• Megger

Megger® MPM1000

Fiber Optic Power Meter
dcm
  • 850, 1300 & 1550nm Germanium Detector
  • Wide Dynamic Range
  • dBm and dBrel (relative) measurement modes
  • Automatic Power Down
  • Power Down override during dBrel measurements
  • Ruggedised waterproof housing to IP54
  • Exceptional battery life

Features

  • Detector Type: Germanium
  • Wavelength: 850nm, 1300nm & 1550nm typical
  • Measurement Range: +5dBm to -60dBm
  • Measurement Accuracy: ±0.3dBm (±5%) at -23dBm and +20ºC ±3ºC
  • Measurement Resolution: 0.1dBm
  • Batteries: 2 x AA Alkaline Cells (NiMh on NiCad can be used)
  • Battery consumption: 20mA nominal
  • Can operate and charge internal batteries using optional charger
  • 3 Year manufacturers warranty

Description

The MPM1000 is an accurate optical power meter that can be used for optical loss testing of fibre optic cables. It has been pre-calibrated for absolute power levels with reference to 1mW (dBm) for 850nm, 1300nm and 1550 nm wavelengths using multi-mode cables. However, it can also be used in relative power mode and can therefore also be used on single-mode cables. The MPM1000 is accurate to ±5% (±0.3dBm) and has a wide dynamic range of +5dBm to -60dBm with a resolution of 0.1dBm.

IIII [+] Read More

It is particularly suitable for the testing of LAN’s, FDDI, and other multimode links whether inside or outside a building.

Although the MPM1000′s main use is in fibre optic cable attenuation testing, other applications include fibre continuity testing, connector testing, and patch lead testing.

 
  • Literature
  • Specifications
 
pdf icon Description
++ MPM1000 Specification sheet
Detector Type: Germanium
Wavelength: 850nm, 1300nm & 1550nm typical
Measurement Range: +5dBm to -60dBm
Wavelength Accuracy: ±0.3dBm (±5%) at -23dBm and +20ºC ±3ºC
Measurement Resolution: 0.1dBm
dBm and dBrel: Yes
Optical Connector: ST, FC or SC connector adaptors available
Power Input:
Can operate and charge internal batteries using optional charger
Batteries:
2 AA Alkaline Cells (NiMh on NiCad can be used)
Battery Consumption:
20mA nominal
Optical Connector:
ST, FC or SC connector adaptors available
Case Dimensions:
160 mm x 83 mm x 30 mm
Instrument Weight:
230g with battery
Operational Temp.:
-15ºC to +50ºC (5ºF to 122ºF)
Operational Humidity:
95% at 40ºC (104ºF)
Storage Temperature:
-20ºC to 70ºC (-4ºF to 158ºF)