SEW® Standard Electric ST38U Series

1 1/2″ Analog Panel Meters

space
SEW ST38U Series, Analog Panel Meters
space
Characteristics :
  • Ideal for OEM applications
  • Case and Composition : Acrylic Resin front and bakelite case
  • Four Stud mounting.
  • Accuracy : 2.5 % of full scale
  • Colour : Black case and white scale plate.
  • Pointer : Tube type, colour in red
Product Description:
space
The ST 38U are reliable meters with a sturdy movement and backelite back, ideal for OEM applications. They are suitable for many applications requiring a low cost solution. Typical uses:Test Equipment, Power Supplies, Emergency Lighting, Chargers, Recreational Equipment, etc.
space
Specifications :
space
space
Display
Scaling: Customized to any scaling desired, from linear to specialized Cos Ø, square root distributions, with color applications for visual emphasis and to any desired engineering units.
Specific accuracies
Basic Accuracy: ±2.5% of full scale basic accuracy class.
Rectifier Type Meters: ±3.5% of full scale basic accuracy class.
Repeatability: ±3% for Pivot and Jewell
Position of use: Vertical (scale) standardor to specified angle or position
Full scale deflection: 90 °
Movement: Pivot and Jewel
In this design the coil and pointer are supported by polished steel pivots at each end which fit into jewel bearings. Pivot and jewel meters are recommended for high vibration environments because of the mechanism’s inherent stability and strength. Accuracy and repeatability are almost equal to the taut-band’s, and good performance from the pivot and jewel construction is the reason for its long popularity.
Case: Acrylic resin front and bakelite back
Mounting: 2 stud
OverShoot: 20% Maximum
Response time: Above 50µA-2 sec. max.below 50µA – 3 sec, max.
General:
Operating Temp.: 0 to 40°C (32 to 104°F)
Storage Temp: -10 to 50°C (14 to 50°F)
Relative Humidity: 95% (non condensing)
space
pdf_pic Downloads: Not Available
base
spacespace