Rigol Technologies inc.
IIII [+] About Rigol
RIGOL is committed to providing innovative test and measurement solutions with exceptional value and category-leading performance to help engineers reduce the time on design and debugging, drive the cost down and accelerate time to market.
- Rigol Technology
T&M leader and a technology innovator in Electronic Measurement
Rigol Products
- Scopes
- Generators
- Spectrum Analyzers
- Bench DMMs
- Electronic Loads
- Power Supplies
- Data Acquisition
- Digital Oscilloscopes
- Mixed Signal Oscilloscopes
Digital Oscilloscopes
Rigol provides a full line of oscilloscopes to meet your lab, production and maintenance requirements
DS6000 Digital Oscilloscope Series (DSO)
- Up to 1 GHz BW with 5 GSa/s sample rate
- Standard 140 Mpts deep memory
- Up to 180,000 waveforms per second capture rate
- Up to 200,000 frames for waveform record and replay
— DS6000 Demo Video Part 1 —
— DS6000 Demo Video Part 2 —
— DS6000 Demo Video Part 3 —
DS4000 Digital Oscilloscope Series (DSO)
- Bandwidth 500MHz, 350MHz,200MHz,100MHz
- Sample Rate Analog channel up to 4 GSa/s
- Standard Memory depth: Analog channel up to 140 Mpts
— DS4000 Digital Oscilloscope —
DS2000A Digital Oscilloscope Series (DSO)
- Bandwidth up to 300MHz,standard with 50Ω input
- Max. Sample Rate: Analog channel up to 2G Sa/s
- Memory Depth :Analog channel up to14Mpts /56Mpts(Opt.)
DS1000Z Digital Oscilloscope Series (DSO)
- 4 Analog channel Bandwidth: 100MHz,70MHz
- Max. Sample Rate up to 1GSa/s
- Memory Depth up to12Mpts /24Mpts(Opt.)
— DS1000Z Video —
DS1000B Digital Oscilloscope Series (DSO)
- 4 Analog channel Bandwidth: 200MHz
- 2GSa/s real-time sample rate (50 GSa/s equivalent time sample rate)
- Waveform storage, set up storage, 8-bit maps, 24-bit bitmap, PNG storage, CSV storage
Digital Oscilloscopes
Rigol provides a full line of oscilloscopes to meet your requirements from Laboratory to Production
MSO4000 Mixed Signal Oscilloscope Series
- Bandwidth 500MHz, 350MHz,200MHz,100MHz
- Sample Rate Analog Ch. up to 4 GSa/s; 1 GSa/sec (digital)
- 140 Mpts memory (analog), 28 Mpts memory (digital)
- 110,000 Waveforms /s; 85,000 Wfms/sec (digital)
MSO2000A Mixed Signal Oscilloscope Series
- Bandwidth up to 300MHz,standard with 50Ω input
- 16 bit digital inputs for mixed signal applications with 1 GSa/s sampling
- Max. Sample Rate: Analog channel up to 2GSa/s
- Memory Depth :Analog channel up to14Mpts /56Mpts(Opt.)
DS1000D Mixed Signal Oscilloscope Series
- 2 Analog channel Bandwidth: 100MHz
- 16 channels logic analyzer, mixed test, pattern cursor test and data memory.
- 1GSa/s real-time sample rate (25 GSa/s equivalent time sample rate)
DS1000E Mixed Signal Oscilloscope Series
- 2 Analog channel Bandwidth: 100MHz
- Max. Sample Rate up to 1G Sa/s real-time sample rate and 25GSa/s equivalent time sample rate
- Trigger modes: edge, pulse width, slope, video, alternate trigger
— DS1000E Demo Video Part 1 —
— DS1000E Demo Video Part 2 —
MSO1000Z Mixed Signal Oscilloscope Series
- 4 Analog channel Bandwidth: 100MHz,70MHz
- 16 digital channels for Mixed Signal analysis
- Max. Sample Rate up to 1GSa/s
- Memory Depth up to12Mpts /24Mpts(Opt.)
- Waveform Generators
- RF Signal Generators
Waveform Generators
Rigol provides a full line of waveform generators to meet your laboratory, R&D and maintenance needs.
DG5000 Waveform Generators
- Generators up to 350 MHz
- 1 GSa/Sec waveform output
- 14 bit vertical resolution
- 128 Million Points of Arbitrary Waveform Memory
DG4000 Waveform Generators
- Generators up to 160 MHz
- 2 output channel
- 500 MSa/s sample rate
- 130 built-in waveforms
— DG4000 Video —
DG1000Z Waveform Generators
- Up to 200 MSa/s Sample Rate
- 14 bits vertical resolution
- 8 Mpts standard; 16 Mpts optional Memory Depth
- Up to 160 built-in waveforms
DG1000 Waveform Generators
- Generators up to 25 MHz (5 MHz max square wave)
- 2 output channels
- Advanced Direct Digital Synthesis(DDS) technology
RF Signal Generators
DSG3000 series offers standard AM/FM/ØM analog modulation, as well as options for I/Q modulation and I/Q baseband output.
DSG3030 3GHz RF Signal Generator
- 3 GHz / 6 GHz versions available
- Optional I/Q modulation and I/Q baseband outputs
- USB/LAN/GPIB interfaces standard. Supports LXI-C and SCPI command set
- AM/FM/øM modulation standard. Standard pulse modulation
DSG3060 6GHz RF Signal Generator
- 3 GHz / 6 GHz versions available
- Optional I/Q modulation and I/Q baseband outputs
- USB/LAN/GPIB interfaces standard. Supports LXI-C and SCPI command set
- AM/FM/øM modulation standard. Standard pulse modulation
Spectrum Analyzers
Rigol’s compact design and easy-to-use interface, make it ideal for RF and wireless testing and production
DSA815 Spectrum Analyzers
- 9 kHz to 1.5 GHz Frequency Range
- Typical -135 dBm Displayed Average Noise Level (DANL)
- -80 dBc/Hz @10 kHz offset Phase Noise
- Total Amplitude Uncertainty <1.5 dB
- Tracking Generator Model available
— DSA815 Intro Video Part 1 —
— DSA815 Intro Video Part 2 —
DSA832 Spectrum Analyzers
- 9 kHz to 3.2 GHz Frequency Range
- Typical -161 dBm Displayed Average Noise Level (DANL)
- -98 dBc/Hz @10 kHz offset Phase Noise
- Total Amplitude Uncertainty <0.8 dBs
- Tracking Generator Model available
DSA875 Spectrum Analyzers
- 9 kHz to 7.5 GHz Frequency Range
- Typical -161 dBm Displayed Average Noise Level (DANL)
- -98 dBc/Hz @10 kHz offset Phase Noise
- Total Amplitude Uncertainty <0.8 dB
- Tracking Generator Model available
-T.jpg "Rigol DSA1030 Spectrum Analyzer Series")
DG1000 Waveform Generators
- 3 GHz Bandwidth
- All digital IF Design
- 100 Hz Minimum Resolution Bandwidth
- Preamp and/or Tracking Generator Models available
DG1000A Waveform Generators
- 3 GHz Bandwidth
- All digital IF Design
- 100 Hz Minimum Resolution Bandwidth
- Preamp and/or Tracking Generator Models available
DSA705 Spectrum Analyzers
- Focus on measurements below 500 GHz
- Digital IF Filter
- Monitor FSK signals
- Differentiate between signal with 100 HZ separation
DSA710 Spectrum Analyzers
- Focus on measurements below 1 GHz
- Digital IF Filter
- Monitor FSK signals
- Differentiate between signal with 100 HZ separation
Digital Multimeters
Designed with multi-functions, high-precision, high performance and automatic measurements and support any type of sensors and complete interfaces.
DM3068 Digital Multimeter
c/w LAN, GPIB, Remote Interface
- Real 6 ½ digits readings resolution (2,200,000 Count)
- True-RMS AC Voltage and Current measurement
- 13 measurement functions : AC and DC Voltage and Current ,2-wire Resistance,4-wire Resistance, CAP, Diode, Connectivity, Frequency, Period, Any sensor,Temperature
DM3058 Digital Multimeter
c/w LAN, GPIB, Remote Interface
- Real 5 ½ digits readings resolution
- True-RMS AC Voltage and Current measurement
- 13 measurement functions : AC and DC Voltage and Current ,2-wire Resistance,4-wire Resistance, CAP, Diode, Connectivity, Frequency, Period, Any sensor,Temperature
DM3058E Digital Multimeter Series
- Real 5 ½ digits readings resolution
- True-RMS AC Voltage and Current measurement
- 13 measurement functions : AC and DC Voltage and Current ,2-wire Resistance,4-wire Resistance, CAP, Diode, Connectivity, Frequency, Period, Any sensor,Temperature
|
 |
| DC Programmable Power Supplies | |
- DL3000 Series
DC Electronic Loads
Cost-effective, high-performance programmable DC electronic load.
DC Electronic Load
- Dynamic mode up to 30 KHz
- Adjustable current rising speed: 0.001 A/μs to 5 A/μs
- Min. readback resolution: 0.1 mV ， 0.1 mA
- 4.3-inch TFT LCD, capable of displaying multiple parameters and states simultaneously
— Watch the DL3000 Video —
DC Electronic Load
- Dynamic mode up to 30 KHz
- Adjustable current rising speed: 0.001 A/μs to 5 A/μs
- Min. readback resolution: 0.1 mV ， 0.1 mA
- 4.3-inch TFT LCD, capable of displaying multiple parameters and states simultaneously
— Watch the DL3000 Video —
- DP800 Series
- DP1000 Series
DC Power Supplies
1 to 3 Output, High accuracy, Excellent Load and Line Regulation and Clean power with Low ripple noise
DP811A Single-Output, Dual-Range, 200 wattDC Power Supply
- 2 Ranges; total power up to 200W
- Low Ripple Noise <350 uVrms/2mVpp
- Fast transient response time: <50 us
- Up to 10A or 40 V
DP821A Programmable, Dual output, 140W DC Power Supply
- 2 Outputs; total power up to 140W
- Low Ripple Noise <350 uVrms/2mVpp
- Fast transient response time: <50 us
- Up to 10A or 60 V
DP831A DC Power Supply Programmable, Triple output and 160W DC
- 3 Outputs; total power up to 160W
- Low Ripple Noise <350 uVrms/2mVpp
- Fast transient response time: <50 us
- Channel isolation: CH1 || CH2,CH3
DP832 Programmable, Triple output, 195W DC Power Supply
- 3 Outputs; total power up to 195W
- Low Ripple Noise <350 uVrms/2mVpp
- Fast transient response time: <50 us
- Channel isolation: CH1 || CH2,CH3
DP832A Programmable, Triple output, 195W DC Power Supply
- 3 Outputs; total power up to 195W
- Low Ripple Noise <350 uVrms/2mVpp
- Fast transient response time: <50 us
- Channel isolation: CH1 || CH2,CH3
DP1116A DC Power Supply
- Single Channel, 160 Watt Power Supply
- Linear Power Supply design for improved performance
- Full color display with real time Volts, Amps, and Watts readout
- Wave Track monitors outputs over time
DP1308A Triple Output, 80 Watt DC Power Supply
- Linear Power Supply design for improved performance
- Color display with real time Volts, Amps and Watts readout
- Wave Track monitors outputs over time
- GPIB, LXI-C (Ethernet), USB host & device interfaces
Data Acquisition Mainframes with DMM Capability
Data acquisition and switch systems provide accurate, repeatable measurements for general purpose temperature, resistance, and voltage scanning
M300 Data Acquisition Mainframe
- Up to 320 switch channels per mainframe
- Integrated DMM scanning of up to 256 channels
- Interval scanning with storage of up to 100,000 readings
- 8 different available modules including MC3065 6.5 DMM module
M301 Data Acquisition Mainframe with DMM Module
- Up to 320 switch channels per mainframe
- Integrated DMM scanning of up to 256 channels
- Interval scanning with storage of up to 100,000 readings
- 8 different available modules c/w MC3065 6.5 DMM module