| |
|
|
|
|
| |
|
|
| |
| 
|
|
|
| |
- TrueTrace” - Cadence of tracer tone changes when pair is
momentarily shorted, allowing for definite ID of target wire pair
- Cordless Phone Interface - allows user to use a standard cordless
phone for hands-free “TrueTrace”!
- 3 Methods of Connectivity
- RJ-11 plug for tracing Telephone lines
- RJ-45 Jack for tracing LAN cables
- (trace BNC cables w/ optional RJ-45 to BNC adaptor)
- Alligator clips for connection to stripped wires or terminal panels
- Overload Protected - 120VAC Line Cross Protection on all Functions
- Overload Warning Beeper - alerts user to potential hazards
- Warble/Pulse Tracer Tone - Selectable tone for audible& visual ID using Hound or Hound 2 Probe Inductive Tracer
- High Output Tracer Tone
- Generates 2 of 6 user selectable Tracer Tones
Internal User Selectable Settings - HI/LO Pitch Shift, Warble
Continuous Tracer Tone, On/Off Audio Pilot Tone, On/Off Cadence Shift
- Tone/Battery LED - indicates that Tracer Tone is on and battery is OK
- Audio Pilot Tone - confirms the Tracer Toner signal
- Visual & Audible Continuity Test
- Red/Green Telephone Line Polarity LEDs - also indicates AC/RING Signal
- Supplies “Talk Power” to allow communicating between handsets
(talksets) or powering a telephone
- Line powered in Tone Mode
- Built in Telephone Ringer
- “Power Latch” - prevents accidental turn-ons maximizing battery life
- Magnetic Back - stick the Fox 2 to steel surfaces
- Works with either Hound or Hound 2 Probe Inductive Tracer
- Powered by standard 9 Volt Battery (not included)
|
|
|
| |
| |
|
|
|
| |
|
|
Deluxe Tone Generator with "TrueTrace". A Quick, Easy and Economical way to
trace Wires & Cables of all kinds including:
Electrical Wire, Twisted Pair, LAN Cable, Coax Cable,
Multi-Conductor Cable, Telephone Cable, Speaker Wire,
Alarm Cable, plus many, many more.
The FOX 2 is the next generation version of Triplett’s
popular FOX Tone Generator. The FOX 2 incorporates
numerous improvements, born from years of experience
with the original FOX design, and from working
with our customers to provide cable tracing solutions.
Many new features like TrueTrace and 120VAC Line
Cross protection are time saving and convenient for
the user. In addition, unique features of the original
FOX design, like the Line Powered Tone Generation
mode, are retained. The FOX 2 sets a new standard
for cable tracing technology. |
|
|
| |
| |
|
|
| |
|
| |
|
| Output TONE Level: |
Approx. +3 dBm, 600 ohms,
with fresh battery |
| Load: |
Approx. 13mA at 50VDC (usually less than
off-hook recognition current) |
| Protection: |
Tolerates momentary 120VAC Line Cross
without damage. |
| Tracer Tone (with fresh battery):
|
| Waveform: |
Differentiated Square Wave |
| Level: |
Approx. 12Vpp (+5dBu, 600 Ohm) into an
open circuit (unterminated cable or
telephone line)
Approx. 4Vpp (-20dBm) into a 600 Ohm |
| TrueTrace |
|
| Cadence: |
Slow, approx 2Hz
Fast, approx 7Hz |
| Response Time: |
500 milliseconds max at 100 Ohms or less
1 second max at 10K Ohms |
| Threshold: |
10K Ohms or less |
| |
|
| Protection: |
Tolerates momentary 120VAC Line Cross
without damage. |
| Connections: |
RJ-45 Jack for connection to LAN cable
RJ-45 to RJ-11 Adaptor Cable for connection
to telephone line
Color Coded Alligator Clips for connection
to stripped wires or terminals
RJ-11 Plug for connection to Wireless
Telephone |
| Wireless Telephone Interface: |
| Tracer Tone signal is applied to RJ-11 plug
for connection to wireless phone base
station. Level is approx. -20dBm when
connected to the base station. Loop
current is not supplied. |
| Visual Continuity |
|
| Threshold: |
Typically 2K Ohms w/ new 9V battery |
| Open Circuit Voltage: |
10v max. |
| Test Current: |
30mA max |
| Audible Continuity |
|
| Threshold: |
Typically 500 to 1000 Ohms w/ new battery |
| Open Circuit Voltage: |
10V max. |
| Test Current: |
60mA max |
| Talk Power |
|
| Current with 1K Loop: |
Typically 5mA w/ new 9V battery |
| Open Circuit Voltage: |
10v max. |
| Current (Short Circuit): |
30mA max |
| 120VAC Warning:
|
| When in the OFF / POLARITY mode, the
Red and Green Polarity LEDs light simultaneously when
120VAC is present. The 9V battery may or may not be
installed. In all modes, the beeper sounds in staccato
fashion, i.e. beep-beep-beep-beep etc. The 9V battery
must be good for this to work. The applied voltage must
not exceed 132VAC 60Hz or damage to the product and
user injury may result. |
| |
|
| Cables / Wires Tested: |
Alligator Clips: Typically 10 inches long |
| Power |
|
| Telephone Line Powered Operation: |
Tone Generator
operates without 9V battery installed.
Operates from standard telephone line
(46 to 53V, 400 to 1800 Ohms) in normal
or reverse polarity. |
| Battery : |
Standard 9V Alkaline Battery |
| Battery Life: |
Approx. 100 hours continuous in Tone
Generator mode |
| Weight: |
Typically 6 ounces including battery |
| Size: |
3.75"H x 2.5"W x 1.25"T |
|
| |
| |
|
|
|
|
| |
| |
 General Specifcations |
|
|
|
|
|
 |
| |
Related urls: |
|
|
| |
- PairMaster,
LAN Cable Test Set
- WireMaster
RJ-45, LAN Cable Test Sets
- WireMaster
XR-2 Series, LAN Cable Test Sets
- WireMaster
XR-5 Series, 5 cable Testers
- Line-Bug 4,
Phone / LAN
Line Tester
- TDR
LAN, Cable Fault Finder
- TDR,
Cable Fault Finder
- WireMaster COAX
8-Way Coax Cable Mapper
- WireMaster FOX 2,
Coaxial Cable Mapper
- WireMaster FOX,
Coaxial Cable Mapper
- Hound 3 Probe, Inductive Tracer
|
| |
|
|
|
|
|
|
|
.jpg){kind=small}
.jpg){kind=small}
