AEMC Instruments

IIII [+] About AEMC

AEMC® is the industry leader in current measurement probes, ground resistance testers and insulation resistance testers. AEMC® full product line also includes clamp-on meters, ratiometers, power meters, harmonic power meters, data loggers, lightmeters and numerous other electrical test tools.

 
  • AEMC Instruments
AEMC
AEMC Instruments manufactures professional electrical test and measurement instruments for the industrial, commercial and utility marketplace.
  • Cable Testers
  • Clamp-on Meters
  • Current Measurement Probes
  • Data Loggers
  • DC Power Supplies
  • Electrical Test Tools
  • Environmental Testers
  • Ground Resistance Testers
  • Megohmmeters
  • Micro-Ohmmeters
  • Motor/Transformer Testers
  • Power & Power Quality

Cable Testers

Cable Testing & Tracing Instruments

III CA7028 Wire Mapper Pro
ca7028

CA7028 LAN & Telephone Cable Tester

  • Indicates all common wiring faults including split pairs, shorts, opens, reversed pairs and crossed wires
  • Unique graphical and digital display of fault information and length
  • Indicates distances to opens and shorts and identifies locations
  • Built-in tone generator for tracing and locating cables
III CA7027 Handheld Graphical TDR
ca7027

CA7027 Fault Mapper Pro® Model CA7027 Hand-held Graphical TDR

  • Identify and locate faults on power & communication cables, given access to one end only
  • measures cable length and indicates the length and distance to cable faults to a range of 9 ft (3 m) to 19,000 ft (6000m)
  • works with virtually any type of cable
III CA7024 TDR, Cable Length Meter & Fault Locator
ca7024

CA7024 TDR (Time Domain Refloctometer), Cable Length Meter & Fault Locator

  • Hand-held
  • Detects opens & shorts
  • Measure cable length up to 6000 ft (2000m)
  • Automatic cable impedance compensation

Clamp Meters

AEMC® manufactures a complete range of Clamp-on meters for the electrical industry. There is no need to switch off or break circuits.

III AEMC 200 Series General Purpose Clamp-on
AEMC

  • UL 94 VI flame retardant self-extinguishing
  • IP54 Rated
  • Measures up to 1000VAC (1400V peak), 1000VDC and AC+DC with resolution to 10mV
  • Measures frequency to 20kHz with 0.1Hz resolution
III AEMC 400 Series Clamp-on
AEMC 512

  • 1000V CAT IV Rated
  • 10,000-count blue electroluminescent backlit display
  • Measures frequency to 20kHz with 0.1Hz resolution
  • True InRush® current measurement with 1mS capture
III AEMC 500 Series Clamp-on
AEMC

  • Compact and Full-size options
  • Continuity with beeper below 40Ω
  • Large, easy-to-read 4000-count LCD display
  • 42-segment analog bargraph
III AEMC 600 Series Clamp-on
AEMC

  • 1000V CAT IV Rated
  • UL 94 VI flame retardant self-extinguishing
  • Measures up to 1000VAC (1400V peak), 1000VDC and AC+DC with resolution to 10mV
  • Auto selects AC or DC measurement

Current Probes

Flexible current probes are designed to take measurements where standard clamp-ons cannot.

III AEMC Current Probes
Current Probes

AmpFlex® Flexible Current Probes

  • composed of a flexible sensor & an electronic module
  • Four sensor lengths(24″, 36″, 48″, 60″)
  • Measure from 5 to 30,000A rms
  • Permits mesasurement where standard clamp-ons can’t be used
III Oscilloscope & BNC-Terminated Probes
AEMC Oscilloscope & BNC-terminated probles

Oscilloscope & BNC-Terminated Probes

  • Expand oscilloscope applications
  • Permit accurate current measurement without breaking into the circuit
  • Direct connection to oscilloscope
  • Safe connect with insulated coaxial cable with insulated BNC
III DC/AC Microprobes
AEMC Micro-probes

K Series Microprobes

  • exceptional DC/AC current measurement
  • Very small and compact
  • Accurate measurements of very low currents with 50µADC sensitivity
  • High sensitivity & dynamic range
III General Purpose Probes
AEMC General Purpose probles

Most complete line of probes

  • 3 Outputs, total power up to 195W
  • Low Ripple Noise <350 uVrms/2mVpp
  • Fast transient response time: <50 us
  • Channel isolation: CH1 || CH2,CH3

Single & Multi-Channel Data Loggers

AC or DC Current, Voltage, Temperature and Clamp-On Loggers

III AEMC Simple Logger Model L261 [2126.05]
AEMC L264 clamp-on data loggers

Simple Logger

  • TRMS Voltage recording up to 600VAC/DC
  • Programmable storage rates from 8 per second to 1 every day
  • 5 LED indicators quickly and clearly display logger status
  • Includes free DataView software for data storage, real-time display, analysis and report generation
III AEMC Simple Logger Model AL834 [2126.14]
AEMC AL834 data loggers

Simple Logger

  • Includes 4 integral AmpFlex flexible current probes that will measure up to 3000A TRMS with a 0.5A resolution
  • Dual range 300/3000A user selectable channel
  • 64 samples per cycle
  • 5 LED indicators quickly and clearly display logger status
  • 6 LED indicators quickly and clearly display logger status
III AEMC Simple Logger Model DL-1081 [2134.62]
AEMC DL-1081 data loggers

Data Logger

  • 8 universal analog inputs and 8 digital I/O
  • 24VDC output to power up to 8 4-20mA transmitters
  • Up to 128 virtual channels
  • Includes free software for data storage, real-time display, analysis and report generation

Power Supplies

Single, dual and triple DC output power supplies

III AEMC Model AX502 [2130.06] Power Supply
AEMC AX502 Power Supplies

Dual output, 0-2.5A; 0-30VDC

  • Single and dual 0 to 30VDC / 0 to 2.5A outputs
  • Series and Parallel operation permit 0 to 60V or 0 to 5A output
  • Low noise & stable linear technology for clean output
  • High efficiency toroidal transformers, low electromagnetic emissions
  • Active protection against overloads, short circuits and overheating
III AEMC Model AX503 [2130.07] Power Supply
AEMC Model 503

Triple output, two 0 to 2.5A; 0-30 V DC, 2.7-5.5 V DC

  • Single, dual and triple 0 to 30VDC / 0 to 2.5A outputs
  • Series and Parallel operation permit 0 to 60V or 0 to 5A output
  • Low noise & stable linear technology for clean output
  • High efficiency torodial transformers: low electromagnetic emissions
  • Active protection against overloads, short circuits and overheating

Electrical Test

Electrical Test Equipment

III AEMC Model 6608 [2121.11} Phase Rotation Meters
AEMC Model 6608

Phase & Rotation Meter

  • Phase rotation indicators
  • Battery Powered
  • Simple operation
  • 600V CAT III CE Mark
III AEMC Model 6609 [2131.11] Phase Rotation Meters
AEMC 6609

Phase & Rotation Meter

  • Phase & motor rotation indicators
  • Battery-operated
  • Simple operation
  • 600V CAT III CE Mark
III AEMC Model 6610 [2121.12] Phase Rotation Meter
AEMC 6610

Phase/Motor Rotation Meter

  • Voltage sensing detector clips (no metal contact points)
  • Operating voltage: 75 to 1000VAC
  • Frequency range: 45 to 65Hz
  • Phase rotation LED indicators (ABC or BAC)
III AEMC ALS-1 [2121.05] AC Line Splitter
AEMC ALS-1

Avoids splitting lines, makes reading current easy

  • Increases sensitivity probes & clamp-on meters 10 times in X10 mode
  • Direct reading X1 mode
  • Voltmeter input jacks
  • 120V, 15A capacity
  • Integral ground conductor
III AEMC Model CA773 [2121.15] Voltage Absence Tester
AEMC ca773

Voltage Absence Tester

  • Use in extreme conditions: type-S extended climatic class
  • RCD trip testing
  • Extended continuity test (R< 2 kΩ, 60 kΩ and 300 kΩ)
  • Two-pole phase-sequence testing with “2-wire method” up to 400 Hz, suitable for isolating transformers and electrical generator sets

Environmental Testers

Light meters, Digital and Infrared thermometers, Hygrometers, Sound level and Moisture meters as well as Carbon monoxide monitors.

III AEMC Model CA811 [2121.20] Lightmeter
AEMC CA811 lightmeter

Easy operation Lightmeter

  • Designed to measure a wide range of lighting types
  • Measures in footcandles (fc) or lux
  • Cosine corrected
  • HOLD & MAX functions
III AEMC Model CA813 [2121.21] Lightmeter
AEMC Model CA813 lightmeter

Easy operation Lightmeter

  • Designed to measure a wide range of lighting types
  • Removable sensor for remote reading
  • Measures in footcandles (fc) or lux
  • Cosine corrected
  • HOLD & PEAK functions
III AEMC Model CA879 [2121.37] Infrared Thermometer
AEMC CA879

Infrared Thermometer

  • Easy one-hand operation
  • Laser guide for precise aim
  • 12:1 field of vison ratio
  • Fixed 0.95 emissivity
III AEMC Model CA846 [2121.24] Digital Thermometer
AEMC CA846 digtital thermometer

Thermo-Hygrometer

  • Easy one-hand operation
  • Measures temperature in °F and °C
  • Accurate NTC sensor
  • MAX & HOLD functions
  • Quick response RH sensor
III AEMC Model CA832 [2121.23] Sound Level Meter
AEMC CA832 sound level meter

Easy one-hand operation

  • Measures sound according to the sensitivity of the human ear
  • Three measurement range from 35 to 130dB
  • Accuracy ±1.5dB
  • MAX function
  • Two time weighting curves: slow (550ms) and fast (55ms)
III AEMC Model 1950 [2120.40] Infrared Camera
AEMC 1950 infrared camera

Imaging IR Camera

  • Focus free imaging, automatic brightness control
  • 320 x 240 pixel 2.8” color display
  • Exceptional 13 hour battery life < 3ms
  • Captures thermal & digital images simultaneously
  • Programmable trigger & cursor, configurable emissivity table
III CA1725 [1748.10] Infrared Tachometer
AEMC Ca1725 infrared tachometer

100,000-count up to 100,000 RPM

  • Measurements up to 100,000rpm
  • Extensive programming possibilities
  • Digital display with analog bargraph
  • Stores up to 4000 measurements results
III CA1727 [1748.30] Infrared Tachometers
AEMC ca1727 infrared tachometers

100,000-count up to 100,000 RPM c/w USB connectivity

  • Measurements up to 100,000rpm
  • Extensive programming possibilities
  • Digital display with analog bargraph
  • Stores up to 4000 measurements results
  • USB interface & TachoGraph software
III AEMC Model CA863 [2121.27] Thermometer – DISCONTINUED –
AEMC CA863

Thermometer (Dual K thermocouple)

  • Easy one-hand operation
  • K thermocouple included
  • Measures temperature in °F and °C
  • MAX and HOLD functions
  • 0.1° resolution

Ground Resistance Testers

Battery or AC powered. Analog and digital models.

III AEMC Model 3640 [2114.92] Ground Resistance Tester
3640

Ground Resistance Digital 3-Point Tester

  • Fall-of-Potential method
  • Measures ground resistance (2- and 3-Point)
  • Autoranging: automatically selects the optimum range
  • Designed to reject high levels of noise and interference
III AEMC Model 6470B [2135.01] Ground Resistance Tester
AEMC 6470

4-point Ground Resistance Tester

  • 3-Point Fall-of-Potential measurement
  • 3-Point earth coupling measurement
  • Manual/automatic frequency scan 40 – 513Hz for accuracy in electrically noisy environments
  • Earth coupling testing
III AEMC Model 4620 [2130.43] Ground Tester
AEMC 4620

Battery-powered Ground Tester

  • Measures soil resistivity(4-Point) method
  • Measures ground resistance(2- and 3-Point) Fall-of-Potential method
  • Step voltage tests and touch potential measurements
  • Auto-Ranging: automatically selects the optimum range
III AEMC Model 4630 [2130.44] Ground Tester
AEMC 4630

Rechargeable Battery Ground Tester

  • Measures ground resistance(2- and 3-Point) Fall-of-Potential method
  • Step voltage tests and touch potential measurements
  • Auto-Ranging: automatically selects the optimum range
  • Designed to reject high levels of noise interference
III AEMC Model 6416 [2141.01] Clamp-on Ground Tester
AEMC 6416

Ground Resistance Tester

  • Measures ground rod and grid resistance and impedance
  • Can be used in multi-grounded systems without disconnecting
  • Test frequency selection
  • Loop resistance indication
  • Touch voltage indication
III AEMC Model 6417 [2141.02] Ground Tester
AEMC 6417

Clamp-on Ground Tester

  • Measures ground rod and grid resistance and impedance
  • Can be used in multi-grounded systems without disconnecting
  • Test frequency selection
  • Loop resistance function
  • Touch voltage indication

Megohmmeters

Complete line of Megohmmeters (Insulation Testers)

III Model 1050 [2130.01] Megohmmeter
AEMC 6501 megohmmeters

Megohmmeters

  • Test voltage selections of 50V, 100V, 250V, 500V, 1000V
  • Insulation measurements to 4000GΩ (4TΩ)
  • Automatic discharge and display of discharge voltage
  • EN 61010-1, 600V CAT III, EN 61557
III Model 6505 [2130.18] Megohmmeter
AEMC 6505 megohmmeters

Megohmmeters

  • Test voltage selections of 500V, 1000V, 2500V and 5000V
  • Insulation measurements from 30kΩ to 10,000GΩ (10TΩ)
  • Automatic calculation of DAR and PI values
  • Designed and built to IEC safety standards
III Model 6555 [2130.32] Megohmmeter
AEMC 6555 megohmmeters

Megohmmeters

  • Fixed or programmable test voltage from 40V to 10kV/15kV
  • Wide measurement range from 10kΩ to 30TΩ
  • Large, backlit graphical LCD screen with digital display bargraph and R(t) + V(t), I(t) and I(V) graphs
  • Optically isolated USB communication for transfer onto PC and report generation with DataView software
III Multi-function Installation Model C.A. 6116N [2138.06]
AEMC CA6116

Multi-function Installation Model

  • Testing according to the international standards IEC 60364-6, NF C 15-100, VDE 100, and XP C16-600
  • Suitable for all neutral systems (TT, TN, IT)
  • Integrated fuse table for quick reading of the results on the instrument
  • Loop measurement with 1mΩ resolution
III Model 6526 [2155.53] Megohmmeter
AEMC 6526 megohmmeters

1000V Megohmmeters

  • 1 kV Insulation and Multi-Function Tester
  • Measures Resistance, Capacitance, Continuity, Frequency and Voltage
  • 50V, 100V, 250V, 500V and 1000V Insulation Test Voltages
  • 200GΩ Max Insulation Resistance
III AEMC Model 5070 [2130.30] Meghommeter
AEMC 5070 megohmmeters

5000V Graphical Insulation Tester

  • Test voltage combination of 500V, 1000V, 2500V and 5000V
  • Insulation measurements from 30kΩ to 10TΩ
  • Adjustable and programmable test voltage (40 to 5100V)
  • Automatic step voltage with programmable step and dwell times
  • Programmable temperature compensation of resistance readings
III AEMC 1045 Meghommeter -OBSOLETE-
AEMC 6524 megohmmeters

Model 1045 [2116.93] Meghommeter -OBSOLETE- Replaced by 6524 & 6526
1000V Megohmmeter, Insulation Tester

  • Test voltage combinations of 250V, 500V and 1000V
  • Insulation measurements to 2000MΩ (2GΩ)

Micro-ohmmeters

Rugged and Accurate

III AEMC Model 6240 [2129.80] Micro-ohmmeter
AEMC 6240

10A Micro-Ohmmeter

  • Measures from 1µΩ to 400Ω
  • Test current selection from 10mA to 10A
  • Manual temperature compensation
  • Front panel polarity reverse function
III AEMC Model 6255 [2129.84] Micro-ohmmeter
AEMC 6255 micro-ohmmeter

Micro-ohmmeter

  • Test up to 60 minutes continuously at 10A
  • Measure from 1μΩ (0.1 μΩ resolution) to 2500Ω
  • Test current selection of 1mA, 10mA, 100mA, 1A, and 10A
  • Internal rechargeable batterie conduct up to 5000 – 10A tests
III AEMC Model 8505 [2129.83] Micro-ohmmeter
AEMC 8505 micro-ohmmeter

Micro-ohmmeter

  • Check coil continuity on single and three-phase transformers
  • Detects open or shorted coils and capacitors
  • Automatically identifies device as a transformer or capacitor
  • Built-in self-test for inductance and capacitance

Motor/Transformer Testers

Portable digital transformer ratiometer designed for on-site testing of power, potential and current transformers.

III AEMC DTR 8510 [2136.50] Motor/Transformer Testers
AEMC DTR8510

Transformer Ratiometers

  • Ratio Testing: PT/VT 0.8000:1 to 8000:1 & CT 0.8000 to 1000.0 (Auto-Ranging)
  • Tests performed by exciting the primary and reading the secondary
  • Continuity test indicates open or loose terminal connections
  • DC test mode eliminates errors due to magnetic build up
III AEMC Model 6292 [2136.51] Quick Tester
AEMC 6292

Quick Tester

  • Ratio Testing: PT/VT 0.8000:1 to 8000:1 & CT 0.8000 to 1000.0 (Auto-Ranging)
  • Tests performed by exciting the primary and reading the secondary
  • Continuity test indicates open or loose terminal connections
  • DC test mode eliminates errors due to magnetic build up

Power & Power Quality

Powerful, easy to use, accurate.

III AEMC 8230 1Ø-Phase Power Quality Analyzer
AEMC 8230 Power Quality Meter

AEMC 8230[2130.81]Single Phase Power Quality Analyzer

  • Measures up to 660Vrms or VDC
  • Measures up to 6500AAC or 1400ADC (probe dependent)
  • Displays Min, Max and Average Volts and Amps, Crest Factor, Peak value and K-Factor
  • Configurable from DataView® software or front panel
III AEMC 8336[2136.30] Powerpad
AEMC 8230 Power Quality Meter

Three-Phase Power Quality Analyzer

  • True RMS single-, two-, and three-phase measurements at 256 samples/cycle, plus DC
  • Measures DC volts, amps and power
  • Displays and captures voltage, current and power harmonics to 50th order, including direction, in real-time
  • kVA, kvar and kW per phase and total
  • kVAh, kvarh and kWh per phase and total
III AEMC PEL 103 [2131.62] Power & Energy Logger (w/LCD, no sensors)
AEMC PEL103

Power & Energy Logger (without sensors, also available with sensors as 2131.52)

  • Simple-to-use, single-, dual- (split-phase) and three-phase (Y, ∆) power & energy loggers
  • Designed to work in 1000V CAT III and 600V CAT IV environments and fits in many distribution panels
  • Energy measurements: kVAh, kWh (source, load) and kvarh (quadrant indication)
  • USB, LAN, Ethernet and Bluetooth (Class 1 wireless communication, up to 300ft away)