Yokogawa

Darwin Data Aquisition Equipment and Portable Recorders

The series is designed to overcome conventional problems and to offer a flexible response to changes in the environment. This ability to evolve with the times makes the series a new standard for data acquisition equipment.

Data Aquisition Equipment

Datum-Y: Portable Data Station - "World first in measuring instruments!" Yokogawa is the first to obtain IPv6 Ready Logo Phase-1(ID:01-000273). Portable size (155×155×55mm) and lightweight (approx. 800g) lets you carry with one hand. Use of a color TFT LCD with wide viewing angle.

The Datum-Y portable data logger directly measures and acquires temperature (thermocouple/resistance temperature detector) and DC voltage. It provides two configurations of input terminals offering 8 and 16 channels, repectively individual channels can be set independently through universal insulated inputs.

DA100: PC-based Data Acquisition Equipment - a stand-alone model that can acquire data from up to 40 channels, and an expandable model with a maximum of 300 channels

DC100: PC-based Data Acquisition Equipment - 10 to 300 isolated inputs
with a 0.5 sec. measurement intervals and flexible inputs (DC Voltage, Thermocouples, RTDs, mAmps, AC Voltage/Current, Strain, Pulse )

MW100: New! Data Acquisition Unit
The MW100 is a scalable, high performance data acquisition/data-logging platform designed for both PC-controlled and stand-alone operation under harsh operating conditions.

MX100: DAQMASTER PC-Based Data Acquisition Unit
A PC-based data acquisition system for the future, delivering unparalleled performance. When combined with Yokogawa's proprietary PC software, the MX100's high speed, multi channel capability, and high withstand voltage offers the ultimate in measurement power.

WE7000: Computer based - Simple data acquisition without any software development Each system includes standard control software and each module has its firmware resident within the module.

Darwin Hybrid Recorders - Direct to PC
The name "DARWIN" stands for Data Acquisition and Recording Windows. The equipment is modularized, with the data acquisition engine as the heart of the measurement system

DR130: Records clearly, in 10 colors, data from all measurement points, at 2-second intervals

DR230: Scans with a speed of up to 300 points in 0.5 seconds and recording these to strip chart or saving this data to the 3.5 inch FDD

DR240: Uses miniaturization to reduce the instrument’s depth in half while increasing input capacity to as much as 300 points and 60 calculated channels