Electro-Meters: 2660 Series, 60 Amp Ground Bond Tester


>		Controllers and Indicators

>		DC Power Supplies and Electronic Loads

>		Enclosures

>		Fiber Optic Testers

>		Mass Interconnect Solutions

>		Motor Testing Equipment

>		Panel Meters (Analog)
>		Panel Meters (Digital)

>		Portable Test Instruments

>		Power Sources (AC)

>		Power Protection

>		Pressure Instruments

>		Shunts

>		Temperature Sensors, Transmitters and Sealing Assemblies

>		Test and Measurement Instrumentation

>		Transducers

>		Transformers


>		Accuenergy

>		AEMC Instruments

>		Array Electronics

>		Associated Power

>		ATS Systems

>		Bauser

>		Conax

>		Deif A/S

>		Electro-Meters

>		Fibox

>		Gossen GMBH

>		Hsiang Cheng

>		Jewell

>		ITI Transformers

>		Magtrol

>		Megger

>		Monarch Instrument

>		Senex

>		Slaughter

>		Standard Electric

>		Superior Electric

>		Texmate

>		Triplett Corp.

>		Virginia Panel Corp.

>		Yokogawa

Slaughter 2660 Series, 60 Amp Ground Bond Tester


	< Links >


Characteristics:


Tamper proof front panel controls Multiple Test Memories Low-current sense Simple Menu Control Electronic dwell settings Electronic ramping Front panel LCD No load setup of trip current and output voltage Storage of test program Output voltage fine adjustment PLC remote inputs and outputs Software calibration control Current monitoring Line and load regulation Flashing high voltage indicator Single Step Test Mode Continuous Duty Cycle Ratings Milliohm Offset Capability Adjustable Output Current and Milliohm Trip Currents Fail Stop ON/OFF Mode

Product Description:

The 2660 is a 60 Amp Ground Bond tester that can be used stand alone or interconnected to a Slaughter Hipot teters. With the 2660, manufacturers can cost-effectively meet safety agency requirements for higher current Ground Bond testing. It includes such features as a liquid crystal display, menu driven control, electronic dwell, 5 test set up memories, front panel lockout and milliohm offset capability. The 2660 is also UL and TÜV safety agency listed.

Specifications :

Input
Voltage:	115 / 230V selectable, ± 10% variation 50 - 60 Hz ± 5%
Fuse:	6.3A slow blow 250VAC
Dielectric Withstand Test Mode
Output :	Current: AC 3 - 30Amps, 0.1 Amp Regulation: ±(2% of Setting + 0.02 A) Voltage: AC 6 Volts fixed
Output Frequency:	50 / 60 Hz selectable
Dwell Time Setting:	0 and 0.5 - 999.9 seconds, 0.1 second 0 for continuous running Accuracy: ±(0.1% of Setting + 0.05 seconds)
High Limit Settings:	High Limit: 0 - 600mΩ for 0.00 - 15.00 Amps, 1mΩ 0 - 300mΩ for 15.01- 30 Amps, 1mΩ 0 - 150mΩ for 30.01- 60 Amps, 1mΩ
	Accuracy: ±(2% of setting + 2mΩ)
Milliohm Offset:	Max. Offset Capability: 100mΩ, 1mΩ Accuracy: ±(2% of setting + 2mΩ)
Metering:	Ammeter (3 digits) Range: 0 - 60 Amps Resolution 0.1 Amp Accuracy: ±(3% of Reading + 0.03A)
	Ohmmeter (3 digits) ange: 0 - 600mΩ Resolution: 1 mΩ Accuracy: ±(3% of Reading +3mΩ) for 3-5.9 Amps ±(2% of Reading +2mΩ) for 6-60 Amps
	Timer (4 digits) Range: 0 - 999.9 seconds Resolution: 0.1 seconds / step Accuracy: ±(0.1% of Reading + 0.05 seconds)

Downloads:

Downloads: General Specifications

Related urls:

General Information
Remote Control and Signal Output
The following input and output signals are provide through two 9 pin D type connectors;
1. Remote control: Test, Reset and Withstand Processing
2. Outputs: Pass, Fail, Test in Process, Start Out, and Reset Out

Security
Key Lock capability to avoid unauthorized access to all test parameters. Memory Lock capability to avoid unauthorized access to Memory locations.

Line Cord
Detachable 6 ft. (1.80m) power cable terminated in a three prong grounding plug.

Treminations
5ft. (1.52m) high current and return leads with clips.

Dimension
(W x H X D)
11 x 3.5 x 14.56 in.
(280 x 89 x 370mm)

Weight 20 lbs (9 Kg)