| |
|
|
|
|
| |
|
| |
| |
|
|
|
| |
- 3 1/2 and 4 1/2 Digit, 0.48”” high Red LEDs or LCD versions Available
- Ideal for size critical applications
- Accurate and Economically priced
- BCD output versiions available
- CM Series - loop powered meters
- DMV5 Seires - Multi-Range Mini Meter
- PM Series - General Purpose Meters
- SM Series - DC Micro-volt Resolution Meters
- SP Series - Signal Voltage Powered Meters
- TM Series - Temperature Meters
|
|
|
| |
| |
|
|
|
| |
|
|
CM series are 4-20 mA loop powered meters. with less than 1 V DC loop drop and 1 Joule energy storage . They are fully user scalable to
directly read in any engineering unit.
PM Series are general purpose slim style meters with 3.5 or 4.5 digit with LED or LCD displays. They are 5 vdc powered except for the PM35XAC series that can be powered by 115 VAC or 9 to 50 VDC. The PM45 series are available with BCD outputs to drive digital printers, digital
comparators, or to provide data for digital processor applications.
SM-35mV and SM-35XMV feature an unique constant current 5V DC power input circuit that eliminates
the ground loop problems and noise often encountered with low input voltage signals. This enables an
easy 3 wire, signal, ground and +5V DC power hook up. Both meters have wide scaling and offset capabilities
with fine and course adjustment. 20 mV, 200 mV and 2V DC header selectable input ranges are
provided.
The SP Series are Signal Voltage Powered Meters, ideal for battery backup systems. Meters are powered and measure DC voltage from 3.5 V DC to 199.9 V DC. The Display is blanked before reading can become
inaccurate with too low input signal (approx. 3.5 V DC)
The TM Series are stackable temperature meters. they have an unique differential input configuration allows several meters to be operated from the same
5V DC power supply with grounded Thermocouples . Select °C or °F and J or K.
n.b. Special meter inputs can be factory scaled. |
|
|
| |
| |
|
|
|
|
| |
| |
| CM Series : 4-20 mA Loop Powered Meters |
| CM-35XT |
Economical Loop-Powered, Process 4 to 20 mA, 0.48” LCD display |
| CM-35XTL |
Loop-Powered, Process 4 to 20 mA, 0.48” LCD display |
| CP Series : BCD Comparator |
| CP-45 |
BCD Comparator with relay. 5 V DC Power,Single set point, 4.5 digit BCD comparator controller |
| PM Series - General Purpose DC input Meters |
| PM-35U |
DCV input, 3.5 Digit LED Display, 5 V DC Power - Economy version |
| PM-35A |
Higher accuracy, DCV input, 3.5 Digit LED Display, 5 V DC Power |
| PM-35AR |
Higher accuracy, auto ranging, DCV input, 3.5 Digit LED Display, 5 V DC Power |
| PM-35X |
DCV input, 3.5 Digit LCD Display, 5 V DC Power |
| PM-35XAR |
Higher accuracy, auto ranging, DCV input, 3.5 Digit LCD Display, 5 V DC Power |
| PM-35XAC110 |
DCV input, 3.5 Digit LCD Display, 115VAC or 9V to 50VDC Powererd |
| PM-35XACAR1 |
DCV input, 3.5 Digit LCD Display, 115VAC or 9V to 50VDC Powererd |
| PM-45X |
DCV input, 4.5 Digit LCD Display, 5 V DC Power |
| PM-45XBCD |
DCV input, 4.5 Digit LCD Display, 5 V DC Power with BCD output |
| PM-45XMXBCD |
DCV input, 4.5 Digit LCD Display, 5 V DC Power with multiplexed BCD output |
| PM-45XU |
DCV input, 4.5 Digit LCD Display, 5 V DC Power |
| PM-45XUBCD |
DCV input, 4.5 Digit LCD Display, 5 V DC Power with BCD output - Economy version |
| PM-45XUMUXBCD |
DCV input, 4.5 Digit LCD Display, 5 V DC Power with multiplexed BCD output - Economy version |
| PM-45L |
DCV input, 4.5 Digit LED Display, Stable temperature compensated, 5 V DC Power |
| PM-45LBCD |
DCV input, 4.5 Digit LED Display, Stable temperature compensated, 5 V DC Power with BCD output - |
| PM-45LU |
DCV input, 4.5 Digit LED Display, 5 V DC Power - Economy version |
| PM-45LUBCD |
DCV input, 4.5 Digit LED Display, Stable temperature compensated, 5 V DC Power with BCD output -Economy version |
| SM Series : DC Micro-volt Resolution Meters |
| SM-35MV |
DCV input, 3.5 Digit LED display, 5 V DC Power |
| SM-35XMV |
DCV input, 3.5 Digit LCD display, 5 V DC Power |
| SM-35 |
DCV input, 3.5 Digit LED display, 5 V DC Power
Economy version |
| SM-35X |
DCV input, 3.5 Digit LCD display, 5 V DC Power
Economy version |
| SP Series : Signal Voltage Powered Meters |
| SP-35X |
DCV input, 3.5 Digit LCD display, 3.5V to 199.9V DC Powered |
| SP-35XMV |
DCV input, 3.5 Digit LCD display, DC currnet measurement, 50, 60 or 100mVDC Powered in 10v to 100VDC Systems |
| SP-35XRMS |
AC / DCV input, 3.5 Digit LCD display, 2 inputs 15-199.9 VAC/DC or 15-250 VAC/DC |
| TM Series : Temperature Meters - Type J & K Thermocouple Meters |
| TM-35JC |
°C, Type J input, 3.5 Digit LED display, 5 V DC Power |
| TM-35KC |
°C, Type K input, 3.5 Digit LED display, 5 V DC Power |
| TM-35XJC |
°C, Type J input, 3.5 Digit LCD display, 5 V DC Power |
| TM-35XKC |
°C, Type K input, 3.5 Digit LCD display, 5 V DC Power |
| TM-35JF |
°F, Type J input, 3.5 Digit LED display, 5 V DC Power |
| TM-35KF |
°F, Type K input, 3.5 Digit LED display, 5 V DC Power |
| TM-35XJF |
°F, Type J input, 3.5 Digit LCD display, 5 V DC Power |
| M-35XKF |
°F, Type K input, 3.5 Digit LCD display, 5 V DC Power |
| DMV Series : Mini Meters |
| DMV-5MV |
0.276" LED display, 3.5 Digit LED display, 5 V DC Power with ranges: 200mV, 2V,
20V, and 200V full scale. |
| DMV-5/RTD |
0.276" LED display, 3.5 Digit LED display, 5 V DC Power with RTD Sensor input |
| DMV-5/CL |
0.276" LED display, 3.5 Digit LED display, loop Power with ranges: 200mV, 2V,
20V, and 200V full scale. |
|
|
| |
| |
|
|
| |
|
| |
|
| Display |
| Display: |
0.4", 0.48" or 0.56"high LEDs
(depending on model)
0.48" Liquid Crystal Display (LCD) |
| DMV Series Display: |
0.276” (7mm), Red or Green, 0-1999 |
| Full Scale Ranges: |
| Standard: |
±199.9mVDC
±1.999VDC (standard)
±19.99VDC
±199.9VDC
±1200VDC |
| Auto Ranging Models: |
±199.9mVDC to ±1.999VDC (std)
±1.999VDC to ±19.99VDC
±19.99VDC to ±199.9VDC
±199.9VDC to ±1200VDC |
| 4-20 mAdc Series : |
Standard meter is adjustable to any scaling
between –1999 to +1999 without component
changes |
| TM Series: |
0 to 760°C
0 to 1400°F |
'J' Thermocouple |
0 to 1260°C
0 to 1999°F |
'K' Thermocouple |
| |
| Display Color: |
Red (std) |
| Polarity: |
Automatically displays either "+" or "–";
header programmable polarity disable and
reversal |
| Overrange: |
When input exceeds full scale on any range
being used, most significant "1" digit and
polarity symbol are displayed with all other
digits blank |
| Descriptors: |
Header programmable trailing dummy
zero,
°C or °F |
| Accuracy |
| CM series Accuracy: |
.±(0.05% of reading + 2 digits) |
| DMV series Accuracy: |
|
| PM series Accuracy: |
±0.05% of reading + 2 digit) typical |
| PM 4 1/2 digit : |
±(0.01% of reading + 1 digit)
±(0.015% of reading + 2 digits) for
200mV range. |
| PM 4 1/2 economy version : |
±(0.015% of reading + 2 digits)
±(0.02% of reading + 3 digits) for
200mV range. |
| SM series Accuracy |
.±(0.05% of reading + 2 digits) |
| SP series Accuracy |
.±(0.05% of reading + 2 digits) |
| TM series Accuracy |
±2°C + 1 Digit) typical
±(4°C + 1 Digit) maximum
±(3°F + 1 Digit) typical
±(5°F + 1 Digit) maximum |
| |
| A/D Converter: |
12 bit dual slope |
| Temp. Coeff.: |
100 ppm/°C (typical)
|
| |
PM Series |
| 3 1/2 Digit |
60 PPM/°C Typ. using internal
reference on 200mV and 2V |
| 4 1/2 Digit |
5PPM/°C in ratiometric operation;
50
PPM/°C Typ. using internal reference
on 200mV and 2V ranges |
| Warm up time:: |
1 minutes to specified accuracy |
| Conversion Rate: |
3 readings per second (nominal) |
| Impedance: |
| CM series
Impedance: |
1 volt drop @ 20 mA |
| PM
Impedance: |
Exceeds 1000MΩ on 200mV and
2V ranges; 10MΩ on all other
ranges |
| SM Series Impedance: |
1MΩ minimum |
| SP Series Impedance: |
|
| 100V |
50KΩ to 60KΩ |
| 40V to 100VDC |
30KΩ to 50KΩ |
| 3.5V to 40V |
10KΩ to 30KΩ |
| TM Series Impedance: |
1MΩ minimum |
| Power: |
| Most Models |
+4.5 to +5.5VDC at 200mA |
| ACA Models |
110VAC or 220VAC, 5% at 50Hz,
117V or 230VAC, 5% at 60Hz and
400Hz. Regulated 9VDC to 15VDC
at 6mA to 15mA |
| |
| PCB Edge Connector |
| Texmate’s exclusive Push-On Connector combines an edge card connector and a 10 position screw terminal
block. Push-On Connectors are preconfigured for specific Texmate meters and power supply voltages. |
| CNL-15 |
A standard 30-pin edge connector (two rows of 15 pins on
0.156" centers) may be used to connect the RP-Series of
meters. |
General: |
| Operating Temp.: |
–10 to 50 °C |
| Storage Temp: |
–20 °C to 70 °C. |
| Relative Humidity: |
95% (non condensing) |
| Case Dimensions: |
Bezel (2.755”W x 1.170”H) 69.68W x 29.72mmH
Depth behind bezel (3.315”) 84.2mm
Plus (0.685”) 17.4mm for connector |
| DMV Case Dimensions: |
1.38”Wx0.5”Hx1.77”D (35x12.7x45mm)
Front Bezel 1.46”x0.59” (37x15mm)
Panel cutout 1.38”x0.5” (35x12.7mm) |
| Slim Bezel Case |
The Slim Bezel case is compatible
with the TM, SM, PM, & SP Series of meters.The
CM-Series can be ordered in End Mount cases
for twin mounting or combinations of multiple
center mount cases and two end mount cases
for stack mounting. |
| Weight: |
87 gms (3.1 oz)
142 gms (5 oz) when packed |
| DMV Weight |
0.64 oz (19gms) |
|
|
| |
| |
|
|
|
|
| |
| |
 DPM Catalog Download |
|
|
|
|
|
 |
| |
Related urls: |
|
|
| |
- DU Series, 1/8 DIN Case
3 1/2 , 4 and 4 1/2 Digit with 0.56” LEDs
- UM Series,In Traditional USA NEMA Case
3 1/2 or 4 Digit with 0.56” LEDs
- RP Series, In Traditional USA NEMA Case 3 1/2 or 4 Digit with 0.56” LEDs
- CM, PM, SM, SP and TM, Series, Slim Case 3 1/2 or 4 1/2 Digit DMMs
- SD Series, 0.5” LCD Display, 1/8 DIN, Loop Powered
With Short Case
- BN Series, 3 1/2, 4 and 4 1/2 Digit with 0.56” LEDs,
in a 1/16 DIN Case
- MU Series, 1/32 DIN, Miniature DC V Meters,
3 1/2 Digit 0.315” LEDs
|
| |
|
|
|
|
|
|
|
.jpg){kind=small}
.jpg){kind=small}
