| |
|
|
|
|
| |
|
| |
| |

|
|
|
| |
- Three-button programming from the front panel
- Three front panel selectable ranges.
- Four-level brightness control of digital display, and setpoint LEDs.
- Three programmable setpoints.
- Relay activation can be selected to occur above (HI) or below
(LO) each setpoint.
- Hysteresis setting for all three setpoints. Delay on make and
delay on break for SP1 and SP2.
- Peak and Valley. View and Reset.
|
|
|
| |
| |
|
|
|
| |
|
|
An economically smart programmable Frequency meter relay with isolated 4 to 20 mA retransmission or
control loop output capability for measurement and control applications in a 96x24mm case. |
|
|
| |
| |
|
|
|
|
| |
| |
- Frequency input. Easily user scaled.
- For frequency measurements, the recommended meter is the
BL-40F meter which has been designed specifically for
that purpose.
- Three frequency ranges of 99.99Hz, 999.9Hz and 9999Hz.
- Optional isolated 16 bit analog output. User or factory scalable to 4 to 20 mA, 0 to 20 mA or 0 to 10 V across any desired
digital span from ± one count to the full scale range of – 1999
to 9999 (12000 counts).
- Auto-sensing AC/DC power supply. For voltages between 85-
265V AC / 95-370 V DC (PS1) or 15-48 V AC / 10-72 V DC (PS2).
- Standard red or optional green or super bright red 4-digit LED
- Three annunciator LEDs provide front panel alarm status
indication for up to three setpoints.
- Optional relays. One 10 Amp Form C and one 5 Amp Form A
relay, or up to three 5 Amp Form A relays are available.
- When analog output is installed, one 10 Amp Form C or
two 5 Amp Form A relays can be supported.
- There are 2 Plug-in Modular Input Signal
Conditioners for this specialized frequency only
member of the Leopard Family: IF05 & IF08.
|
|
| |
| |
|
|
| |
|
| |
|
| Display |
| Display: |
4 Digit 0.56” LEDs |
| Resolution: |
99.99 / 999.9/9999Hz . . . (High Accuracy) |
| Display Color: |
Red, Green or Super Bright Red
(optn) |
| Digital Display Range: |
-1999 to 9999 counts. |
| Annunciators: |
3 red LEDs on front panel; one per setpoint. |
| Positive Overrange: |
Top segments of digital display flash |
| Negative Overrange: |
Bottom segments of digital display flash |
| |
| A/D Converter: |
14 bit single slope |
| Accuracy: |
±(0.05% of reading + 2 counts) |
| Temp. Coeff.: |
100 ppm/°C (Typical) |
| Warm up time:: |
2 minutes. |
| Conversion Rate: |
5 conversions per second (Typical) |
| |
| Relay Output: |
Three 5 Amp Form A relays or one 10 Amp
Form C, and one 5 Amp Form A relay. |
| Analog Output : |
Isolated 16 bit user scalable mA or V |
| OIC (mA out) |
4-20 mA @ 0 to 500Ω max loop resistance |
| OIV (volts out) |
0-10 V DC @ 500 Ω or higher resistance |
| Power Supply: |
AC/DC Auto sensing wide range supply |
| PS1 (std): |
85-265 VAC / 95-370 VDC @ 2.5W max 3.2W |
| PS2 : |
15-48 VAC / 10-72 VDC @ 2.5W max 3.2W |
General: |
| Operating Temp.: |
0 to 60 °C
|
| Storage Temp: |
–20 °C to 70 °C. |
| Relative Humidity: |
95% (non condensing) |
| Case Dimensions: |
1/16 DIN Bezel 96x24mm
Depth behind bezel 122.2mm (4.83")
Plus 12.7mm (0.5”) for Right-angled
connectors |
| Weight: |
7 oz., 9 oz when packed. |
|
|
| |
| |
|
|
|
|
| |
| |
General Specifcations |
|
|
|
|
|
 |
| |
Related urls: |
|
|
| |
- Model BL-40, 96x24mm Low Profile, 4 Digit, Digital Relay Meters
- Model BL-40F, 96x24mm
4 Digit, Frequency Digital Relay Meters
- Model BL-40H, 96x24mm
4 Digit, Temperature Digital Relay Meters
- Model BL-40PSF, 96x24mm
4 Digit, Scale Factor Digital Relay Meters
- Model BL-40RPM, 96x24mm
4 Digit, RPM Digital Relay Meters
- Model BL-B51D40, 24x96mm
51 LED Segment and 4 Digit Bargraph
- Model DL-40, 1/8 DIN
4 Digit, Digital Relay Panel Meters
- Model DL-40F, 1/8 DIN, 4 Digit,
Temperature Digital Relay Meters
- Model DL-40H, 1/8 DIN, 4 Digit,
Temperature Digital Relay Meters
- Model DL-40PSF, 1/8 DIN,
4 Digit, Scale Factor Digital Panel Meters
- Model DL-40RPM, 1/8 DIN,
4 Digit, RPM Digital Relay Meters
- Model FL-B101D40, 9/64 DIN,
101 Segment, 4 Digit 0.32” High LEDs
- Model FL-B101D40F, 9/64 DIN,
101 Segment, 4 Digit Frequency Bargraph
- Model FL-B101D40H, 9/64 DIN,
101 Segment, 4 Digit Temp. Bargraph
- Model FL-B101D40PS, 9/64 DIN,
101 Seg. , 4 Dgt Scale Factor Bargraph
- Model FL-B101Q, 3/32 DIN,
101 Segment Bargraph Relay Meters
- Model FL-B202Q, 3/32 DIN,
2 x 101 Segment Bargraph Relay Meters
- Model PL-B101D40, 3/32 DIN,
101 Segment Bargraph Relay Meters
|
| |
|
|
|
|
|
|
|