Monarch Nova Strobe PB+ Series Digital Stroboscopes

space
DA_DB Nova Strobe
space
Characteristics:
  • Flash rates from 30 to 32,500 flashes per minute, adjustable in 0.05 step increments, to 3000 fpm and 0.5 step increments to 32,500. The all digital, crystal controlled microprocessor keeps readings rock steady.
  • PB 115 Kit (shown right) includes carry case and spare lamp
  • Times 2 and divide by 2 push buttons allow easy checking for RPM harmonics and allow stop motion far beyond the 32,500 fpm limit.
  • Store and recall up to 3 user selectable values. Last measurement memory, even with the power off.
  • Individual in and output TTL jacks for provides power to remotes sensors and allows “daisy chaining” multiple strobes. A Tachometer mode allows accurate speed measurement up to 200,000 RPM using external sensors.
  • Dual-function delays in external mode. Delays adjustable as phase angle or time with resolution to 0.1 degree and 0.0001 seconds.
  • Auto step mode provides slow motion appearance for high speed repetitive event.
  • Backlit alphanumeric LCD display shows flash rate in flashes per second or flashes per minute and delays in degrees or milliseconds.
  • NIST Certificate of Calibration included.
Product Description:
space
The Vibration-Strobe Kit has an operating range of 100 to 12,000 flashes per minute. It also has true external Phase Shifting throughout the complete operating range. The Vibration-Strobe operates with internal rechargeable batteries. This unit has a unique “tracking filter” ideal for vibration analysis. It has proven compatibility with numerous vibration data collectors. The Vibration-Strobe will accept the input from your data collector and provide a TTL output to the external input of your data collector. This will provide a strobe-firing from the accelerometer. If you require slow-motion studies, balancing, relative phase analysis or synchronous time averaging, this strobe is ideally suited for your application.
space
Specifications :
space
Specifications Phaser-Strobe PB    CE
Flash Range 30-32,500 FPM (Flashes per Minute) (RPM) 0.5-533.33 FPS (Flashes per Second) (Hz)
Accuracy ±0.01% of reading
Digital Adjustment Knob (All ranges and modes) 32 detents per revolution. Decade change push mode enables any value to be changed in decade steps (powers of 10) from 0.0001 to 10,000 per detent
Flash Rate Resolution ±0.05 FPM 30.00-2,999.95 FPM±0.5 FPM 3,000.0-32,500 FPM
Flash Rate (External Triggering) 5-9,999.9 FPM10,000-32,500 FPM0.5000-541.66 FPS
Phase Delay – Degrees 0-359 ±0.1 100-3,499.0 FPM0-355 ±0.1 3,500-9,999.9 FPM0-350 ±0.1 10,000-32,500 FPM
Time Delay – Seconds 0-6.500 seconds ±0.0001 seconds
Auto Step Mode (Range) Step Size 0.0-180.0º Step Rate 0.0001-6.50 seconds per step
Flash Energy (Typical) 150 mJoule < 10,000 FPM;  50 mJoule > 10,000 FPM
Flash Duration (Typical) 10-30 microseconds
Average Power – Watts 10W
Tachometer Mode 5-200,000 RPM from external trigger (flash inhibited above 33,000 FPM)
External Input (1/8″ phone plug) Input Pulse – 5 microseconds, TTL to 24V max
Trigger Output/Remote Sync (Typical) 5V TTL compatible negative edge, 500 microseconds pulse
Power Internal rechargeable batteries or ACT power supply/recharger
Weight 2.5 Lbs. (1.2 kg) including batteries
N.I.S.T. Certificate Included
space
Accessories :
ITEM NO. MODEL CE DESCRIPTION
6180-050 ROS-5P*

X

Remote Optical Sensor with 8 foot cable and mounting bracket
6180-015 IRS-5P* Infrared Sensor with 8 foot cable
6180-017 MT-190P* Magnetic Trigger Sensor/Amplifier with 8 foot cable
6280-034 C-4027 Set (2) mating 1/8″ stereo phone plugs
6280-037 CA-4044-6 6 foot input/output cable, 1/8″ mono phone plug to BNC connector
6280-038 CA-4045-6 6 foot input/output cable, 1/8″ mono phone plug to 1/8″ mono phone plug
6280-030 L-1903 Digital Stroboscope Spare Lamp
6280-041 SPC-1 Splash proof Protective Cover for battery model Stroboscopes
6280-020 PSC-3

X

Power Supply/Recharger, 115 Vac – 50/60 Hz
6280-023 PSC-4

X

Power Supply/Recharger, 230 Vac – 50/60 Hz
6180-060 R-5

X

Recharger, 115 Vac – 50/60 Hz
6180-062 R-6

X

Recharger, 230 Vac – 50/60 Hz
6280-040 CC-7 Plastic Latching Carrying Case
6180-070 T-5 Reflective Tape – 5 foot roll, 0.5 inch wide
5290-104 CAL-N.I.S.T. N.I.S.T. Traceable Certificate of Calibration / Re-Calibration
space
Models :
space
ITEM NO. MODEL CE DESCRIPTION
6210-010 Phaser-Strobe PB 115

X

Stroboscope – 30-32,500 FPM, with R-5 (115 Vac) recharger
6210-011 Phaser-Strobe PB Kit 115

X

Phaser-Strobe PB 115 with PSC-3 (115 Vac) power supply/recharger and spare lamp in latching carrying case
6210-012 Phaser-Strobe PB 230

X

Same as Phaser-Strobe PB 115, but with R-6 (230 Vac) recharger
6210-013 Phaser-Strobe PB Kit 230

X

Same as Phaser-Strobe PB Kit 115, but with PSC-4 (230 Vac) power supply/recharger
space
pdf_pic Downloads: General Specifications
base
  index web mail