Spacer Home Contact_us ob Opportunities ISO_Registration Privacy_Statement
 
index
Caption_Header
Megger ®
BM121 and BM122 Series
Insulation and Continuity Testers 		 
previous URL Next URL
< Links >
 
 
 
Megger BM120 Insulation Tester
 
  Characteristics:  
 
 
  • Tests insulation at rated voltage into a 1 mA load
  • 200 mA short circuit continuity current
  • Automatic discharge of circuit under test
  • Visual warning of energised circuits above 25 V
  • Designed to International Safety Standards
  
 
  Product Description:  
 

 

 

space

The Megger® BM120 Series of Digital Insulation and Continuity Testers offers a cost effective solution to testing where only basic test facilities are required. Instruments are available with single insulation test voltages of 500 V d.c. or 1000 V d.c. and test results are displayed on a clear 3-digit autoranging liquid crystal display. Full rated test voltage is produced when supplying up to 1 mA load.

Both instruments offer hands free continuity measurement with a short circuit current of greater than 200 mA and an open circuit voltage of 5 V.

If either instrument is connected to a system which is energised to greater than 25 V, a warning symbol on the display will flash. Under this condition an insulation or continuity test cannot be carried out and the instrument will therefore automatically inhibit any further action until the source of voltage has been removed.

Although insulation tests should only be carried out on de-energised systems, the instruments are protected against accidental connection to phase to earth voltages up to 300 V a.c. and phase to phase voltages of 440 V a.c., Installation Category III.

Further indicators illuminate to show a low battery state and if the protective fuse has ruptured. The instruments will automatically shut down after 5 minutes of non use.

  
 
  General Description:  
 
  • The BM120 Series will find applications in domestic and industrial electrical contracting and in site maintenance departments.
  • Both instruments may be used on capacitive circuits since, at the end of an insulation test, the circuit under test will be automatically discharged through 360 k½ internal resistance.
  • The BM120 Series of Insulation and Continuity Testers are ideal for testing transformers, motors, generators, switchgear, domestic appliances, power tools etc. as well as fixed wiring systems.
  • Although low cost, both instruments meet the requirements of most International Standards including VDE0413 Part 1, HD384, IEC364 and BS7671 (the 16th Edition of the IEE Wiring Regulations).
  • This ensures that the rated insulation test voltage can be achieved into a 1 mA load, ie. 500 V into a 500 k½ load or 1000 V into a 1 M½ load.
  • FEATURES AND BENEFITS
    • Insulation test ranges produce the rated test voltage into a 1 mA load. Testing can be carried out to International Standards requirements.
    • Single test voltage avoids accidentally overstressing the insulation of the item under test.
    • Clear three digit liquid crystal display produces unambiguous test results.
    • Automatic discharge of capacitive items following an insulation test ensures that circuits are not left dangerously charged.
    • Continuity range has 0,01 ½ resolution and a short circuit current in excess of 200 mA to meet the requirements of International Standards.
    • No need to press the test button when continuity testing leaves both hands free.
    • One button turns instrument on and operates insulation test.
    • Automatic switch-off after 5 minutes.
  
 
  Specifications:  
space
 
Insulation Ranges
BM121 500V
BM122 1000V
Measuring Range:
Digital: 0,01 MΩ to 999 MΩ
Test Current on load:

1mA at minimum pass values of insulation as specified in BS7671, HD384, IEC364 and VDE0413 part 1.

Accuracy (at 20°C): ±3% of reading ±2 digits up to 10 MΩ
±5% of reading ±2 digits up to 100 MΩ
±30% of reading up to 999 MΩ
Continuity Range:
Measuring Range: 0,01 Ω to 9,99 Ω
10,0 Ω to 99,9 Ω
Short Circuit Current: 0,01 Ω to 9,99 Ω 210 mA
10,0 Ω to 99,9 Ω 21 mA
Accuracy: 0,01 Ω to 9,99 Ω ±3% ±2 digits
10,0 Ω to 99,9 Ω ±5% ±2 digits
Automatic Discharge
When the test button is released after an insulation test the item under test will be automatically discharged through 360 kΩ internal resistance..
Voltage Warning
Symbol flashes on the display and the buzzer sounds intermittently in the presence of more than 25 VAC, VDC
Auto Shut off
The instrument will automatically switch off after 5 minutes’ inactivity. If the instrument is not to be used for several months, it is recommended that the batteries be removed from the instrument.
Power
Battery Type: 6 X 1,5 V cells IEC LR6 type. Nickel Cadmium rechargeable cells may be used.
Battery Life: Typically more than 2000 tests each of 5 second duration.
 
 
  Downloads:  
space
 
  pdf_pic Downloads: General Specifications  
space space
base

Safety
 The instrument(s) meet the requirements for double insulation to
IEC 1010-1 (1992), EN 61010-1 (1993) to Category III, 300 V
phase to earth and 400 V phase to phase.

EMC
 In accordance with IEC61326 including Amendment No.1

Overload Ratings
 The instrument may be continuously connected to a 300 V phase to earth, 440 V phase to phase category III supply without damage. An overload of 720 V rms. for 10 seconds will not cause damage to the instrument.

Installation Category
 Category III: Fixed Wiring and installations within a building.

General
Fuse:
 The instrument is fitted with a 500 mA(F) 440 V ceramic 32 x 6
mm. HBC 10 kA fuse..

Environmental
Conditions
 Operating range:
-20°C to +60°C up to 100 MΩ
-20°C to +40°C over full range

Operating humidity:
 90% RH at 40ºC max. Storage

Dimensions
 195 x 98 x 40 mm. (5 in x 2,4 in x 1 in approx.)

Weight:
530 gm. (1,16 lbs approx.)
 

© 2006-2007 Electro-Meters.com
Head office located at: 900 McKay Rd., Pickering, Ontario L1W 3X8 (click for map)
Sales: 905.428.3413 | Toll-Free: 800.617.3413 | Fax: 905.428.6086 | E-Mail: sales@electro-meters.com
All descriptions and specifications are subject to change without notice
Privacy Notice | Conditions of Use.
 
Scroll down
 
scroll
 
  scroll up  
 
index web