• RIGOL

DS1000D Mixed Signal Oscilloscopes

Up to 100Mhz bandwidth, up to 1GSa/s sample rate, deep memory
(up to 1 Mpts)

Rigol DS1000D Mixed Signal Oscilloscope Series
cart Order online ►► | DS1102D | DS1052D |

Features

  • Dual analog channels + 16 channels logic analyzer
  • 100MHz bandwidth
  • 1GSa/s maximum real-time Sample rate
  • 25GSa/s maximum equivalent Sample rate
  • Trigger types: Edge, Pulse Width, Video, Slope, Alternate, Pattern and Duration
  • Unique adjustable trigger sensitivity
  • Measures up to 20 wave parameters and track measurements automatically
  • Unique waveform record and replay
  • IIII [+] Read More
    • Fine delayed scan function
    • Built-in FFT function
    • Pass/Fail detection function enables to output testing results
    • Math can be aqpplied to multiple waves
    • Powerful PC application software- UltraScope
    • Standard configuration interface: USB Device, USB Host , RS-232 and support U disk storage and PictBridge print standards
    • The new “Key Lock” function
    • Support for remote command control

Description

DS1000D series are the high-performance, economic mixed-signals digital oscilloscopes. It’s 2 analog channels plus 16 logic channels makes mixed signal debug easier.
  • Literature
  • Specifications
Literature and Technical Information
pdf icon

Mixed Signal Oscilloscopes

++ DS1000D Series Specification Brochure | 381 kB
++ DS1000D User’s Guide| 3.5 MB
++ DS1000D Quick Guide| 188 kB
Model: DS1000D Oscilloscope Series
 
Display: 145mm (5.6 inch) diagonal TFT Liquid Crystal Display
Display Resolution: 320 horizontal ×RGB×234 vertical pixels
Display Color: 64k color
LED backlight source technology enable the wave displays more vivid with lower power dissipation and longer life
Models
  D1000B Series D1000B Series
  DS1102D DS1052D
Bandwidth: 100 MHz 50 MHz
Analog Channels: 2 2
Logic Channels: 16 16
Max. Sample Rate: 2 GSa/s(half channel), 1 GSa/s(each channel)
  Capture rate Common Long memory
Memory -one channel: 1 GSa/s 16 kpts N/A
500 MSa/s 16 kpts 1 Mpts
Memory -dual channel: 500 MSa/s
8 kpts
N/A
250 MSa/s or less 8 kpts 512 kpts
Sample
Equivalent Time Sample Rate: 25GSa/s 10GSa/s
Rise Time: <3.5ns, <7ns, respectively at 100MHz, 50MHz
Input
Sample Rate Range: DC, AC or GND
Input Impedance: 1MΩ±2%, the input capacity is 18pF±3pF
Probe: 1X, 5X, 10X, 50X, 100X, 500X,1000X
Maximum Input Voltage: 400V (DC+AC Peak, 1MΩ input impedance)
40V (DC+AC Peak)
Time Delay between Channels: 500ps
Trigger modes: Edge, Video, Pulse Width,Slope, Alternate, pattern and Duration trigger across 2 analog channels
Horizontal
Timebase Scale: Real-Time: 13.65Sa/s-1GSa/s
Equivalent: 13.65Sa/s-25GSa/s
Waveform Interpolation: Sin(x)/x
Memory Depth: 16k samples when horizontal timebase is 20ns/div or lower and 8k samples when horizontal timebase is 50ns/div or higher for half channel[1] 8k samples for each channel
Scanning Speed Range (Sec/div): 2ns/div~50s/div, DS1102X
5ns/div~50s/div, DS1052X
1-2-5 Sequence
Sample Rate and
Delay Time Accuracy:
±50ppm (any interval ≥1ms)
Delta Time
Measurement Accuracy
(Full Bandwidth)
Single: ±(1 Sample interval + 50ppm × reading + 0.6 ns)
>16 averages: ±(1Sample interval + 50ppm × reading + 0.4 ns)
Vertical
Vertical Resolution: 8-bit resolution, all channels sample simultaneously
Bandwidth (-3dB) ≤5Hz (at input BNC)
Vertical Scale: 2mV/div-10V/div at input BNC
Offset Range; ±40V(245mV/div~10V/div)
±2V(2mV/div~245mV/div)
Bandwidth Limit: 20MHz
DC Gain Accuracy: 2mV/div~5mV/div: ±4% (Normal or Average acquisition mode)
10mV/div~10V/div: ±3% (Normal or Average acquisition mode)
DC Measurement
Accuracy Average
Acquisition Mode:
When vertical displacement is zero, and N ≥16:
±(DC Gain Accuracy×reading+0.1div+1mV)
When vertical displacement is not zero, and N ≥16:
±[DC Gain Accuracy×(reading+ vertical position)+(1% of vertical position)+0.2div] Add 2mV for settings from 1mV/div to 200 mV/div
Add 50mV for settings from >200mV/div to 10V/div
Math
Functions +, -, ×, FFT
Auto Measure Vpp, Vamp, Vmax, Vmin, Vtop, Vbase, Vavg, Vrms, Overshoot, Preshoot, Freq, Period, Rise Time, Fall Time, +Width, -Width, +Duty, -Duty, Delay A→B, Delay A→B,Phase A→B,Phase A→B
Specifications
Power Voltage: AC, 100~240 V, 45~440Hz, CAT II
Power Consumption: Less than 50VA
Temperature Range: Operating 10℃~ 40℃
Non-operating -20℃~ +60℃
Humidity Range: +35℃ or below: ≤90% relative humidity
+35℃~ +40℃: ≤60% relative humidity
Dimensions: 325 mm× 159 mm × 133 mm
Weight: Package Excluded – 3kg
Package Included – 4.3 kg
Safety: IP2X