• Megger

Megger® TDR2000/2

Cable Fault Locator
Megger TDR2000/2 series cable testers

Features

  • 20 km range at VF = 0.90
  • Monochrome or colour options
  • Primary cell or rechargeable options
  • Large back lit LCD Display
  • Dual cursor measurement
  • Intermittent fault location
  • Output pulse amplitude and width control
  • TX Null technology
  • No blocking filter required
  • Trace Master PC software included
  • 15 memory trace storage
  • 11 fault location modes
  • For use on Telecom TNV-3 circuit, or 300V CAT III
  • power circuits (415 V phase to phase) with fused leads
  • External mains blocking filter not required
  • Screen contrast control
  • Multi language operation, up-loadable using TraceMaster software
  • Three step pulse amplitude control>/li>
  • Adjustable display contrast
  • Protected to IP54
  • High impact ABS case
  • Comes with test and carry case and test leads
IIII [+] Read More

Three Configuration Options

The TDR2000/2 comes in three configurations: TDR2000/2 Monochrome primary cell A fully featured high resolution TDR with backlit monochrome display and powered by 8 x AA (LR6) batteries.

TDR2000/2RM Monochrome rechargeable

As the TDR2000/2 but with a rechargeable NiMH battery pack and charger in place of the Dry cells.

TDR2000/2R Colour rechargeable

As the TDR2000/2RM but with a colour high resolution display providing excellent trace separation in dual tracemodes. The unit is also powered by a rechargeable NiMH and includes battery charger.

Intermittent Mode

An ‘intermittent mode’ continually updates and shows any transient reflections. Any intermittent fault leaves a permanent record on the display, capturing elusive faults.

Dual cursors

The TDR2000/2 can display either single or dual cursors. Single cursor mode displays the distance from the start of the cable to the cursor. In dual cursor mode the distance between faults can be measured.

Fast Find key

One press of the find key automatically adjusts the range and gain and positions the cursor to the major event on the cable.

Tx Null

Tx Null helps eliminate the ‘dead zone’ at the start of the displayed trace, normally obscured by the transmission pulse. By the adjusting the Tx Null the user can see these ‘near end’ faults more clearly.

Output pulse control

Both the amplitude and width of the output pulse can be adjusted to provide the best possible reflection for accurate location of cable faults.Interactive Help Screen A full graphical help screen is available with keyboard layout and individual key operation at the press of a button.

Trace Storage

15 internal trace memories provide for the storage and recall of test results. The traces can be recalled to the display for analysis or compared with an active display to aid in fault location. Alternatively the stored results can be downloaded to a computer, over the RS232 port, using the TraceMaster software and RS232 lead provided.

Trace Master PC Software

Trace Master provides download and upload facilities between the TDR and a computer. Traces can be individually selected, saved to a PC and annotated by the user. Historical information can be reviewed on the PC or recalled to the TDR for comparison with current measurements. Tracemaster is the ideal tool for cable documentation. Results can be printed from the computer for inclusion in documents.

Power source

The TDR2000/2 can be supplied as a standard battery powered unit or in a rechargeable version, as the TDR2000/2RM or TDR2000/R. Fitted with a NiMH rechargeable battery pack the TDR2000/2R and TDR2000/RM are supplied with the charger as standard.

Description

The Megger® TDR2000/2 is a state of the art, monochrome or colour, dual channel Time Domain Reflectometer, capable of identifying and locating a wide range of faults on metallic cables.

The TDR2000/2 has a minimum resolution of 0.1m and a maximum range of 20 km at VF=0.9 and 16 Km at 0.65 VF. The TDR2000/2 can perform single or dual channel measurements on a wide range of metallic cables. Active channels can be compared with each other or with previously stored traces from memory. Differential channel measurements are possible and cross talk between channels can also be identified. All results are displayed on a high resolution, QVGA colour display. Full contrast adjustment provides optimum display contrast in a variety of ambient light conditions.

 
  • Literature
  • Specifications
 
pdf icon Description
++ TDR2000 Specification sheet (1.6 MB)
Specifications
Ranges: 50 m, 100 m, 200 m, 400 m, 1 km, 2 km, 4 km, 8 km, 16 km.150 , 300 , 600 , 1200 , 3000 , 6000 , 12000 , 24000 , and 48000 ft
Accuracy: 0.1% of Range
Resolution: 0.1 m (4inches) up to 200 m0.2 m up to 400 m 0.1% of range above 400 m
TX Null: 0 Ω to 120 Ω
Input impedance: 100 Ω
Output Pulse Amplitude: Nominal 3 V, 5 V and 14 Vpk to pk into an opencircuit
Pulse width user selectable: 50m range: 7 ns, 20 ns, 40 ns, 60 ns, 80 ns
100m range: 7 ns, 40 ns, 60 ns, 80 ns, 100 ns
200 m ranges: 7 ns, 40 ns, 80 ns, 140 ns, 200 ns
400 m range: 40 ns, 80 ns, 160 ns, 200 ns, 400
1km range: 80 ns, 160 ns, 260 ns, 500 ns, 1 ms
2km range: 160 ns, 260 ns, 500 ns, 1 ms, 2 ms
4km range: 240 ns, 500 ns, 1 ms, 2 ms, 4 ms
8km range: 500 ns, 1 ms, 2 ms, 4 ms, 8ms
16km range: 1 ms, 2 ms, 4 ms, 8 ms, 16 ms
(Default pulse width for each range underlined)
Velocity Factor: Variable from 0.30 to 0.99 in steps of 0.001
Gain: 0 to 90dB in steps of 6dB
Refresh Rate:
Once per second for 5 minutes after last key press
Backlight:

Stays on for 1 minute when activated

Display: 320 x 240 pixel eight colour backlight LCD.
Screen Update Rate: Once per second or three times per second, (user selectable).
Power Down:
Automatic after 5, 10 or 15 minutes with no keys pressed, (user selectable).
Backlight:
Stays on for 1, 2 or 5 minutes when activated, (user selectable).
Communications Port:
RS-232C compatible 1 start bit, 8 data bits, 1 stop bit and no parity, 19200 baud standard
Internal Memory:
Storage capacity of 15 waveforms and data