(HD) Series High Density, Mechanically

Sealed wire Feedthrough Assembly
(HD) Series High Density, Mechanically Sealed wire Feedthrough Assembly
  • HD18 – 0.187″ Diameter 12 Conductor Wire Feedthrough Assembly
  • HD25 – 0.250″ Diameter 24 Conductor Wire Feedthrough Assembly
  • HD31 – 0.312″ Diameter 40 Conductor Wire Feedthrough Assembly
  • HD37 – 0.375 Diameter 60 Conductor Wire Feedthrough Assembly
  • Sheath Material: 300 Series SST, 4-1/2″ nominal length
  • Temperature Range From -112°F to +250°F
  • (-80°C to +120°C)
  • Vacuum Rating: 5 x 10-6mmHg @68°F (20°C)
  • Leak Rate: 1 x 10-9 scc/sec He @68°F (20°C),
  • 1 atm supplied
  • Voltage Rating: 100 VDC
  • Amperage Ratings: 500mA
  • Feedthrough Pressure Rating @68°F (20°C):
  • 5,000 psi (345 bar)
  • Sealing gland pressure ratings, see related gland: PG, MK, MHM
  • For 2 to 12 wires in single gland, see TG with 24 AWG
  • Other wire type combinations are available. Consult factory.
  • ®Chromel-Alumel is a registered trade name of Hoskins Manufacturing.
  • ®Teflon is a registered trademark of E.I. Du Pont de Nemours.
Product Description:
This assembly consists of a stainless steel tubing swaged over bundled 24 AWG, solid, Teflon® coated thermocouple grade wires and/or copper wires. The feedthrough is furnished with 24 inches of leadwire on each end. Longer wire lengths can be furnished as required.
Downloads:pdf_pic Downloads:General Specifications
      mail index web