|
|
|
 |
 |
|
![AEMC Model SL261 [Cat. No. 1201.51] AC/DC Current Probe Model (BNC) 100mV/A - 10A peak & 10mV/A - 100A peak](/Assets/jpgs/AEMC/Current_Probes/BNC_Probes/SL261.jpg) |
- Low AC and DC measurements
- Current range from 100mA to 100AAC/DC
- Oscilloscope current probe for applications in industrial and power environments
- Analyze, measure and accurately display distorted current waveforms and harmonics
- Direct BNC connection to scope
- Jaw designed for easy maneuvering in crowded spaces
- Unique design for probing in
crowded wiring in industrial and
automotive environments
- Hall effect sensor technology
- Use with Oscilloscopes, DMMs, voltmeters and other voltage measuring
instruments
- UL approved for Canada and
United States
- Double Insulation
|
|
|
|
|
|
|
|
|
|
- Oscilloscope applications in industrial or power environments
- Analysis and measurement of distorted current waveforms and harmonics
|
|
|
|
|
|
 |
|
 |
The Model SL261 is a portable 100A peak current probe with insulated BNC output cable that can accurately measure AC or DC current waveforms. The unit has proportional mV output for direct readings on oscilloscopes. Three position slide switch on handle selects ranges and ON/OFF. |
|
 |
|
|
|
 |
|
|
SL261 |
|
ELECTRICAL |
|
Nominal Range |
10A & 100A |
Measurement Range |
100mA to 100A |
Transformation Ratio |
Voltage Output |
Accuracy(100mV/A) |
50mA – 10A Peak |
3% of Reading ± 50mA |
500mA – 40A Peak |
±4% of Reading ± 50mA |
40A – 100A Peak |
±15% max @ 100A |
Phase Shift (10mV/A Range) DC |
to 65Hz 1.5° |
Overload |
Red LED indicates input greater than the selected range |
Frequency Range |
DC to 100kHz (-3dB with current derating) |
Load Impedance |
>1MΩ/100pF |
Working/Common Mode Voltage |
600Vrms |
Output Termination |
6.5 ft BNC cable |
MECHANICAL |
Operating Temperature |
32° to 122°F (0° to 50°C) |
Storage Temperature |
-22° to 176°F (-30° to 80°C) |
Operating Relative Humidity |
10° to 30°C: 85 ± 5% RH*40° to 50°C: 45 ± 5% RH*
*(without condensation) |
Maximum Conductor Size |
0.46″ (11.8mm) |
Dimensions |
9.09 x 1.42 x 2.64″ (231 x 36 x 67mm) |
Weight |
11.6 oz (330g) with battery |
Polycarbonate Material |
Handle: Lexan® 920A, UL94 V2 |
SAFETY |
Electrical |
EN 61010-2-32 |
UL Approval |
Yes – Canada and United States |
Double Insulation |
Yes |
CE Mark |
Yes |
|
|
|
|
 |
|
|
Specifications |
|
|
|
 |
|
|
.jpg) |

The Model SL261 is designed for AC/DC
current measurement capabilities using
Hall effect technology. It measures
from a few mA to over 100A.
The “screw driver” shape, with its
narrow elongated prod, was chosen
to permit probing in crowded cable
bundles, or measuring in tight areas
such as on circuit boards, motor
controllers and automotive circuitry.
The electronics and batteries are selfcontained
in the handles. It is an
excellent companion to DMMs,
recorders and loggers, oscilloscopes
and waveform displaying instruments.
Low phase shift also insures reliable
power and power quality measurements.
The Model SL261 is designed for
current measuring and displaying on
oscilloscopes. AC + DC output signals
proportional to the total current are
provided for True RMS measurements.