ITECH

Your Power Testing Solution

IIII [+] About ITECH AC/DC Electronic Loads

The IT8615 series is the latest AC/DC electronic load launched by ITECH with a small 3U volume. It has a 420V/20A/1800W input scope and an adjustable frequency of 45HZ~100HZ. The unique oscillographic display function can display the voltage and current input waveform. It is equipped with measurement modes of different parameters such as surge current, peak value, effective value, and PF(power factor) and voltage harmonics as high as 50 orders can be measured to make a comprehensive analysis of the performance of object to be measured. The product is equipped with standard GPIB, LAN and USB communication interfaces and can provide rapid and stable communication quality.

Applications: Perfect for testing Uninterruptible Power Supplies(UPS), inverters, AC power and relevant AC electronic components.

 
  • ITECH
  • IT8615 Series

AC/DC Electronic Loads

Multiple Modes of Operation in AC and DC

III IT8615 AC/DC Electronic Loads
ITECH IT7300

IT8615 AC/DC E-Load

  • Input scope: 50~420Vrms, 0~20Arms and 1800W
  • Frequency range: 45~100HZ
  • 3U volume, 1800W and 7”LCD screen
  • Parallel connection/three-phase control
  • Oscilloscope function supporting display of voltage and current waveform
  • Measures: Vrms, Vpk, Vdc, Irms, Ipk, Idc, W, VA, VAR, CF, PF and FREQ
  • Measures THD (V) parameters of as high as 50 orders
  • AC electronic load: CC /CR/CW mode
  • DC electronic load: CC/CR/CW/CV mode
  • External 0-10V analog quantity control, voltage and current analog quantity monitoring function
  • OTP, OCP, OVP, UVP and OPP protection function
  • GPIB, LAN and USB communication interface and external USB flash disk interface

DC Electronic Loads

Digital, Programmable

III IT8615+ Programmable DC Electronic Load DC E-Load
ITECH IT6500

Programmable DC Electronic Load

  • Dynamic mode: up to 10KHZ
  • Resolution of voltage and current :0.1mV/0.1mA
  • Four working modes: CV/CC/CR/CP
  • Remote sensing function
  • Battery test, automatic test, OPP test, OCP test functions
  • Storage for 100 sets
  • Short-circuit function
  • Current monitoring function
  • Power off memory function
  • With rotary coding switch to make an easy operation

DC Electronic Loads

Multi-Channel

III IT8700 Multi-Channel DC Electronic Load
ITECH IT8700

IT8700 Multi-Channel DC E-Load

  • Removable modules for easy system configurability
  • Dynamic power distribution function for dual channels, save your cost
  • Dual-channel module displays every channel information simultaneously
  • Measure short-circuit peak current value
  • Up to 25KHZ transient mode and 100KHZ list mode
  • Measurement resolution: 0.1mV,0.01mA(10μA)
  • Measurement speed: up to 50KHZ
  • Auto-test function
  • Support up to 16 channels with mainframe extension
  • Output resolution up to 16 bits, voltmeter and ammeter reach 5 1/2 bits
  • CC, CV, CR, CW mode
  • Highlight VFD display for both mainframe and modules
  • Support USBTMC/SCPI communication protocol
  • Output terminals on the rear panel
  • Simulate the transient response and export measured values in time
  • Built-in waveform generator and List mode
  • Built-in LAN, GPIB, USB, RS232 interfaces

DC Electronic Loads

High-Power

III IT8800 High Power DC Electronic Load
ITECH IT8900

IT8800 High-Power DC E-Load

  • Wide power range:150W~600KW
  • Dynamic mode: up to 25 KHz
  • Measurement resolution:0.1mv,0.01ma
  • Measurement speed: up to 50KHz ·Adjustable current rising slope:0.001A/us~2.5A/us
  • Dynamic test, auto-test, short-circuit test function
  • Rotary knob, making the operation easier
  • Power off memory function
  • CR-LED test,OCP/OPP test, Voltage rising speed test, Battery test function
  • External analog control
  • Support VISA/USBTMC/SCPI communication protocol
  • Built-in RS232/USB/GPIB communication interface
  • Four operation mode:CC/CV/CW/CR
  • Remote sensing

DC Electronic Loads

Digital, Easy to program parameters

III IT8900 DC Electronic Load 
ITECH IT8900

IT8900 DC E-Load

  • Unique CR-LED mode with perfect LED driver test scheme
  • Easy programmable parameter setting, applicable for simulating LED lights with different characteristics
  • Adjustable frequency, duty ratio PWM dimming output port (frequency:20HZ-2KHZ)
  • I-pp/I-max measurement function can test current ripple and start up surge current of LED constant flow source
  • Various working modes: CR-LED/CC/CV+CC/CR/CW etc.
  • Voltage and current testing speed can reach 50KHZ
  • Supports VISA/USBTMC/SCPI communication protocols