Signal Modules - 64 Pin
The 64 Pin Signal Receiver Module is made from Ryton® R-7 and will withstand temperatures up to 220°C. The 64 Pin Signal ITA Module is made from engineered resin and will withstand temperatures up to 150°C. Both the ITA and Receiver Modules have molded nomenclature.
Quadra-Paddle Modules 192 Pin
The 192 Pin Signal Modules are made from LCP - Liquid Crystal Polymer Resin, withstanding temperatures up to 260°C. Nomenclature is molded on the Module and mounting hardware is included.
Signal Modules - 96 and 256 Pin
The 96 Pin Signal Modules are made from Ryton R-7, withstanding temperatures up to 220°C. Nomenclature is molded on the Module. The 256 Pin Modules are made from G-10, withstanding temperatures of 115°C. Nomenclature is silk-screened white onto the Module.
Power/Coaxial Modules - 12 Pin
The 12 Pin Power/Coaxial ITA and Receiver Modules are made from GE Supec® and can withstand temperatures of 220°C. Nomenclature is molded on the Module.
16/16 Signal/Power or Coaxial - 32 Pin
Hybrid Module - Virginia Panel Corporation now offers a Signal/Power hybrid module for our 90 Series Receivers and ITAs. The hybrid Module allows for 16 Power and 16 Sense lines in the same module position. Both the Receiver and ITA Module are made from g-10, withstanding temperatures of 115 C. Nomenclature on the Signal/Power module is silk-screened white onto the Modules. The receiver modules are two piece modules (includes a lead-in module cap).
Mini Power/Coaxial Modules - 19 & 76 Pin
The 19 Pin Mini Power and Mini Coaxial Modules are made from Ryton R-7, withstanding temperatures up to 220°C. The 76 Pin Mini Coaxial Modules are made from G-10, withstanding temperatures of 110°C. The receiver modules are two piece modules (includes a lead-in module cap). Power Modules faces are screened red.
18 GHz Coaxial Modules 8 Pin
The 8 Pin 18 GHz ITA and Receiver Modules are made from G-10, withstanding temperatures of 115°C. Nomenclature is silk-screened white onto the Module.
High Frequency, 32 Pin 75 OHM or 20 GHz Coaxial Module
The 32 Pin 20 GHz Coaxial Modules accomodates both 75 OHM and 20 GHz Coaxial Contacts and are made from G-10, withstanding temperatures of 115°C. Nomenclature if silk-screened white onto the Module.
40 GHz Coaxial Modules 8 Pin
The 8 Pin 40 GHz Coaxial Modules are made from Aluminum, withstanding temperatures of 220°C. Nomenclature if silk-screened white onto the Module.
Twinaxial Modules 8 Pin
The 8 Pin Twinaxial ITA and Receiver Modules are made from G-10, withstanding temperatures of 115°C. Nomenclature is silk-screened white onto the Module.
Thermocouple Modules 64 Pin
The 64 Pin Thermocouple Receiver Module is made from Ryton R-7 and will withstand temperatures up to 220°C (the Receiver Module Top Plate is made of G-10 and will withstand temperatures of 115°C). The 64 Pin Thermocouple ITA Module is made from an engineered resin and will withstand temperatures up to 150°C. Nomenclature is silk-screened on the Receiver Module and molded on the ITA Module.
Fiber Optic Modules - 14 Pin
Virginia Panel offers Fiber Optics Modules and Patchcords used in our 90 Series and Gemini Receivers and Interchangeable Test Adapters (ITAs). Both the Receiver and ITA Modules are made of aluminum with nickel plating. The modules have 14 contact positions and include a protective dust cover for the fiber optic termini.
The Fiber Optics termini have an insertion loss of 0.5 dB typical, a return loss of -35 dB and an engagement force of 1.5 lbs. per contact. The fiber optics termini is hermaphroditic, however, the Receiver Patchcord Assembly includes an alignment sleeve necessary for aligning the termini in the module. A cleaning kit and removal tool are available.
Pneumatic Modules, 2, 5 & 10 Contact Positions
VPC offers Pneumatic Modules designed for large diameter (3/8" ID) pneumatic connectors, with positions for 5 panel mount pneumatic/vacuum connectors and occupying 2 Module positions in a Receiver. The bodies of the 3/8" OD connector are made of Chrome-plated brass, pressure/vacuum rated to 250 psi (17.3 Bar) and have operating temperatures between -40°F to 180°F (-40°C to 82°C). VPC also offers Pneumatic Modules designed for smaller diameter (1/8" ID) pneumatic connectors, with positions for 10 panel mount pneumatic/vacuum connectors and occupying 1 module position. The bodies of the 1/8" OD connectors are made of Delrin®, pressure/vacuum rated to 100 psi (6.9 Bar) and have operating
Blank Modules
Blank Modules are made from black anodized aluminum or black PEI thermoplastic and are for unused module slots. The Blank Shielding Module fills a module slot and shields signals between the modules. Blank Modules fit either ITA or Receiver positions.
Module Strain Relief Plate
The Module Strain Relief Plate is made from aluminum with clear chromate finish. It relieves strain on module contacts by securing the wires to the plate. Fastening hardware and cable ties are included. The Module Strain Relief Plate can be used on any 90 Series Receiver Module except 256 pin Signal, 76 pin Mini Coax, 8 pin Twinax and 8 pin 18 GHz. |
.jpg){kind=small}
.jpg){kind=small}
