• RIGOL

DP712 Programmable, Linear Power Supply
Single output, 50 V/5 A, total power up to 150 W

High accuracy- Voltage (0.05% + 20 mV) , Current (0.2% + 10 mA), Excellent Load and Line Regulation, Clean power with Low ripple noise

cart Order Online ►► | DP712  |

Features

  • Single output, 30 V/5 A , total power up to 150 W
  • Low ripple and noise: <500 μVrms/4 mVpp; <2 mArms
  • Excellent load and line regulation rate: <0.01% + 2 mV; <0.01% + 2 mA
  • Transient response time: <50 μs 1 mV/1 mA resolution (optional)
  • External trigger function supported, enabling synchronous output for multiple devices (optional)
  • Timing option supports sweeps with minimum 10 ms dwell time
  • 3.5-inch TFT-LCD
  • IIII [+] Read More
    • 1 mV/1 mA resolution (optional)
    • Sound overvoltage/overcurrent/overtemperature protection, with the response time for the overvoltage protection less than 10 ms
    • Front panel locking and any specified key locking supported
    • RS232 interface communication supported

Applications

  • R&D Iab General purpose testing
  • Automotive electronic test
  • Quality Assessment inspection
  • Pure power for RF (radio frequency)/MW (microwave) circuits or components
  • Bias power for RF/MW circuits
  • Device or circuit characterization and troubleshooting

Description

RIGOL’s DP700 series is an affordable programmable linear DC power supply for benchtop applications. Wit h quality performance specifications, reliable output, and a small footprint, the DP700 series provides incredible benchtop value. DP700 series supports timing output and trigger function, and provides a remote communication interface, enabling you to meet your diversified test requirements.
  • Literature
  • Specifications
Model: DP712  Programmable Power Supplies
Display: 3.5 Inch TFT Display
Load Regulation ± (output percentage + offset)
Voltage: < 0.01% + 2 mV
Current: <0.01% + 2 mA
Line Regulation ± (output percentage + offset)
Voltage: < 0.01% + 2 mV
Current: <0.01% + 2 mA
Ripple and Noise (20 Hz – 20 MHz)
Normal Mode Voltage: <500 μVrms/3 mVpp
Normal Mode Current: < 2 mA rms
Temperature Coefficient per ℃ (output percentage + offset)
Voltage: 0.01% + 2 mV
Current: 0.02% + 3 mA
Stability, ±(output percentage + offset)
Voltage: 0.02% + 2 mV
Current: 0.1% + 3 mA
OVP/OCP
Accuracy: 0.01 V to 55 V/0.01 A to 3.3 A
Activation Time: <10 ms (OVP>1 V)
Temperature Coefficient[4], ±(% of Output + Offset)
Voltage: 0.01% + 2 mV
Current: 0.02% + 3 mA
Resolution
Programming
Voltage: 10mV With high-resolution option: 1mV
Current: 10 mA with high resolution option installed: 1 mA
Read Back
Voltage: 10mV With high-resolution option: 1mV
Current: 10 mA with high resolution option installed: 1 mA
Display
Voltage: 10mV With high-resolution option: 1mV
Current: 10 mA with high resolution option installed: 1 mA
Accuracy 12 Months (25℃±5℃)±(output percentage + offset)
Programming
Voltage: 0.05% + 20 mV
Current: 0.2% + 10 mA
Read Back
Voltage: 0.05% + 20 mV
Current: 0.2% + 20 mA
Voltage Programming Control Speed (1% within the total variation range)
Rising
Full Load: 150 ms
No Load: 100 ms
Specifications
Power Voltage: 100 Vac ± 10%, 120 Vac ± 10%, 220 Vac ± 10%, and 240 Vac ± 10% (max: 253 Vac)
Maximum Input Power: 400 VA
Temperature Range: 0°C to 40°C for full rated output, 5% to 80% RH
Storage Range: -40°C to 70°C, 5% to 80% RH
Interface Ports: RS232
Dimensions: 140 mm (W) x 202mm (H) x 332 mm (D)
Weight: Net weight: 6.9 kg