Spacer Home Contact_us ob Opportunities ISO_Registration Privacy_Statement
 
index

 
Caption_Header
Yokogawa
 Model CA71,
Comprehensive source/measure Calibrator 		 
previous URL Next URL
< Links >
 
 
 
 
CA71
  
 
 
cart   Order YOKOGAWA TMI Products on-line
 
 
  Characteristics:  
 
  • Simultaneous signal generation and measurement capability:
    The CA71 lets you handle regular tests on TCs, RTDs and various other types of sensors and instruments, as well as operation checks when a problem has occurred (TC and RTD measurement functions are CA71 only.)
  • AC voltage (including supply voltage) measurement capability:
    In cases where numerous signal converters and other devices are mounted on a rack or panel, the Handy Calibrator can be used to check the input and output signals of each device, while simultaneously checking the power supply.
  • A wide array of useful functions:
  • Source:
    Values set in steps of 4-20 mA, 24V DC Power supply to transmitter
  • Online communication (CA71 only):
    RS-232C-compliant optically isolated interface
  • Divided output (n/m) function:
    Output settings are divided (n/m), eliminating the need for bothersome calculations for percentage output
  • Auto step function:
    Changes the output value in step form based on the setting from the divided output (n/m) functions. Changes can be generated automatically every 10% or 25%
  • Sweep functions: Linearly raises or lowers the output. The raising/lowering time can be set to either 16 or 32 seconds
  • Memory function:
    Source values and measurements forming individual value sets can be saved to or loaded from the Handy Calibrator's internal memory (maximum 50 value sets)
  • Easy operation:
    The Handy Calibrator incorporates rotary switches for simple handing. Just open the carrying case cover and connect the cables, and you're ready to take measurements
 
 
  Product Description:  
 
 

Comprehensive source/measure instruments for all your calibration and equipment checking needs at maintenance sites.
Sensors and instruments require a wide variety of operation checks in the field. The CA71 Handy Calibrator is a small, lightweight, multifunction calibrator that can simultaneously source and measure voltage, current, resistance, TC, RTD, frequency, and pulse signals. The CA51 Handy Calibrator is a basic model with the same functions as the CA71 except TC and RTD measurement functions and online communication functions.

  
 
  General Specifications:  
space
   
Signal generating unit response time Approximately 1 sec. (Time between start of voltage change and when the voltage enters accuracy range)
Signal genertating unit voltage limiter Approximately 32 Volts

Signal genertating unit current limiter

Approximately 25 mA
Divided output (m/n) function output= setting x (n/m) x n=0-m;
m=1-9; n ≤ m
Auto-step output function n value sent automatically when n/m value selection is slected (two option: approximately 2.5 seconds/step or 5 seconds/step )
Sweep function Sweep time (two option: approximately 16 seconds or 32 seconds)
Memory function

50 value sets (generated and measured values are storedas value set with the same address (up to 50 value sets can be strored))
Measuring unit maximum input Voltage terminal: 300VAV
AC Current terminal: 120 mADC
Current terminal input protection fuses 125 mA/250V
Measuring unit ground voltage 300 VAC maximum
Measurement display update rate Approximately once per second
Serial Interface Enabled when communication cable (RS-232) is connected
Display Segmented LCD
(approximately 76mm x 48 mm )
Backlight LDE Backlight; auto-off after 1 minute ( from when the light key is turned on)
Consumed power Approximately 7VA
( using 120Vac Adapter)
Auto-power off function Approximately 10 minutes
Applicable standards IEC6101-I; IEC6101-2-31
EM61326: 1997 +1A: 1988
EN55011: 1988, Class B, Group 1
Insulation resistance Across input and output terminal,
500 VDC, 50MΩ or greater
space
  General Specifications:  
spacespace
 

Withstand
Voltage

: Across the input and output terminals, 3.7 kVAC
for one minute
Operating Temp. -20-50 °C, 20-80% RH (no condenstation)
External dimensions : Approx, 190mm(W) X 120mm(H) X 155mm(D)

Weight

 : Approx, 730kg ( Batteries included)

Power supply
: AC adapter 100 to 240V

Accessories
: Signal generating leads cables (1-Red, 2-Black)
Measurement Leads (1-Red, 1-Black)
Carrying Case
Four AA alkaline batteries A1070EBX4
 
  Downloads:  
 
  pdf_pic Downloads:General Specifications  
base
 
© 2006-2007 Electro-Meters.com
Head office located at: 900 McKay Rd., Pickering, Ontario L1W 3X8 (click for map)
Sales: 905.428.3413 | Toll-Free: 800.617.3413 | Fax: 905.428.6086 | E-Mail: sales@electro-meters.com
All descriptions and specifications are subject to change without notice
Privacy Notice | Conditions of Use.
Xhtml validated
 
Scroll down
 
scroll
 
  scroll up  
 
index map web