Texmate Model FL-B101Q

3/32 DIN, 101-Segment Bargraph Relay Meters>

space
Texmate FL-B101Q Bargraph Relay Meters
Characteristics :
  • 101 segment bargraph
  • Bargraph center zero function.
  • Four programmable setpoints.
  • Relays activation can be selected to occur above (HI) or below (LO) each setpoint.
  • Decimal point setting.
Product Description:

Smart mono-color digital bargraph with four fully programmable set points for monitoring, measurement, and control applications.

space
  • Two 10 Amp Form C, and two 5 Amp Form A relays available
  • Auto-sensing AC/DC power supply. For voltages between 85-265 V AC / 95-370 V DC (PS1) or 15-48 V AC / 10-72 V DC (PS2).
  • Optional isolated 16 bit analog output. User or factory scalable to 4 to 20 mA, 0 to 20 mA or 0 to 10 V across any desired span from ± one bar to the full scale range
  • Provision to connect an external programming lockout switch.
  • Optional NEMA-4 front cover.
  • 24 V DC excitation is available to power external 4/20 mA transmitters and 5 or 10 V DC excitation is available for resistance bridge type sensors
  • More than 38 differentPlug-in I-Series Input Signal Conditioners are approved for Texmate’s Leopard Family of meters.
Specifications :
space
space
Display
Bargraph: 101 segment 4” vertical (std),horizontal (optn), red (std), green (optn), one red one green (opt)
Annunciators: 4 red LEDs on front panel; one per setpoint.
Positive Overrange: Bargraph and top segments of digital display flash.
Negative Overrange: First segment of bargraph and bottom segments of digital display flash.
A/D Converter: 14 bit single slope
Accuracy: ±(0.05% of reading + 2 counts)
Temp. Coeff.: 100 ppm/°C (Typical)
Warm up time:: 2 minutes.
Conversion Rate: 10 conversions per second (Typical)
Relay Output: Two 5 Amp Form A relays and Two 10 Amp Form C relays
Analog Output : Isolated 16 bit user scalable mA or V
OIC (mA out) 4-20 mA @ 0 to 500Ω max loop resistance
OIV (volts out) 0-10 V DC @ 500 Ω or higher resistance
Power Supply: AC/DC Auto sensing wide range supply
PS1 (std): 85-265 VAC / 95-370 VDC @ 2.5W max 4.2W
PS2 15-48 VAC / 10-72 VDC @ 2.5W max 4.2W
General:
Operating Temp.: 0 to 60 °C
Storage Temp: –20 °C to 70 °C.
Relative Humidity: 95% (non condensing)
Case Dimensions: 3/32 DIN, Bezel: 36×144 mm(1.42”x5.69”)Depth behind bezel: (4.64″) 117.5 mm Plus 10 mm (0.39”) for Right-angled connector, or plus 18.3 mm (0.72”) for Straight-thru connector, or plus 26.5 mm (1.05”) for Push-On connector.
Weight: 9.5 oz., 12 oz when packed
space
base
spacespace
Related urls:
weblink
    web