| |
|
|
|
|
| |
|
|
| |
 |
- 3 1/2 Digit, 1999 max. reading
- HUGE, 1.15" High Digital Display
- Manual Range Selection
- Data Hold
- DC Voltage to 1000V
- AC Voltage to 750V
- AC/DC Current to 10A
- Resistance to 200Mohms
- Temperature Test (Probe Included)
- Capacitance Test (Extension Lead Included)
- Frequency
- Continuity Test
- Diode Check
- Transistor Check
- Auto Polarity
- Overload Protection
- Low Battery Indication
- Auto Power Off
- Double Insulated Case
- CAT I, II, and III Rated
|
|
|
| |
| |
|
|
|
| |
|
|
The Triplett Model 9015-A is a 3 1/2 digit, high reliability, handheld Digital Multimeter
with a 1.15" high Liquid Crystal Display. At its core is an LSI (Large Scale
Integration) integrated circuit which uses dual slope A/D conversion for stability
and accuracy. The meter can measure AC and DC Voltage and Current, Resistance,
Transistor gain, Diode voltage drop, Continuity, Capacitance, Temperature,
and Frequency. Auto Power Off and Hold features enhance convenience, and Overload
protection makes the meter resistant to damage from accidental overloads. |
|
| |
| |
|
|
| |
|
| |
|
| Functions |
|
| DC Voltage : |
5(200mV to 1000V) 0.8% + 1dgt |
| AC Voltage: |
1(2V) 0.8% + 3dgt
2(20V & 200V) 0.8% + 3dgt
1(750V) 1.2% + 3dgt |
| DC Current: |
2(2mA & 20mA) 0.8% + 3dgt
1(200mA) 1.0% + 3dgt
1(10A) 2.0% + 5dgt |
| AC Current: |
1(20mA) 1.2% + 3dgt
1(200mA) 1.5% + 3dgt
1(10A) 3.0% + 5dgt |
| Resistance: |
5(200Ω to 2MΩ) 0.8% + 2dgt
1(20MΩ) 1.0% + 2dgt
1(200MΩ) [5.0% (rdg-10) +10dgt] |
| Frequency: |
1(20kHz) 1.5% + 5dgt |
| Capacitance: |
1(2nF) 5.0% + 10dgt
4(20nF to 20μF) 4.0% + 5dgt |
| Temperature Test (K-type): |
(-4°F to 500°F) 1.0% + 3dgt
(501°F to 1000°F) 5.0% + 3dgt
(1001°F to 1832°F) 6.0% + 3dgt |
| Continuity: |
≤ 100Ω |
| Diode Check: |
√ |
| Transistor Check (hFE): |
√ |
| Total Ranges / Functions: |
33 |
| Safety |
|
| Overload Protection |
mV Range |
200mV AC/DC (250V AC/DC) |
Voltage Ranges
(Except mV) |
1000 VDC CAT I (IEC 1010-1)
750 VAC CAT I (IEC 1010-1)
600 AC/DC CAT II (IEC 1010-1)
300 AC/DC CAT III (IEC 1010-1) |
| Ω Ranges |
250V AC/DC |
| Frequency |
250V AC/DC |
| Diode Test |
250V AC/DC |
| Continuity Beeper |
250V AC/DC |
| Fuse: |
mA Jack |
2A/250V Fuse |
| 10A Jack |
Unfused |
| Agency Approval |
CE
IEC 1010-1 (EN 61010-1)
on Voltage Ranges Only.
See "Overload Protection" above |
| Features |
|
| Range Selection: |
Manual |
| Digital Display: |
3 1/2 Digit, 1999 Count |
| Backlit Display: |
√ |
| Data Hold: |
√ |
| Auto Polarity: |
√ |
| Low Battery Indication: |
√ |
| Physical |
|
| Battery: |
1 - 9 Volt |
| Dimensions: |
3.4 x 7.75 x 1.5 in. w/o boo |
| Weight: |
0.60 lbs. w/o boot |
|
|
| |
| |
|
|
|
|
| |
| |
 General Specifcations |
|
|
|
|
|
 |
|
|
|
|
.jpg){kind=small}
.jpg){kind=small}
