Superior Electric

Power Quality Solutions

IIII [+] About Superior Electric

Manufacturers of Voltage Control and Conditioning Equipment

 
  • Power Quality Solutions
  • Power Conditioners
  • Transient Voltage Surge
  • Stabiline UPS
  • Variable Transformers
  • Auto Voltage Regulator
III Superior PPC Series
superior

Ferroresonant Power Conditioners

Protects all types of loads including nonlinear switch-mode power supplies. They use advanced ferroresonant technology with energy storage capability to block and attenuate voltage spikes and transients originating from the input generating or the output-consuming power source. Models also provide regulate line voltage to compensate for surges and brownouts. Corrects problems caused by poor factor, line distortion and overheating of neutral line conductors.

III Superior CS1 Series
superior

Transient Voltage Surge Suppressors

The Superior Electric model CS1, is a premier transient voltage surge suppressor that produces clean regulated power source. It safe guards your electronics from lighting strikes, line disturbances and uneven loads that cause disabling transients, spikes, sags and surges. Left unregulated, these conditions will degrade – even destroy – sensitive broadcast electronics in receiving stations, studios, mobile production vehicles and transmitter sites. Avoid catastrophic equipment failure, software damage and poor signal quality with STABILINE® TVSS

III Superior DIN1 Series
superior

Transient Voltage Surge Suppressors

DIN1 Series Transient Voltage Surge Suppressors deliver worry- free performance with an innovative and proven technology design. All models provide surge and sag protection against harmful transient voltages and high-frequency noise that exceed the nominal operating voltage of AC and DC critical dedicated control loads. Ideal for protecting PLCs, fire-alarm panels, motion control systems, electric access readers, POS hardware, building management systems and other microprocessor based loads. The DIN1 Series unit is installed/connected in either Series or Parallel with the line and the equipment to be protected.

III Superior DIN1 Plus Series
superior

Transient Voltage Surge Suppressors

DIN1 PLUS transient voltage surge suppressors deliver worry-free performance with an innovative and proven technology design. All models provide surge protection against harmful transient voltage and high-frequency noise that exceed the nominal operating voltage of AC and DC critical dedicated loads.DIN1 PLUS Series units respond reliably and repeatedly in less than 1 nanosecond. The fail-safe design incorporates thermal fuse links and TMOVs, and dual Component-Level Fusing (CLF) are standard in each unit. space

III Superior DIN2R-40 Plus Series
superior

Transient Voltage Surge Suppressors

DIN2R-40 Series STABILINE Transient Voltage Surge Suppressors are single pole, parallel-connected, MOV technology Class II, Category B Surge Protective Devices suitable for use in AC electrical power systems for protection against surge and transient activity. Each protector provides 40 kA Surge Amp Capacity protection in maintenance free, low profile, IP20 enclosure, DIN Rail mountable module. space

III Superior DIN3 Series
superior

Transient Voltage Surge Suppressors

DIN3 Series STABILINE Transient Voltage Surge Suppressors are single pole, parallel and/or “in-line” connected, MOV technology Class I, Category C Surge Protective Devices suitable for use in AC electrical power systems for protection against surge and transient activity. DIN3 Series protectors provide 70, 100 or 165 kA Surge Amp Capacity in a maintenance free, low profile, DIN Rail mountable module. All line voltage protectors (L-In / L-Out) can also be connected “in-line” and provide for 50A maximum continuous operating current protection. space

III Superior PT1 Series
superior

Transient Voltage Surge Suppressors

Superior Electric model PTI transient voltage surge suppressors safeguard your electronics from lightning, line disturbances such as spikes, sags and surges, providing you with a clean and stable power source. PT1 Series STABILINE® deliver worry-free performance with an innovative and proven technology design. The tested single-pulse surge current capacity (per mode) meets NEMA recommendations. Sand-packed MOV arrays equally share current to suppress transients before they reach sensitive loads while capacitors filter out high frequency noise and low-level transients.

III Superior PT2 Series
superior

Transient Voltage Surge Suppressors

The PT2 transient voltage surge suppressors (TVSS) series provide protection from surges up to 40kA and are available in 1 and 3 phase models. PT2 Series are housed in a compact, plastic, hermetically sealed housing that ensures weatherproof protection for outdoor and indoor installations. Color-coded wiring conforms to US and International standards and convenient pigtail design makes installation flexible and easy. Thermal disconnects and fusing for each MOV plus a sand-filled enclosure permit benign end-of-life mode during sustained line overvoltage conditions, thus eliminating smoke and fire damage to adjacent equipment.

III Superior TB1 Series
superior

Transient Voltage Surge Suppressors

The TB1 Series STABILINE® Transient Voltage Surge Suppressor is engineered for hard-wired installation within or adjacent to electrical loads such as programmable logic controllers, motion controllers, robotics, motors, adjustable speed drives, process automation systems, pumps, heaters, HVAC systems and other point-of-use applications. Compact and powerful, the TB1 Series unit protects these and other individual components from damaging electrical transients, high frequency noise and high-energy disturbances.

III Superior SEG Series
superior

2 kva – 6 kva, True On-Line UPS

The Superior Electric SEG series UPS is a high efficiency uninterrupted power supply (UPS). A true Regenerative On-Line design that provides the highest level of protection against a broader spectrum of Power Problems. This is accomplished through converting the incoming AC utility voltage to a regulated DC voltage. From this DC voltage, a new AC voltage is regenerated by the UPS (Uninterrupted Power Supply), providing a clean sine wave and tightly regulated source to connected equipment. Offered in 120 and 230 VAC, Cabinet from 1kVA to 6kVA ratings

III Superior SEG Rack Series
superior

True On-Line Rack-Mount UPS

The Superior Electric rack-mount SEG UPS series is a high efficiency uninterrupted power supply (UPS). A True Regenerative On-Line technology provides the highest level of protection against a broader spectrum of Power Problems. This is accomplished through converting the incoming AC utility voltage to a regulated DC voltage. From this DC voltage, a new AC voltage is regenerated by the UPS, providing a clean sine wave and tightly regulated source to connected equipment. Offered in 120 and 230 VAC, 19-inch Rack Mount, from 1kVA to 6kVA ratings.

III Superior SLF Series
superior

Uninterruptible Power Supply

The Superior Electric SLF UPS Series advances the price/performance standard for Line Interactive technology. A SLF Series unit is an ideal power quality solution for Mission-critical applications. Units safeguard file servers, workstations, networking hubs, routers, switches, POS hardware, back office systems, ATMs and telecommunications equipment from blackouts,brownouts,voltage fluctuations and transient voltage surges. True Sine Wave Output Unlike many other Line Interactive UPS on the market today, the SLF Series UPS produces a true sine wave output voltage waveform, just like the incoming utility power.

III Superior SLI Series
superior

120V Uninterruptible Power Supply

Increase productivity and your bottom line! The SLI UPS acts as a defensive barrier between your equipment and corrupted power, thereby eliminating premature hardware failure, data loss and error, storage loss and system/keyboard lockup. All SLI Series units incorporate load segment capabilities which enable scheduled shutdowns and load shedding as well as maximum run time for each critical device. To preserve battery power for more critical equipment connected to the UPS, shut down and power up load segments are user-defined.

III Superior SLI Rack Series
superior

120V Uninterruptible Power Supply

The SLI UPS series incorporates load segment capabilities (separate receptacle groups) which enable scheduled shutdowns and load shedding as well as maximum run time for each critical device. To preserve battery power for more critical equipment connected to the UPS, shut down and power up load segments are user-defined. Feature rich communications and UPS power management software provide extensive control and monitoring.All SLI UPS feature advanced battery management technology, which doubles battery service life, critical to maximizing system availability.

III Superior SLI 230 Volt Series
superior

230V Uninterruptible Power Supply

SLI Series STABILINE Uninterruptible Power Supplies provide advanced power management for PC’s, workstations and servers.All SLI Series incorporate load segment capabilities (separate receptacle groups) which enable scheduled shutdowns and load shedding as well as maximum run time for each critical device. To preserve battery power for more critical equipment connected to the UPS, shut down and power up load segments are user-defined. Feature rich communications and UPS power management software provide extensive control and monitoring.

III Superior SLI 230 Volt Rack Series
superior

230V Rack-Mount Uninterruptible Power Supply

SLI Series STABILINE Uninterruptible Power Supply provide advanced power management for PC’s, workstations and servers. All SLI Series units incorporate load segment capabilities (separate receptacle groups) which enable scheduled shutdowns and load shedding as well as maximum run time for each critical device. To preserve battery power for more critical equipment connected to the UPS, shut down and power up load segments are user-defined. Feature rich communications and UPS power management software provide extensive control and monitoring. All feature advanced battery management technology, which doubles battery service life, critical to maximizing system availability.

III Superior 10B & 10C Series
superior

Continuously adjustable variable transformers

The 10B & 10C are continuously adjustable variable transformers with movable brushes and taps mounted on a commutator to vary the voltage output.The voltage Dial is graduated in decades up to 100, outputting voltages between 0 to 120 VAC or with the boost connection to a maximum voltage of 132 VAC.The 10B and 10C minimal wave distortion make these powerstats ideal for OEM, testing and in-panel applications. The 10 series is available in a 1, 2 or 3Ø configurations, and are rated at 2.25A for constant current loads, and at 3 amps for constant impedance loads such as incandescent lamps or resistance heaters etc., voltage is drawn nearly proportionally to applied voltage. space

III Superior WHR Series
superior

Automatic Voltage Regulators

WHR Series maintain constant voltage, even when the input voltage and system load vary widely. All electronic and electrical equipment is designed to operate at a particular nominal voltage. WHR Series are a cost effective due to their modular construction providing a wide variety of regulators, standardized power modules, control modules, enclosures and optional equipment. space