Triple output, adjustable

III IT6120B High Accuracy DC Power Supply
ITECH IT6100B

IT6100B Programmable DC Power Supply

 

ITECH’s IT6100B Series has fast voltage rise speed and very high accuracy and resolution. Also configured with standard RS232/USB/GPIB interface to realize fast communication speed. List configure can operated on front panel. This series offers a flexible solution to general laboratory and workshop requirements.

  • Luminiferous LED key
  • Memory capacity: 100 groups
  • High accuracy and resolution of 0.1mV /0.1mA
  • List mode
  • Timer function (0.01~60000S)
  • High voltage rise speed (<20mS)
  • Remote sense interface to compensate line voltage
  • Built-in 5½ digital voltmeter
  • Built-in RS232/USB/GPIB interface and supports SCPI protocol
  • OVP, voltage/current limiting protection
  • Free software with strong functions, saving secondary development time
III IT6100 Programmable DC Power Supply
IT6100

IT6100 Programmable DC Power Supply

  • Linear Programmable Power Supplyu
  • Higlight screen VFD display
  • Low ripple and low noise
  • High accuracy and resolution
  • List mode
  • Fast transient response time (<150 μs)
  • Built-in 5½ digital voltmeter
  • Optional RS232/USB/GPIB interface