Electro-Meters: Texmate PL-B101D40 Bargraph Relay Meters


>		Controllers and Indicators



>		Enclosures

>		Fiber Optic Testers

>		Mass Interconnect Solutions

>		Motor Testing Equipment

>		Panel Meters (Analog)
>		Panel Meters (Digital)

>		Portable Test Instruments

>		Power Sources (AC)

>		Power Protection

>		Pressure Instruments

>		Shunts

>		Temperature Sensors, Transmitters and Sealing Assemblies

>		Test and Measurement Instrumentation

>		Transducers

>		Transformers

Texmate Inc. Model PL-B101D40, 3/32 DIN, 101 Segment Bargraph Relay Meters


	< Links >

Characteristics :

The bargraph can display, full scale, any desired portion of the digital reading.
Bargraph center zero function.
Four programmable setpoints.
Setpoint 1 has delay-onmake and delay-on-break plus a special “pump on pump off” mode that creates a Hysteresis Band between Software Features SP1 and SP2.
Relay activation can be selected to occur above (hi) or below (Lo) each setpoint.
Digital display blanking.
Decimal point setting.
Four-level brightness control of the bargraph and digital display.

Product Description:

Red, 101 segment bargraph, with a 4-digit LED digital display for monitoring, measurement, and control applications, mounted in a 24x144 case.

General Features:

External transmitters or signal conditioners can be eliminated by direct connection of the sensor output to more than 38 Plug-in Input Signal Conditioners that include:

24 V DC excitation is available to power external transmitters and 5 or 10 V DC excitation is available for resistance bridge type sensors such as Load Cells and Pressure Transducers.
A red, 101 segment high brightness bargraph.
Red 4-digit LED display with a range of 1999 to 9999 (12000 counts).
Front panel LED annunciators provide indication of setpoint status.
Two 10 Amp Form C, and two 5 Amp Form A relays available.
Auto-sensing AC/DC power supply. For voltages between 85-265 V AC/95-370 V DC (PS1).
Provision to connect an external programming lockout switch.
Provision for external DIM switch to reduce the brightest display setting by 50%.
Automatic intelligent averaging smooths noisy signals, while providing a fast display response to real level changes.

More than 38 different
Plug-in I-Series Modular Input Signal Conditioners are approved for Texmate’s Leopard Family of meters.

Specifications :

Display
Display:	4 digit 0.27" Red LED display (std).
Display Color:	Red
Digital Display Range:	-1999 to 9999 counts.
Bargraph:	101 segment, red vertical (std),
Annunciators:	4 red LEDs on front panel; one per setpoint.
Positive Overrange:	Bargraph and top segments of digital display flash.
Negative Overrange:	First segment of bargraph and bottom segments of digital display flash.

A/D Converter:	14 bit single slope
Accuracy:	±(0.05% of reading + 2 counts)
Temp. Coeff.:	100 ppm/°C (Typical)
Warm up time::	2 minutes.
Conversion Rate:	3 to 16 conversions per second

Relay Output:	Two 5A form A and two 10A Form C relays
Analog Output :	Isolated 16 bit user scalable mA or V
OIC (mA out)	4-20 mA @ 0 to 500Ω max loop resistance
OIV (volts out)	0-10 V DC @ 500 Ω or higher resistance
Power Supply:	AC/DC Auto sensing wide range supply
PS1 (std):	85-265 VAC / 95-370 VDC @ 2.5W max 4.2W
PS2	18-48 VAC / 10-72 VDC @ 2.5W max 4.2W
General:
Operating Temp.:	0 to 60 °C
Storage Temp:	–20 °C to 70 °C.
Relative Humidity:	95% (non condensing)
Case Dimensions:	3/32 DIN, Bezel: 24x144mm (0.95”x5.69”), Depth behind bezel 128.6 mm (5.08"), Plus 14 mm (0.55”) for connector.
Weight:	9.5 oz., 12 oz when packed

Downloads:

Related urls: