Characteristics :

• Ideal for OEM applications
• Case and Composition : Acrylic Resin front and bakelite case
• Four Stud mounting.
• Accuracy : 1.5 % of full scale
• Pointer : black, sword style pointer
• For ranges higher than 20A DC, use external shunt
• For ranges higher than 300V DC, use external Multiplier
• For ranges higher than 5A AC, use external Current Transformer
• For ranges higher than 600V AC, use external potential Transformer

A low cost alternative for replacing mini switchboard meters, ideal for OEM applications and a bonus of a 1.5 % DC and 2.5% AC Accuracy.These meters feature extra wide scales, big bold numerals above the scale and divisions for unobstructed reading.

Display
Scaling:	Customized to any scaling desired, from linear to specialized Cos Ø, square root distributions, with color applications for visual emphasis and to any desired engineering units.
Specific accuracies
Basic Accuracy:	1.5 % of full scale, basic accuracy class.
Rectifier Type Meters:	±3% of full scale basic accuracy class.
Repeatability:	±3% for Pivot and Jewell
Position of use:	Vertical (scale) standardor to specified angle or position
Full scale deflection:	250 °
Movement:	Pivot and Jewel
	In this design the coil and pointer are supported by polished steel pivots at each end which fit into jewel bearings. Pivot and jewel meters are recommended for high vibration environments because of the mechanism’s inherent stability and strength. Accuracy and repeatability are almost equal to the taut-band’s, and good performance from the pivot and jewel construction is the reason for its long popularity.
Case:	Acrylic Resin cover, plastic meter body, Bakelite terminal plate. Four stud mounting.
Mounting:	4 stud
OverShoot:	20% Maximum
Response time:	Above 50µA-2.5 sec. max.below 50µA – 3.5 sec, max.
Size:	82 mm x 82 mm – 72 mm Long
General:
Operating Temp.:	0 to 40°C (32 to 104°F)
Storage Temp:	-10 to 50°C (14 to 50°F)
Relative Humidity:	95% (non condensing)