| The TDR1000/2 is a hand held, compact Time Domain
Reflectometer for locating faults on metallic cables. It has a
minimum resolution of 0.1m/0.3ft and a 3km/9kft
maximum range depending on Velocity factor selected and
cable type.
Four output impedances are available (25, 50, 75, and 100
ohms) and a velocity factor between 0.2 and 0.99 will meet
any cable test requirements
- The MEGGER TDR1000 features all the benefits of a simple low cost hand held TDR
- Ease of use is a key feature and with a simple ‘one Key one function’ approach.
- Automatic Event Location further simplifies operation producing a reduction in training time and product familiarization
Enhanced key pad navigation
Control of the TDR1000/2 has been simplified with each
key having a dedicated function, such as cursor left and
right, Velocity factor, range etc. Training times are
dramatically reduced, and with less chance of time
consuming mistakes, productivity is improved.
TX Null
TX Null eliminates the ‘dead zone’ at the start of the
displayed trace, normally obscured by the transmission
pulse. By adjusting the TX Null control the user can see
these ‘near end’ faults clearly.
Fast Find key
Reduces the time taken to find major reflections on the
cable. One press of the find key automatically adjusts the
range and gain and positions the cursor to the major event
on the cable within seconds, removing the need for the
engineer to gradually scroll through the ranges looking for
the fault or the end of cable reflection. |
.jpg){kind=small}
.jpg){kind=small}
