Electro-Meters: Texmate Model BL-40H , Low Profile Temperature DPMs


>		Controllers and Indicators



>		Enclosures

>		Fiber Optic Testers

>		Mass Interconnect Solutions

>		Motor Testing Equipment

>		Panel Meters (Analog)
>		Panel Meters (Digital)

>		Portable Test Instruments

>		Power Sources (AC)

>		Power Protection

>		Pressure Instruments

>		Shunts

>		Temperature Sensors, Transmitters and Sealing Assemblies

>		Test and Measurement Instrumentation

>		Transducers

>		Transformers

Texmate Inc. Model BL-40H, 96x24mm 4 Digit, Temperature Digital Relay Meters


	< Links >


Characteristics:


Three-button programming from the front panel Three front panell selectable ranges. Four-level brightness control of digital display, and setpoint LEDs. Three programmable setpoints. Relay activation can be selected to occur above (HI) or below (LO) each setpoint. Hysteresis setting for all three setpoints. Delay on make and delay on break for SP1 and SP2. Peak and Valley. View and Reset.

Product Description:

An economically smart temperature meter relay for J, K, R, and T type thermocouple and RTD inputs.

General Features:

Thermocouple (J, K, R and T types) or RTD (Pt-100. 385 and 392 curves. 3 wire/4wire). Digitally Linearized.
Optional isolated 16 bit analog output. User or factory scalable to 4 to 20 mA, 0 to 20 mA or 0 to 10 V across any desired digital span from ± one count to the full scale range of – 1999 to 9999 (12000 counts).
Auto-sensing AC/DC power supply. For voltages between 85-265 V AC / 95-370 V DC (PS1) or 15-48 V AC / 10-72 V DC (PS2).
Standard red or optional green or super bright red 4-digit LED
Three annunciator LEDs provide front panell alarm status indication for up to three setpoints.
One 10 Amp Form C and one 5 Amp Form A relay, or up to three 5 Amp Form A relays are available.
When analog output is installed, one 10 Amp Form C or two 5 Amp Form A relays can be supported.

There are 2 different Plug-in Modular Input Signal Conditioners for this specialized temperature only member of the Leopard Family. IT10 is for J, K, T and R thermocouples. IT11 is for 3 wire/4 wire Pt- 100 RTD inputs.

Specifications :

Display
Display:	4 Digit 0.56” LEDs
Resolution:	1° / 0.1°
Display Color:	Red, Green or Super Bright Red (optn)
Digital Display Range:	-1999 to 9999 counts.
Annunciators:	3 red LEDs on front panell; one per setpoint.
Positive Overrange:	Top segments of digital display flash
Negative Overrange:	Bottom segments of digital display flash

A/D Converter:	14 bit single slope
Accuracy:	±(0.05% of reading + 2 counts)
Temp. Coeff.:	100 ppm/°C (Typical)
Warm up time::	2 minutes.
Conversion Rate:	5 conversions per second (Typical)

Relay Output:	Three 5 Amp Form A relays or one 10 Amp Form C, and one 5 Amp Form A relay.
Analog Output :	Isolated 16 bit user scalable mA or V
OIC (mA out)	4-20 mA @ 0 to 500Ω max loop resistance
OIV (volts out)	0-10 V DC @ 500 Ω or higher resistance
Power Supply:	AC/DC Auto sensing wide range supply
PS1 (std):	85-265 VAC / 95-370 VDC @ 2.5W max 3.2W
PS2 :	15-48 VAC / 10-72 VDC @ 2.5W max 3.2W
General:
Operating Temp.:	0 to 60 °C
Storage Temp:	–20 °C to 70 °C.
Relative Humidity:	95% (non condensing)
Case Dimensions:	1/16 DIN Bezel 96x24mm Depth behind bezel 122.2mm (4.83") Plus 12.7mm (0.5”) for Right-angled connectors
Weight:	7 oz., 9 oz when packed.

Downloads:

Related urls: