| The Megger‚ TDR500 cable fault locator breaks new
ground as a cost effective high specification hand held
Time Domain Reflectometer (TDR) for locating faults on
metallic cables.
Designed for the field engineer requiring a low cost
solution to field testing, the TDR500 offers all the benefits
of Megger build quality and reliability in a high quality
affordable package.
Transmission line testing
The TDR500 is suitable for virtually all types of
transmission cable including twisted pair, coaxial and
parallel conductors. Condition of the entire cable or
section is displayed graphically.
30m to 3 km Range
Suitable for identifying and locating a range of cable faults
from a few metres up to 3 Km on non-energised cables.
Cable characteristics are clearly displayed on the 122 x 32
pixel LCD display.
Simple Operation
Operation of the TDR500 is simplicity itself. No multifunction
keys to confuse the operator. Each button has its
own dedicated function.
Just connect the test lead to the de-energised cable to be
tested. Switch on the TDR and set the Velocity factor.
Cable route tracing
The TDR500 can inject an oscillating 810 Hz/1.11 kHz tone
onto the de-energised transmission line or power line.
The warble tone allows the engineer to trace the faulty
cable pair with the use of a commercially available tone
tracing probe. |
.jpg){kind=small}
.jpg){kind=small}
