| |
|
|
|
|
| |
|
| |
| |
 |
- The bargraph can display, full
scale, any desired portion of
the digital reading.
- Bargraph center zero function.
- Four programmable setpoints
with adjustable Hysteresis.
- Setpoint 1 has delay-on-make
and delay-on-break plus a
special “pump on pump off” mode that creates a
Software Features
Hysteresis Band between
SP1 and SP2.
- Relay activation can be
selected to occur above (hi) or
below (Lo) each setpoint.
- Digital display blanking.
- Decimal point setting.
- Four-level brightness control
accessed by the button
and adjusted by the button.
|
|
|
| |
| |
|
|
|
| |
|
|
Now featuring New Version 2.0 software
with one-color Brightness control, this smart
Tricolor or Mono-color digital bargraph has four
fully programmable set points for monitoring,
measurement, and control applications |
|
|
| |
| |
|
|
|
|
| |
| |
- External transmitters or signal conditioners can be eliminated
by direct connection of the sensor output to more than
40 Plug-in Input Signal Conditioners that include:
| AC/DC Current |
Pressure |
Resistance |
| AC/DC Voltage |
Process |
Temperature* |
| Load Cell |
Prototype |
4 to 20 mA |
| |
|
|
|
- Optional isolated 16 bit analog output. User or factory scalable
to 4 to 20 mA, 0 to 20 mA or 0 to 10 V across any desired digital
span from ± one count to the full scale range of – 1999 to
9999 (12000 counts).
- A Programmable Tricolor (Red-Green-Orange) or mono color
(red or green), 101 segment high brightness bargraph.Vertical
or optional horizontal format.
- Red 4-digit LED display with a range of -1999 to 9999
(12000 counts). Optional green digital display.
- Front panel LED annunciators provide indication of setpoint status.
- Two 10 Amp Form C, and two 5 Amp Form A relays available
- Auto-sensing AC/DC power supply. For voltages between
85-265 V AC / 95-370 V DC (PS1) or 18-48 V AC / 10-72 V DC (PS2).
- 24 V DC excitation is available to power external 4/20mA
transmitters and 5 or 10 V DC excitation is available for
resistance bridge type sensors.
- Provision to connect an external programming lockout switch.
- Provision for external DIM switch to reduce the brightest
display setting by 50%.
- Optional NEMA-4 front cover.
- Automatic intelligent averaging, smooths noisy signals while
providing a fast display response to real level changes.
- More than 38 different
Plug-in I-Series Modular Input Signal Conditioners
are approved for Texmate’s Leopard Family of
meters.
|
| |
| |
|
|
| |
|
| |
|
| Display
|
| Display: |
4 digit 0.31" LED |
| Display Color: |
Red, Green or Super Bright Red
(optn) |
| Digital Display Range: |
-1999 to 9999 counts. |
| Bargraph: |
101 segment 4” red vertical (std), |
| Annunciators: |
4 red LEDs on front panel; one per setpoint. |
| Positive Overrange: |
Bargraph and top segments of digital
display flash. |
| Negative Overrange: |
First segment of bargraph and bottom
segments of digital display flash. |
| |
| A/D Converter: |
14 bit single slope |
| Accuracy: |
±(0.05% of reading + 2 counts) |
| Temp. Coeff.: |
100 ppm/°C (Typical) |
| Warm up time:: |
2 minutes. |
| Conversion Rate: |
10 conversions per second (Typical) |
| |
| Relay Output: |
Two 5 Amp Form A relays and Two
10 Amp Form C relays |
| Analog Output : |
Isolated 16 bit user scalable mA or V |
| OIC (mA out) |
4-20 mA @ 0 to 500Ω max loop resistance |
| OIV (volts out) |
0-10 V DC @ 500 Ω or higher resistance |
| Power Supply: |
AC/DC Auto sensing wide range supply |
| PS1 (std): |
85-265 VAC / 95-370 VDC @ 2.5W max 4.2W |
| PS2 |
18-48 VAC / 10-72 VDC @ 2.5W max 4.2W |
General: |
| Operating Temp.: |
0 to 60 °C
|
| Storage Temp: |
–20 °C to 70 °C. |
| Relative Humidity: |
95% (non condensing) |
| Case Dimensions: |
9/64 DIN (Bezel 36Wx144Hmm)
Depth behind bezel (5.83") 148mm
Plus (0.7”) 18mm for connectors |
| Weight: |
9.5 oz., 12 oz when packed |
|
|
| |
| |
|
|
|
|
| |
| |
 General Specifcations |
|
|
|
|
|
 |
| |
Related urls: |
|
|
| |
- Model BL-40, 96x24mm Low Profile, 4 Digit, Digital Relay Meters
- Model BL-40F, 96x24mm
4 Digit, Frequency Digital Relay Meters
- Model BL-40H, 96x24mm
4 Digit, Temperature Digital Relay Meters
- Model BL-40PSF, 96x24mm
4 Digit, Scale Factor Digital Relay Meters
- Model BL-40RPM, 96x24mm
4 Digit, RPM Digital Relay Meters
- Model BL-B51D40, 24x96mm
51 LED Segment and 4 Digit Bargraph
- Model DL-40, 1/8 DIN
4 Digit, Digital Relay Panel Meters
- Model DL-40F, 1/8 DIN, 4 Digit,
Temperature Digital Relay Meters
- Model DL-40H, 1/8 DIN, 4 Digit,
Temperature Digital Relay Meters
- Model DL-40PSF, 1/8 DIN,
4 Digit, Scale Factor Digital Panel Meters
- Model DL-40RPM, 1/8 DIN,
4 Digit, RPM Digital Relay Meters
- Model FL-B101D40, 9/64 DIN,
101 Segment, 4 Digit 0.32” High LEDs
- Model FL-B101D40F, 9/64 DIN,
101 Segment, 4 Digit Frequency Bargraph
- Model FL-B101D40H, 9/64 DIN,
101 Segment, 4 Digit Temp. Bargraph
- Model FL-B101D40PS, 9/64 DIN,
101 Seg. , 4 Dgt Scale Factor Bargraph
- Model FL-B101Q, 3/32 DIN,
101 Segment Bargraph Relay Meters
- Model FL-B202Q, 3/32 DIN,
2 x 101 Segment Bargraph Relay Meters
- Model PL-B101D40, 3/32 DIN,
101 Segment Bargraph Relay Meters
|
| |
|
|
|
|
|
|
|
.jpg){kind=small}
.jpg){kind=small}
