| |
|
|
|
|
| |
|
| |
| |

|
|
|
| |
- Three-button programming from the front panel
(UP, DOWN and PROGRAM buttons).
- Three front panel selectable ranges.
- Front panel selectable four-level brightness control of digital display,
and setpoint LEDs.
- Four programmable setpoints.
- Relay activation can be selected to occur above (HI) or below
(LO) each setpoint.
- Hysteresis setting for all three setpoints. Delay on make and
delay on break for SP1 and SP2.
- Peak and Valley. View and Reset.
|
|
|
| |
| |
|
|
|
| |
|
|
An economically smart meter relay with
programmable scale factor and offset with
isolated 4 to 20 mA output retransmission capability
for measurement and control applications in a 96x48mm case. |
|
|
| |
| |
|
|
|
|
| |
| |
- External transmitters or signal conditioners can be eliminated
by direct connection of the sensor output to more than
38 Plug-in Input Signal Conditioners that include:
| AC/DC Current |
Pressure |
Resistance |
| AC/DC Voltage |
Process |
Temperature* |
| Load Cell |
Prototype |
4 to 20 mA |
| |
|
|
| *See models DL-40H for higher accuracy digitally linearized
thermocouple and RTD |
|
|
|
- Optional isolated 16 bit analog output. User or factory scalable
to 4 to 20 mA, 0 to 20 mA or 0 to 10 V across any desired
digital span from ± one count to the full scale range of – 1999
to 9999 (12000 counts).
- Auto-sensing AC/DC power supply. For voltages between
85-265 V AC / 95-370 V DC (PS1) or 15-48 V AC / 10-72 V DC (PS2).
24 V DC excitation is available to power external transmitters
and 5 or 10 V DC excitation is available for resistance bridge
type sensors such as Load Cells and Pressure Transducers.
- Standard red or optional green or super bright red 4-digit LED
with display range –1999 to 9999 (12000 counts).
- Red or green 0.8” LED large display option
- Four annunciator LEDs provide front panel alarm status
indication for up to four setpoints.
- Two 10 Amp Form C and two 5 Amp Form A relays, or
optionally four 5 Amp Form A relays are available.
- Automatic intelligent averaging smooths noisy signals, while
providing a fast display response to real level changes.
- More than 45 different
Plug-in I-Series Modular Input Signal Conditioners
are approved for Texmate’s Leopard Family of
meters.
|
| |
| |
|
|
| |
|
| |
|
| Display |
| Display: |
4 Digit 0.56” or optional 0.8"LEDs |
| Display Color: |
Red LED display (std),
0.56” or 0.8" Red, Green or Super
Bright Red (optn) |
| Digital Display Range: |
-1999 to 9999 counts. |
| Annunciators: |
3 red LEDs on front panel; one per setpoint. |
| Positive Overrange: |
Top segments of digital display flash |
| Negative Overrange: |
Bottom segments of digital display flash |
| |
| A/D Converter: |
14 bit single slope |
| Accuracy: |
±(0.05% of reading + 2 counts) |
| Temp. Coeff.: |
100 ppm/°C (Typical) |
| Warm up time:: |
2 minutes. |
| Conversion Rate: |
5 conversions per second (Typical) |
| |
| Relay Output: |
Two 5 Amp Form A relays or Two 10 Amp
Form C, and one 5 Amp Form A relay. |
| Analog Output : |
Isolated 16 bit user scalable mA or V |
| OIC (mA out) |
4-20 mA @ 0 to 500Ω max loop resistance |
| OIV (volts out) |
0-10 V DC @ 500 Ω or higher resistance |
| Power Supply: |
AC/DC Auto sensing wide range supply |
| PS1 (std): |
85-265 VAC / 95-370 VDC @ 2.5W max 3.2W |
| PS2 : |
15-48 VAC / 10-72 VDC @ 2.5W max 3.2W |
General: |
| Operating Temp.: |
0 to 60 °C
|
| Storage Temp: |
–20 °C to 70 °C. |
| Relative Humidity: |
95% (non condensing) |
| Case Dimensions: |
1/8 DIN, Bezel: 96x48 mm (3.78”x1.89”)
Depth behind bezel: 117 mm (4.61”)
Plus 11.8 mm (0.47”) for Right-angled
connectors, or plus 20 mm (0.79”) for
Straight-thru connector. |
| Weight: |
6.5 oz., 8.5 oz when packed |
|
|
| |
| |
|
|
|
|
| |
| |
General Specifcations |
|
|
|
|
|
 |
| |
Related urls: |
|
|
| |
- Model BL-40, 96x24mm Low Profile, 4 Digit, Digital Relay Meters
- Model BL-40F, 96x24mm
4 Digit, Frequency Digital Relay Meters
- Model BL-40H, 96x24mm
4 Digit, Temperature Digital Relay Meters
- Model BL-40PSF, 96x24mm
4 Digit, Scale Factor Digital Relay Meters
- Model BL-40RPM, 96x24mm
4 Digit, RPM Digital Relay Meters
- Model BL-B51D40, 24x96mm
51 LED Segment and 4 Digit Bargraph
- Model DL-40, 1/8 DIN
4 Digit, Digital Relay Panel Meters
- Model DL-40F, 1/8 DIN, 4 Digit,
Temperature Digital Relay Meters
- Model DL-40H, 1/8 DIN, 4 Digit,
Temperature Digital Relay Meters
- Model DL-40PSF, 1/8 DIN,
4 Digit, Scale Factor Digital Panel Meters
- Model DL-40RPM, 1/8 DIN,
4 Digit, RPM Digital Relay Meters
- Model FL-B101D40, 9/64 DIN,
101 Segment, 4 Digit 0.32” High LEDs
- Model FL-B101D40F, 9/64 DIN,
101 Segment, 4 Digit Frequency Bargraph
- Model FL-B101D40H, 9/64 DIN,
101 Segment, 4 Digit Temp. Bargraph
- Model FL-B101D40PS, 9/64 DIN,
101 Seg. , 4 Dgt Scale Factor Bargraph
- Model FL-B101Q, 3/32 DIN,
101 Segment Bargraph Relay Meters
- Model FL-B202Q, 3/32 DIN,
2 x 101 Segment Bargraph Relay Meters
- Model PL-B101D40, 3/32 DIN,
101 Segment Bargraph Relay Meters
|
| |
|
|
|
|
|
|
|