| Input |
| Voltage: |
115 / 230V selectable, ± 15 % variation
47 - 63 Hz |
| Fuse: |
115 VAC, 230VAC -- 3.15A fast acting 250VAC |
| Dielectric Withstand Test Mode |
| Output Voltage: |
Rating = AC 0 - 5000V, 2V / step, 12mA
DC 0 - 6000V, 2V / step, 5mA
Regulation = ± (1 % of output + 5V) |
| Voltage Setting: |
0V - Max output rating, 10 volts/step
Accuracy = ± (2 % of Setting + 5V)
(relative to displayed output)
Can be adjusted during operation via arrow keys. |
| Output Frequency: |
DC and 50 / 60 Hz selectable |
| Wave Form: |
Sinewave, Distortion : <2 % THD |
| Ripple: |
< 5 % at 6KVDC / 5mA |
| Dwell Time Setting: |
0 and 0.2 - 999.9 seconds, 0.1 second / step
“0” for continuous running |
| Ramp Time Setting: |
0 and 0.2 - 999.9 seconds, 0.1 second / step
0 ramp setting = 0.1 seconds |
| Failure Setting: |
AC mode
High limit = 0.10 - 12.00 mA, 0.01 mA / step
Low limit = 0.00, 0.10 - 12.00 mA, 0.01 mA / step (0= OFF)
Accuracy = ± (2 % of setting + 0.02 mA)
|
DC mode
Low limit = 0.02 - 5.00 mA, 0.01 mA / step
High limit = 0.00, 0.02 - 5.00 mA, 0.01 mA / step (0= OFF)
Accuracy = ± (2 % of setting + 0.02 mA) |
| Metering: |
Voltmeter (4 digits)
Range =
AC 0.00 - 5.00 KV
DC 0.00 - 6.00 KV
Resolution = 0.01 KV
Accuracy = ± (2 % of reading + 10 V) |
Ammeter (4 digits)
Range = AC 0.10 - 12.00 mA
DC 0.02 - 5.00 mA
Resolution = 0.01 mA
Accuracy = ± (2 % of reading + 0.02mA) |
| Timer Display: |
Range = 0.0 - 999.9 seconds
Resolution = 0.1 second
Accuracy = ± (0.1 % of reading + 0.05 seconds) |
| Discharge Time: |
≤300 ms
The maximum capacitive load vs output voltage: |
0.20 µF --- < 1KV
0.10 µF --- < 2KV
0.06 µF --- < 3KV |
0.050 µF --- < 4KV
0.040 µF --- < 5KV
0.015 µF --- < 6KV |
| Ground Continuity Check: |
Current = DC 0.1 A ± 0.01A, fixed
Max. ground resistance = 1Ω ± 0.1Ω, fixed |
| Insulation Resistance Test Mode |
| Output Voltage: |
Range = 100 - 1000 Volts DC
Resolution = 10 volt/step
Accuracy = ± (2% of reading + 5 volts) |
| Voltage Display: |
Range = 0 - 1000 V
Resolution = 10 volt/step
Accuracy = ± (2% of reading + 2 counts) |
| Resistance Display |
| Range: |
1 - 1000 MΩ(4 Digit, Auto Ranging) |
| Resolution : |
MΩ |
500VDC
MΩ |
1000VDC
MΩ |
0.01
0.1 |
1.00 - 40.00
35.0 - 999.9 |
1.00 - 80.00
75.0 - 999.9 |
| Accuracy: |
± (3% of reading + 2 counts) at test voltage > 500V
± (7% of reading + 2 counts) at test voltage ≤ 500V |
| High Resistance Limit |
Range = 0 - 1000 MΩ (0 = Off) |
| Low Resistance Limit |
Range = 1 - 1000 MΩ |
| Delay Timer |
Range = 0, 0.5 - 999.9 sec (0 = Constant)
Resolution = 0.1 sec/step
Accuracy = ± (0.1% + 0.05 sec) |
.jpg){kind=small}
.jpg){kind=small}
