| |
|
|
|
|
| |
|
| |
| |
|
|
|
| |
- 3 1/2 and 4 Digit, 0.56” high Red LEDs
- Optional High efficiency green or High bright red LEDs
- Ideal for OEM applications
- Accurate and Economically priced
- Dedicated to a specific application
- Quick, easy mounting into any panel thickness
|
|
|
| |
| |
|
|
|
| |
|
|
The UM-Series features user selectable 100 to 120 V AC or 200 to 240 V AC, 50/60 Hz isolated linear
power supply. As an option an auto sensing isolated AC/DC 12 to 24 V AC, 9 to 36 V DC switching
power supply or a 24 V AC isolated linear power supply may be ordered.
Standard 0.56” red LED display with optional Hi-efficiency green or super bright red 0.56” or 0.8” (3.5 or
4 digit only) LEDs
n.b. Special meter inputs can be factory scaled. |
|
|
| |
| |
|
|
|
|
| |
| |
- The UM-Series NEMA case style is complementary
to Texmate’s Classic RP-Series.
For economy, each UM model is dedicated
to a specific application. UMs are ideal for
upgrading or replacing the traditional USA
NEMA case panel meters presently in use
- The standard meter is provided with TB-KIT screw terminal
blocks and insulated quick- disconnects. For the greatest convenience
and ease of use, order the optional pre-configured
Push-On screw terminal connectors
|
|
| |
| |
|
|
|
|
| |
| |
| AC Current |
| UM-35ACI1 |
AC A, Scaled RMS. 1 Amp (built-in shunt), 3.5 digit |
| UM-35ACI5 |
AC A, Scaled RMS. 5 Amp (built-in shunt) ), 3.5 digit |
| AC Voltage |
| UM-35AC |
AC V, Scaled RMS. 199.9 / 700 V AC, 3.5 digit |
| UM-40AC |
AC V, Scaled RMS 700 V AC,4 digit |
| AC Line Frequency |
| UM-35HZ |
Line Hz 199.9 or 500 Hz up to 700 V AC input, 3.5 digit |
| DC Voltage |
| UM-35 |
DC V ±2 / 20 V DC or optionally ±2 / 200 V DC, 3.5 digit |
| UM-35MV |
DC mV ±50 mV and ±100 mV inputs to suit ext DC curr. shunts, 3.5 digit |
| UM-45 |
DC V ±2 / 20 V DC or optionally ±2 / 200 V DC, 4.5 digit |
| UM-45MV |
DC ±50 mV, ±100 mV, or ±200 mV inputs to suit DC curr. shunts, 4.5 digit |
| Process 4 to 20 mA |
| UM-35CL |
1.4 V loop drop, scalable from –1999 to +1999, 3.5 digit |
| UM-35CLE |
Built-in 24 V DC loop excitation), 3.5 digit |
| Pressure |
| UM-35P |
For pressure transducers with 2 mV / V to 20 mV / V outputs with 5 V DC exc., 3.5 digit |
| Temperature |
| UM-35J |
J therm. input, 1° res., order °C or °F (1? Res. 760?C or 1400?F), 3.5 digit |
| UM-35K |
K therm. input, 1° res., order °C or °F (1? Res. 1260?C or 1999?F), 3.5 digit |
| UM-35RTD |
3-wire, 100-ohm RTD, order °C or °F and 1? or .1? resolution, 3.5 digit |
|
|
| |
| |
|
|
| |
|
| |
|
| Display |
| Display: |
0.56" or 0.8" (some models)
high LEDs |
| Display Color: |
Red (std) Green or Super Bright Red (optional) |
| Overrange: |
Display flashes “0000” |
| |
| 4 1/2 dgt - A/D Converter: |
16 bit dual slope |
| 4 dgt - A/D Converter: |
16 bit dual slope |
| 3 1/2 dgt - A/D Converter: |
12 bit dual slope |
| Accuracy: |
±(0.05% of reading + 2 or 3 counts) |
| RTD |
±(0.3% + 1 digit) |
| |
| Temp. Coeff.: |
100 ppm/°C (Typical) |
| Warm up time:: |
2 minutes to specified accuracy |
| Conversion Rate: |
3 conversions per second (Typical) |
| Impedance |
| DC mV Input Impedance: |
50KΩ/100KΩ/65KΩ in 50/100/200 ranges |
| 4-20mA Process Loop |
70Ω. Maximum 1.4V drop |
| DC Input Impedance: |
1MΩ (minimum) |
| AC Current Impedancce |
0.02Ω for 5A CT. Burden is only 0.5VA
0.1Ω for 1A CT. Burden is only 0.1VA |
| Hz/AC Voltage Impedance: |
4MΩ (minimum) |
| |
| Polarity: |
Bipolar, Assumed positive,
displays negative |
| Power Supply: |
120/240V AC, 50/60/400Hz. approx 1.5W. |
| (Optn) VO-DC/ISO: |
Isolated Switcher. 9 to 36V DC/12 to 24V AC |
| Optn) VO-24V: |
Isolated Transformer 24V AC ±10% |
| Optn) VO-5V DC: |
Non-isolated 5V DC ±10% |
| TB-KIT, Six Screw Terminals included Free with each UM Series meter |
| Consists of 3 insulated Quick Connects and 3 of Texmate’s patented individual
screw terminal blocks which attach directly to PCB inputs. These provide a
Quick Connect tab and screw clamp termination. Two TB-KITs are included
with all UM meter orders at no extra cost. |
| Optional Push-On Screw Terminal Connector for UM Series |
| Texmate’s exclusive Push-On Connector combines an edge card connector and a 10 position screw terminal
block. Push-On Connectors are preconfigured for specific Texmate meters and power supply voltages. |
| CN-PUSH/UM |
120 V AC |
| CN-PUSH/UM01 |
.200 / 240 V AC |
| CN-PUSH/UM02 |
Selectable 120 / 240 V AC |
| CN-PUSH/UM03 |
24 V AC |
| CN-PUSH/UM04 |
9-36 V DC / 12-24 V AC |
General: |
| Operating Temp.: |
–10 to 50 °C |
| Storage Temp: |
–20 °C to 70 °C. |
| Relative Humidity: |
95% (non condensing) |
| Case Dimensions: |
Bezel 4.06”Wx1.89”H (102.7Wx47.9Hmm)
Depth behind bezel 3.64" (92.22 mm) Plus
0.5 to .9” (12.7 to 22.8mm) depending on
connector used. |
| Weight: |
10oz., 13oz. when packed. |
|
|
| |
| |
|
|
|
|
| |
| |
 DPM Catalog Download |
|
|
|
|
|
 |
| |
Related urls: |
|
|
| |
- DU Series, 1/8 DIN Case
3 1/2 , 4 and 4 1/2 Digit with 0.56” LEDs
- UM Series,In Traditional USA NEMA Case
3 1/2 or 4 Digit with 0.56” LEDs
- RP Series, In Traditional USA NEMA Case 3 1/2 or 4 Digit with 0.56” LEDs
- CM, PM, SM, SP and TM, Series, Slim Case 3 1/2 or 4 1/2 Digit DMMs
- SD Series, 0.5” LCD Display, 1/8 DIN, Loop Powered
With Short Case
- BN Series, 3 1/2, 4 and 4 1/2 Digit with 0.56” LEDs,
in a 1/16 DIN Case
- MU Series, 1/32 DIN, Miniature DC V Meters,
3 1/2 Digit 0.315” LEDs
|
| |
|
|
|
|
|
|
|
.jpg){kind=small}
.jpg){kind=small}
