• TEXMATE

FL-B101D40F, 24x96mm Bargraph Meters

101 segment bargraph with a 4-digit, 1.32" high LED digital display for frequency measurement and moitoring applications
Texmate FL-B101D40 digital edgewise bargraph meters

Features

  • The bargraph can display, full scale, any desired portion of the digital reading.
  • Bargraph center zero function.
  • Four programmable setpoints with adjustable Hysteresis.
  • Setpoint 1 has delay-on-make and delay-on-break plus a special “pump on pump off” mode that creates a Software Features Hysteresis Band between SP1 and SP2.
  • Relay activation can be selected to occur above (hi) or below (Lo) each setpoint.
  • Digital display blanking.
  • Decimal point setting.
  • Four-level brightness control accessed by the button and adjusted by the button.

Description

Now featuring New Version 2.0 software with one-color Brightness control, this smart Tricolor or Mono-color digital bargraph has four fully programmable set points for monitoring, measurement, and control applications

IIII [+] Read More
  • Frequency input. Easily user scaled
  • Optional isolated 16 bit analog output. User or factory scalable to 4 to 20 mA, 0 to 20 mA or 0 to 10 V across any desired digital span from ± one count to the full scale range of – 1999 to 9999 (12000 counts)
  • A Programmable Tricolor (Red-Green-Orange) or mono color (red or green), 101 segment high brightness bargraph. Vertical or optional horizontal format
  • Red 4-digit LED display with a range of -1999 to 9999 (12000 counts). Optional green digital display
  • Front panel LED annunciators provide indication of setpoint status.
  • Two 10 Amp Form C, and two 5 Amp Form A relays available
  • Auto-sensing AC/DC power supply. For voltages between 85-265 V AC / 95-370 V DC (PS1) or 18-48 V AC / 10-72 VDC (PS2).
  • 24 V DC excitation is available to power external 4/20mA transmitters and 5 or 10 V DC excitation is available for resistance bridge type sensors.
  • Provision to connect an external programming lockout switch.
  • Provision for external DIM switch to reduce the brightest display setting by 50%
  • Optional NEMA-4 front cover
  • Automatic intelligent averaging, smooths noisy signals while providing a fast display response to real level changes.
 
  • Literature
  • Specifications

Literature and Technical Information

pdf icon

Digital Edgewise Bargraph Meters

FL-B101D40F

++ FL-B101-D40F Specifications| Brochure (3.8 MB)
Model: Texmate FL-B101D40F Series
Display
Display: 4 digit 0.31" Red LED display (std)., green optional
Bargraph: 101 segments 4” red vertical (std), green or tricolor (optn), horizontal (optional)
Input Specs: Depends on Input signal conditioner
Specific Accuracies
Accuracy: ±0.05% of reading + 2 counts
General specifications
A/D Converter: 14 bit single slope
Temp. Coeff: 100 ppm/°C (Typical)
Warm up time: 2 minutes
Conversion Rate: 10 conversions per second (Typical)
Polarity: Assumed positive. Displays negative
Positive Overrange: Bargraph and top segments of digital display flash
Negative Overrange First segment of bargraph and bottom segments of digital display flash
Analog Output: Isolated 16 bit user scalable mA or V
OIC (mA out)…………4-20 mA @ 0 to 500Ω max loop resistance
OIV (volts out)……….. 0-10 V DC @ 500 Ω or higher resistance
Power Supply: AC/DC Auto sensing wide range supply
PS1 (std)……………..85-265 VAC / 95-370 VDC @ 2.5W max 4.2W
PS2……………………..18-48 VAC / 10-72 VDC @ 2.5W max 4.2W
Relay Output: Two 5 Amp Form A relays and Two 10 Amp Form C relays
Environment
Operating Temp.: 0 to 60°C
Storage Temp: –20°C to 70°C
Relative Humidity: 95% (non condensing)
Case Dimensions
Case: 9/64 DIN (Bezel 36Wx144Hmm)
Case Depth: Depth behind bezel (5.83") 148mm Plus (0.7”) 18mm for connectors
Weight: 9.5 oz., 12 oz when packed