- Megger
Description
Available Products:
- Cable (Fault) Locators, TDRs and Cable Height Meters
- Digital and Power Clamp-on Meters
- Ducters ® Digital Low Resistance Ohmmeters
- Earth Resistance Testers
- Fiber Optics Meters and Sources
- 1-10 kV Insulation and Continuity Testers
- All Purpose and High Accuracy Digital Multimeters
- Oil Test Sets
- Handheld Transformer Turns Ratio Testers
Megger has a wide product line with everything from Cable Fault Locators to Handheld Transformer Turns Ratio Testers.
Handheld TDRThe MEGGER QualiFyr TDR500 cable fault locator breaks new ground as a cost-effective, high specification hand-held Time Domain Reflectometer for locating faults on metallic cables. Designed for the field engineer requiring a low cost solution to field testing, the QualiFyr TDR500 offers all the benefits of MEGGER quality and reliability in an affordable package. Handheld TDR & Cable Fault LocatorThe BTR1500 is a multifunction instrument combining several fundamental tests in one practical, field craft test set. Integrated voltage meter, insulation tester, time domain reflectometer and automatic resistance bridge, provide the test functions for basic cable verification and fault locating on twisted pair, quad and coaxial cables Handheld TDR/Cable Length MeterThe Megger TDR900 is an advanced instrument capable of measuring cable lengths and finding distance to an open or a short using Time Domain Reflectometry. It offers exceptional features and a range capability normally associated with far more expensive instruments Handheld TDRThe MEGGER CFL510F is a compact, ergonomically engineered Time Domain Reflectometer designed for field use. As such it is housed in tough, ABS flame-retardant housings and protected from the ingress of dust and moisture to IP54. Additionally, the product comes complete with multi-purpose test and carry cases designed for hands free neck-strap and tool-belt use. Cable Fault LocatorsThe TDR2000/2 can be used on any cable consisting of at least two insulated metallic elements, one of which may be the sheath or shield of the cable. Dual inputs and large graphic display allow a wide range of comparative tests to be performed between cable pairs or stored traces. The instrument has 15 trace memories, which allows previous test results to be displayed. The included download software allows transfer of the waveform data to a computer, for analysis and storage for future reference Cable Route TracerThe AccuTrace Cable Route Tracer consists of a transmitter, which energizes the line with a traceable signal, and a portable receiver, which detects the signal. The transmitter can energize the line either by magnetic induction from a built-in antenna or by direct conductive connection. Split-box Pipe & Cable LocatorThe Split-box Pipe and Cable Locator is a hand-held instrument in the classic “split-box” design, consisting of a transmitter and a receiver. The instrument traces underground conductive networks such as water and gas mains, telephone, cable TV, and electric power cables. It determines buried lines depth and locates underground metallic masses such as valve caps and manhole covers. Cable Height MeterThe CHM Series of Cable Height Meters utilize ultrasonic sound to determine the height of up to six overhead cables and wires. The instruments are designed to address specific measuring requirements on cables up to 75 feet (23 m).
Digital Clamp-on MetersAC current measurement with current ranges to 400A Digital Clamp-on MetersAC current and voltage measurement with current ranges to 400A and 600A, Resistance from 4 kΩ, 40 kΩ Digital Clamp-on MetersAC and DC current measurement with current ranges to 400A and 1000A, with Frequency ranges from 20 Hz to 10 kHz AC/DC True RMS Digital Clamp-onsAC current measurement with current ranges to 400A AC/DC True RMS Digital Clamp-onsAC True RMS, or DC with current measurements with current ranges up to 400 A and 1000 V AC/DC True RMS Digital Clamp-onsAC True RMS, or DC with current measurements with current ranges up to 400 A and 2000 A Earth Leakage Clamp-onsLeakage current measurement with current range from 30 mA, 300 mA, 30 A and 300 A Digital Power Clamp-onsAC or DC with current measurements, power measurement (40 kW, 400 kW, 600 kW (to 425 kW AC)), VA , VAr, PF, Frequency Digital Power Clamp-onsAC or DC with current measurements, power measurement (4/40/400/1200 kW/kVA/kVAR), VA , VAr, PF, Frequency
Thee-pole earth testing kitThe DET3TC offers the solution for users who are concerned about the inherent dangers and potential cost implications of disconnection of the earth spike. Using the optional I-clamp these problems can be avoided. Digital Low-Resistance OhmmetersThese Earth Resistance Clamp meter are particularly suited for measuring earth resistance in various installations such as buildings, pylons and RF transmitter sites. They can also be used for the inspection and verification of lightening protection systems. Digital Low-Resistance OhmmetersThese Earth Resistance Clamp meter are particularly suited for measuring earth resistance in various installations such as buildings, pylons and RF transmitter sites. They can also be used for the inspection and verification of lightening protection systems. Analog Display Ground TestersThe new ground testing instrument family from Megger offers a unique solution to your ground stake testing needs. The complete kit of instrument, test leads, stakes, batteries and calibration certificate are delivered in a tough polypropylene carry case – everything you need to start testing in one kit. 2, 3, or 4-pole Ground Resistance TestersThe new ground testing instrument family from Megger offers a unique solution to your ground rod and soil resistivity testing needs. The complete kit of instrument, test leads, stakes, batteries and calibration certificate are delivered in a tough polypropylene carry case – everything you need to start testing in one kit. Three-pole Earth Testing KitA complete kit for customers wishing to conduct earth electrode testing using the 2 and 3 pole techniques. With the ability to to conduct soil resistivity, and with 2- and 3-pole earth electrode testing the DET4TD offers the user full flexibility. Four-terminal Ground TesterThe Megger® DET5/4D are fully automatic, four terminal instruments built into a rugged, water-resistant case giving protection for outdoor use. The instrument is suitable for the testing of earth electrodes and measuring earth resistivity. Four-terminal Ground TesterThe Megger® DET4D/DET5D are fully automatic, four-terminal instruments built into a rugged, water resistant case giving protection for outdoor use. The instrument is suitable for the testing of earth electrodes and measuring earth resistivity. Four-terminal Ground TesterThe Megger® DET4R/DET5R are fully automatic, four-terminal instruments built into a rugged, water resistant case giving protection for outdoor use. The instrument is suitable for the testing of earth electrodes and measuring earth resistivity. Three-Terminal Ground Resistance TesterThe DET62D is a fully automatic, three-terminal instrument built into a rugged, water-resistant case for outdoor use. The instrument is suitable for the testing of single ground electrodes such as lightning conductors and other small grounding systems, or for measuring the resistance of conductors. Ground resistance can be measured directly from 100 mΩ to 2 kΩ
Multimode Light SourceThe MLS1000 is a stable optical dual LED source that can be used in conjunction with an optical power meter for optical loss testing of fiber optic cables. It has been designed to output 850nm or 1300nm at a level of -20 dBm into a 62.5/125 multi-mode fibre. Single-mode stabilized light sourceThe MLS2000 is a stable optical dual laser source that can be used in conjunction with an optical power meter for optical loss testing of fibre optic cables. It has been precalibrated to output 1310 nm or 1550 nm respectively for an output level of –6 dBm into a 9/125 single-mode fibre. It is particularly suitable for the testing of SDH, CATV, telecom and other single mode links. Visible Light SourceThe MLS635 is a hand-held, stable, visible light source that can be used to visually test optical fibre cables, splices and connectors on both multi- and single- mode systems. Any sharp bends and breaks in jacketed or bare fibres, or poorly mated connectors, will allow the generated visible light to escape making the MLS635 ideal for identifying faults in fibre optic jumper cables, distribution frames, patch panels and splice trays. Multi-mode power meterThe MPM1000 is an accurate optical power meter that can be used for optical loss testing of fiber optic cables. It has been precalibrated for absolute power levels with reference to 1 mW (dBm) for 850 nm, 1300 nm and 1550 nm laser frequencies using multi-mode cables. However, it can also be used in relative power mode and, therefore, can also be used on single-mode cables. The MPM1000 is accurate to ±5% at -23 dBm (±0.22 dBs) and has a wide dynamic range of +5 dBm to -60 dBm with a resolution of 0.1 dBm. It is particularly suitable for the testing of LANs, FDDI, and other multi-mode links whether inside or outside a building. Single-mode power meterThe MPM2000 is an advanced optical power meter that can be used for optical loss testing of fibre optic cables. These have been precalibrated for absolute power levels with reference to 1 mW (dBm) for 1310 nm and 1550 nm laser frequencies using single mode cables. However, they can also be used in relative power mode and can therefore also be used on multi-mode cables. Single-mode power meterThe MPM2000H is an advanced optical power meter that can be used for optical loss testing of fibre optic cables. These have been precalibrated for absolute power levels with reference to 1 mW (dBm) for 1310 nm and 1550 nm laser frequencies using single mode cables. However, they can also be used in relative power mode and can therefore also be used on multi-mode cables.
Digital Insulation TesterThe complete range of the MIT Series provides indication of insulation resistance up to 999Mohms, 200mA continuity testing, and a fast-reacting continuity buzzer. Digital Insulation TesterRugged enough to withstand the toughest of on-site environments, Megger’s new MIT400 series insulation testers are compact enough to allow easy one-handed operation with either hand. They also fully meet the requirements for Cat IV 600V applications, as defined by IEC61010, ensuring safe operation in all normal electrical, service, maintenance and utility applications Hand-held Insulation TesterHigh spec low voltage/specialty application insulation tester and multimeter. Features 50, 100, 250, 500, and 1000 V insulation ranges Hand-held Insulation TesterProvides all the necessary features for electrical installation testing and servicing needs. For ultimate reliability, the BMM503 is waterproof and dustproof to IP54 and is supplied with a 3-year warranty. Hand-held Insulation TesterAdvanced feature low voltage/specialty application insulation tester and multimeter. Like the BMM80, it offers voltage ranges of 50, 100, 250, 500, and 1000 V. Hand-held Insulation TesterAdvanced feature low voltage/specialty application insulation tester and multimeter. Like the BMM80, it offers voltage ranges of 50, 100, 250, 500, and 1000 V. Multivoltage insulation testersMajor Megger® insulation testers BM12 and MJ10 are portable, self-powered or battery operated instruments designed to give rapid and accurate measurements. They have four d.c. insulation testing voltages 100 V, 250 V, 500 V and 1000 V, and a single insulation resistance range of up to 2000 MΩ. Multivoltage insulation testersThis Series of multivoltage insulation and continuity testers offers advanced performance, specifications and features, as well as simplicity of use. It has insulation test voltages from 50 V to 1000 V d.c., (500 V max. on BM81/2.) Multivoltage Insulation TesterBasic test facilities are available with single insulation test voltages of 500 Vd.c. or 1000 Vd.c. and test results are displayed on a clear 3-digit autoranging LCD. Multivoltage Insulation TesterCombining an analog bar graph display with the simplicity of a clear 3 digit liquid display, the instruments offer a choice of insulation test voltages, with the option of single, dual or triple test voltage instruments. Multivoltage Insulation TesterThis series has a resistance range and 2 voltage ranges. The resistance range measures up to 100k ohm on the digital scale and up to 10 M ohm on the analog scale. Low test voltage and current makes it possible to test circuits with sensitive equipment connected, without causing damage. Insulation TesterThese Insulation Resistance Testers are the ideal instruments when high ranges are needed for measuring insulation resistance. Both provide excellent test voltage regulation and an external guard terminal to eliminate surface leakage current from the measurement. Major Megger Insulation TesterFour of the models feature an analog display having four selectable test voltages of 100, 250, 500 and 1000 V dc, measuring insulation resistance up to 2000 M-Ohms, and an ohm range to 5000 ohms. The other model has four test voltages of 50, 100, 250 and 500 V dc measuring insulation resistance up to 1000 M-Ohms. Wee Megger Insulation TesterThe Wee MEGGER WM6 tester is a self-contained instrument designed to give rapid and accurate resistance measurements, c/w hand-operated generator and test insulation at 500 V d.c. up to 200 MΩ Insulation Testers5 & 10 kV insulation resistance testers from Megger are designed specifically to assist you with the testing and maintenance of high voltage electrical equipment. Insulation TestersThe BM11 Series of 5kV insulation testers provide a choice of features to suit all applications and budgets. Available in analog or with Digital display Insulation TestersThe BM15/MJ15 are compact 5kV insulation testers. They are very simple to use and provide a quick and accurate reading of insulation resistance. The instruments use an analog display with a maximum reading of 20 GΩ. Insulation TestersThis series is compact, with automated 5 kV insulation. It can be used to conduct polarization index, step voltage, dielectric discharge diagnostic and standard insulation tests up to 5 Tera-Ohms. Insulation TestersThe Megger CM500 Multifunction Installation Tester compliments the existing range of insulation testers and the LT7 Ground Loop Impedance Tester, by combining the features of both lines of product into a single instrument. The CM500 also contains more advanced features for testing GFCI’s, a test that is growing in popularity. The primary focus of the CM500 Multifunction Installation Tester is the ability to perform all the required safety checks on electrical installations and directly print all test results on site in conjunction with a serial printer, giving a full Customer/Contractor reference document. High Accuracy Digital MultimetersThe M8000 provides many advanced features. The M8037 is the top of the range instrument it measures true RMS, AC + DC and AC voltage ranges, which more accurately measure voltage values regardless of the waveforms. Square, sawtooth, triangle, pulse trains, spikes as well as distorted waveforms with the presence of harmonics can all be measured accurately. The M8037 also has a backlit display for easier readings in poorly illuminated areas. Both the M8035 and M8037 have basic accuracies of 0.08%, dual displays and the choice of operation in the manual or auto-ranging mode. Rugged Digital MultimetersRugged dependability for use in field conditions. Both the M7027 and M7029 are supplied in rugged yellow cases with wrap around rubberized holsters for added protection against mishandling. The main difference between the models is that the M7027 has a basic accuracy of 0.3% and the M7029 has a basic accuracy of 0.2%. Both models have dual displays and the choice of operation in the 4,000 count or the higher resolution 40,000 count mode. General Purpose Digital MultimetersThese digital multimeters combine ruggedness with reliability, accuracy and ease of use. they are robust and suitable for general purpose applications, including operation in harsh environments. They are supplied with watertight seals at the rotary switch, input terminals and seams to keep out dust, dirt and moisture. There are two instruments that make up the M5000 series, both offering a wide spectrum of measuring functions and ranges. Rugged Digital MultimetersTough, compact instruments designed for the contracting electrician, but are also suitable for a wide range of applications and users. Both instruments offer a range of measurement modes for AC and DC applications, resistance and current measurement. Tough, rubber armoured cases offering the maximum amount of protection from the extreme use found in modern industrial environments. Oil Test SetsThe electrical properties of the oil can change with degradation due to oxidation, acids, sludge, gas and water absorption. These changes can be identified through a dielectric strength test. Megger Oil Test Sets are designed specifically to determine the dielectric strength of insulation oils. The range of Megger Oil Test Sets offer solutions for all oil testing. Handheld Transformer Turns Ratio TesterThe Megger TTR20 is an automatic, hand-held, battery operated transformer turns ratio test set. It is used to measure the turns ratio, excitation current and polarity of windings in single- and three-phase distribution and power transformers (tested phase by phase), potential & current transformers, and tapped transformers. Handheld Transformer Turns Ratio TesterThe Megger TTR25 is an automatic hand-held battery operated transformer turns ratio test set. It is used to measure the turns ratio, excitation current and polarity of windings in single- and three-phase distribution and power transformers (tested phase by phase), potential & current transformers, and tapped transformers. The unique design of the TTR25 allows the user to operate the test set while holding it in one hand. It effectively eliminates the user from having to kneel or bend down to operate the instrument and speeds up testing time. TTR20 Handheld Single Phase Turns Ratio TestersThe Megger TTR100 is an automatic handheld, battery operated transformer turns ratio test set used to measure the turns ratio, excitation current, phase displacement, dc resistance and polarity of windings in single- and threephase distribution transformers (tested phase by phase), potential & current transformers, and tapped transformers. Deviations in the mentioned measurements will quickly indicate problems in transformer windings or in the magnetic core circuits.
|